Corrosion causes the majority of drill pipe loss and damages casing, mud pumps, bits, and downhole tools. As downhole temperatures increase, corrosion also increases at a corresponding rate, if the drill string is not protected by chemical treatment. Corrosion inhibitor is the most common method to reduce water on the corrosion of equipment, extending its life, increase productivity.
WS BIOCIDE-AM is an effective quaternary ammonium compound based bactericide used mainly for control of mixed bacteria, fungi and yeast. It is readily water soluble and inhibits growth of bacteria with good penetrating qualities.
enquire nowWS BIOCIDE-ALD is an micro biocide with effective blend of Glutaraldehyde bases with biodegradable ingredients used as an effective source against sulphide forming and control of mixed bacteria, fungi and yeast. It is readily water soluble and inhibits growth of bacteria with good penetrating qualities with no odour or vapour and is also effective over a wide range of Ph and temperature.
enquire nowWS CORAMINE is an amine based corrosion inhibitor which is effective for sodium, potassium, calcium, and zinc brines. It is a water soluble, film forming amine that can be used at high temperatures. It is used to control or prevent internal corrosion attack from oxygen, cabon dioxide and hydrogen sulphide in oil & gas production systems, injection systems and pipelines. When used it forms like a protective film on all metal surfaces and also protects metal surfaces at high temperatures.
enquire nowWS SULFA- SCAV S is mainly used as the name suggest to scavenge sulphide thus protecting rig people from it and the equipment from sulphide stress corrosion. It is a non-hazardous granular material used in the removal of hydrogen sulfide (H2S) from natural gas streams. WS SULFA-SCAV S is solid, unlike nearly all other scavengers which are liquids, and therefore prevents foaming or carryover.It is most effective over wide range of pH and is non corrosive to metals.
enquire nowWS OXYGEN-SCAV S is dosed in drilling fluids where even the smallest amount of oxygen can cause corrosion to the system which could include piping and equipment made of commonly used materials of construction such as carbon steel. It is used to scavenge or eliminate dissolved oxygen thus acting as an corrosion inhibitor in water based drilling mud systems. It is a stable solid and does not deteriorate when exposed to the atmosphere for extended periods of time.
enquire nowWS OXY-SCAV L is an effective blend of active sulphite based chemicals and inorganic chemicals. It is dosed in drilling fluids where even the smallest amount of oxygen can cause corrosion to the system which could include piping and equipment made of commonly used materials of construction such as carbon steel. It is used to scavenge or eliminate dissolved oxygen thus acting as an corrosion inhibitor in water based drilling mud systems.
enquire nowCorrosion causes the majority of drill pipe loss and damages casing, mud pumps, bits, and downhole tools. As downhole temperatures increase, corrosion also increases at a corresponding rate, if the drill string is not protected by chemical treatment. Corrosion inhibitor is the most common method to reduce water on the corrosion of equipment, extending its life, increase productivity
WS CORIN Am is an amine based corrosion inhibitor, prime function as the name suggest is to control or prevent internal corrosion attack from oxygen, cabon dioxide and hydrogen sulphide in oil & gas production systems, injection systems and pipelines. When used it forms like a protective film on all metal surfaces and also protects metal surfaces at very high temperatures.
enquire nowWS HySul Scav is commonly known as Zinc Carbonate and is a widely available chemical, prime function as the name suggest is to scavenge sulphide thus protecting rig people from it and the equipment from sulphide stress corrosion. It is most effective over wide range of pH and is non corrosive to metals.
enquire nowWS Oxy Scav is an effective blend of active sulphite based chemical and inorganic chemicals, it is used to scavenge or eliminate dissolved oxygen thus acting as an corrosion inhibitor in water based drilling mud systems.
enquire nowWS Cide Am is an effective quaternary ammonium compound based bactericide used mainly for control of mixed bacteria, fungi and yeast. It is readily water soluble and inhibits growth of bacteria with good penetrating qualities.
enquire nowWS Cide Ald is an micro biocide with effective blend of Glutaraldehyde bases with biodegradable ingredients used as an effective source against sulphide forming and control of mixed bacteria, fungi and yeast. It is readily water soluble and inhibits growth of bacteria with good penetrating qualities with no odour or vapour and is also effective over a wide range of Ph and temperature.
enquire nowWS EMUL P is an primary emulsifier is multiutility product which can be used for many uses, primarily to provide improved emulsion and for filtration control, as a secondary wetting agent, temperature stability and viscosity. We manufacture emulsifier’s as per client requirements.
enquire nowWS EMUL S is an secondary emulsifier again a multiutility product which has uses similar to Primary emulsifier. We manufacture emulsifier’s as per client requirements.
enquire nowWS Plug is commonly known as Granulated Walnut shell, It is crushed into 3 sizes Fine, Medium and Coarse as per customer requirements. Used to control loss circulation it will not ferment and remains unaffected by Ph or temperature. Compatible with both water and oil based drilling fluids it provides high compressive strength and proves to be an excellent plugging material.
enquire nowWS Mica is crushed into 3 sizes Fine, Medium and Coarse as per customer requirements. An effective as well as economical way to control loss circulation and is a common oilfield product. Compatible with other LCM products it does not effect the properties of water and oil based drilling fluids.
enquire nowWS Carbonate is commonly known as ground Limestone. It is crushed into 3 sizes Fine, Medium and Coarse as per customer requirements. Used to reduce fluid loss as a LCM and as a bridging agent for both water based and oil based fluid systems.
enquire nowWS EP LUBE is a High temperature Extreme Pressure Lubricant, dark coloured liquid free from visible impurities. Lubricants specially designed to reduce torque and drag in water based mud systems leading to reduced corrosion. It does not affect rheology or gel strength.Lubricants are available in different grade as per operation/client requirement.
enquire nowWS Mud Detergent is a clear liquid and a mix of anionic and non-anionic surfactants. It is used for the purpose of reducing the surface tension and it is a powerful wetting agent. This promotes the setting of mud pH and reduces the balling of shale cutting and causes an increase in penetration rate. It is also a good emulsifier & lowers the torque and drag.
enquire nowWS Defoamer has the performance of high versatility, speed defoaming, long durability in suppression of bubble, quickly spread and simple and convenient usage way. It can be used in most of water based drilling fuid. It is utilized to reduce surface tension in water based drilling fluids as well as solids free work over and completion fluids.It also stabalizes pump pressure by removing trapped gas / air. It is effective at high temperartures and varied pH levels in water based muds.
WS CPG ( Cloud Point Glycol) is used as shale inhibitors.It is water miscible cloud point Glycol of Low toxicity and a multifunctional additive for drilling fluids. It is used in water based drilling fluids to improve lubricity and shale stability and extends the temperature stability .It remains unaffected by contaminants, providing high rate of penetration with enhanced inhibition and lubricity for the drilling mud.
We provide WS CPG as per customer requirement for cloud point.
WS Sulfo-Plast is a Sulphonated Asphalt-Black to brown coloured powder.It is water soluble used primarily for shale control.It reduces torque,drag and differential sticking. It is also used as drilling fluid treating agent, can effectively seal crosses the stratum micro crack, prevented the flaking shale caves, suppression shale hydration. Besides, it has good ability in lubrication, emulsification, reduces the filter loss and the high temperature stability. It is compatible to both water and oil based mud systems.
enquire nowWS Sodium Silicate acts as a first source of inhibition for silicate based drilling fluids. It provides superior shale stability, regardless of shale type. Eighty years later, silicates are still recognized as the most effective water-based shale inhibitor. It can also be used in offshore operations where liquid cement additives are the preferred products.Liquid additives such as sodium silicate allow custom preparation of the cement slurry at the drill site.Sodium silicate is frequently used in drilling fluids to stabilize borehole wells and to avoid the collapse of bore walls.
enquire nowWS Potassium Silicate acts as a first source of inhibition for silicate based drilling fluids. Silicates are well-known as shale stabilizers providing coating and chemistry to prevent swelling and collapse in water. Potassium silicate-based drilling fluids are used in land-based drilling as an environmentally friendly shale stabilizer.
enquire nowWS Gil is blackish coloured, fine grained Gilsonite Powder used commonly in packing of 25 kg sacks. Gilsonite has been used in drilling fluids as an additive to assist in borehole stabilization. It has been well documented that this material works efficiently to minimize hole collapse in unstable shale sections. Gilsonite is used in drilling mud fluids and oil well cementing. The use of Gilsonite to oil well cements reduces slurry weight without loss of compressive strength and acts as an effective bridging and plugging agent to seal fractures in weak formations while cementing.
enquire nowWS Stuck free -Pipe freeing agents is a blend of emulsifiers, gelling and suspension agents and wetting agents in one drum.WS Stuck Free prime function is to lubricate the wall thus reduces contact between the pipe and the wall. It is used for preparing a fluid for freeing pipe that is differentially stuck ensuring efficient operation by penetrating and breaking the water based mud filter cake. Stuck free typically are formulated with a base fluid and additives that can be incorporated into the active mud system with no adverse effects after the pipe is freed and/or circulation resumes.
WS Ben-Gel ( API Bentonite) is used as a viscosifying agent in water based mud systems. Sodium Bentonite expands when wet, absorbing many times its dry mass. Because of these colloidal properties, it is often used in drilling mud in the Oil and Gas Industry and in Environmental investigations. Another conventional use of bentonite is as a mud constituent for oil- and water- well drilling. Its role is mainly to seal the borehole walls, to remove drill cuttings and to lubricate the cutting head. It can also be used as a viscosifier and filtration control agent in all water based muds in oil drilling.
enquire nowWS Ben-Gel NT is a formulated compound of Bentonite & Sodium Montmorillonite as per API standard for Non-Treated Bentonite. Non Treated Bentonite is a premium-grade Wyoming bentonite , which has not been chemically treated. It is used as a primary filter cake building, filtration control and suspension agent in freshwater systems, and has application in all water base mud systems. It is a cost-effective product for achieving viscosity, controlling fluid loss and maintaining filter cake quality in freshwater and seawater muds.
enquire nowWS CMC, full name Carboxy Methyl Cellulose of Low Viscosity and High Viscosity, free from extraneous impurities is widely available low cost polymer providing viscosity for fluid loss control. It is a cost effective additive used as a fluid loss reducer in fresh water and brackish water systems. It is used to control fluid loss in dispersed and non-dispersed drilling fluids. Its main advantages like providing shale inhibition, help to reduce friction pressure and builds a protective colloid on the surface of the drilling well wall. Compatible with other drilling fluid additives, economic and effective API fluid loss reducer, resists attack from bacteria, requiring no preservatives or bactericide, Environmentally acceptable.
enquire nowWS PAC LV/R can be used in various drilling fluid systems and shows very good fluid loss reducing capability especially in salt water, sea water and saturated salt water drilling fluids. WS PAC available in different grade ( Technical & Pure).It ‘s cream coloured free flowing powder free from extraneous impurities, pure quality polymer used as filtration controller for water based drilling fluids to the extent that even small quantities of the same maintains excellent fluid loss control.
enquire nowWS HEC- HEC is used to increase viscosity in clear brine fluids. HEC is compatible with other drilling fluid additives. It performs very well in drilling, completion, workover and fracturing processes. It is mainly used as a thickener in brine, in addition to many special applications. Hydroxy Ethyl Cellulose has excellent salt tolerance of the electrolyte. As Hydroxy Ethyl Cellulose is a non-ionic material, in the aqueous medium it will not get ionized, or produce precipitated residues due to the occurrence of high concentrations of salts in the system, resulting in a change in the viscosity.
enquire nowWS CLAY AT ( Attapugite) is also known as Salt water clay, used to increase the viscosity and suspension properties in salt saturated brine systems. Also used for controlling loss of circulation.
enquire nowThe main use of guar gum is in top hole oil well drilling. WS Guar is suitable for use in oil well fracturing, oil well stimulation, mud drilling and serves as a stabilizer, thickener and suspending agent. High viscosity Guar Gum products are used as drilling aids in oil well drilling, geological drilling and water drilling. These products are used as viscosifiers to maintain drilling mud viscosities that enable drilling fluids to remove drill waste from deep holes.
enquire nowWS ZanGum ( Xanthan Gum ) is highly effective viscosifier which is stable over a wide range of PH values and provides viscosity to water based drilling and completion fluids. High viscosity of solutions and water solubility of the polymer have created important applications for xanthan in the oilfield industry where it is commonly used in drilling fluids and in enhanced oil recovery processes. Xanthan gum provides great “low end” rheology. When the circulation stops, the solids still remain suspended in the drilling fluid. The widespread use of horizontal drilling and the demand for good control of drilled solids has led to its expanded use. It has also been added to concrete poured underwater, to increase its viscosity and prevent washout.
enquire nowWS Star (Starch) is a non fermenting one and is available in different grades. Starch is used for reducing fluid loss in a variety of water based drilling fluids and has beneficial secondary effects on mud rheology. It is pregelinated to give maximum effect and provides wellbore stability. High quality biocide added to resist against bacterial and enzymatic degradation.
enquire nowWS STAB RFL, full name Partially Hydraulised Poly Acrylamide ( PHPA) is primarily used for its efficiency in reducing fluid loss and maintaining hole stability and is compatible with most drilling fluid products. The polymer is anionic, attaches itself to the positively charged edges of clay platelets, thus binding the particles together. It can inhibit cuttings dispersion to make solids removing easily and effectively. The adsorbed polymer also lowers the speed of water penetration into shale. Thus improving well bore stability. It is a co-polymer of anionic character and high molecular weight. It is a water soluble polymer, which is primarily used as a highly efficient fluid loss reducer, viscosifier and protective colloid for shale’s and cutting in fresh water, calcium, sodium brines and KCL mud systems. It is compatible with most of the drilling fluid products, biopolymers, PAC, CMC etc. It maintains hole stability by preventing shale swelling and erosion.
enquire nowWS Bar is a free flowing baritepowder having specific gravity of Min 4.2 . Barite (Barium Sulphate-BaSO4) is an inert mineral. Barite (BaSO4) is a nonmetallic mineral used as a weighting agent in drilling muds in the oil and gas industry, due to its relatively high specific gravity (4.2). Barites are mined in many areas worldwide and shipped as ore to grinding plants in strategic locations, where API specifies grinding to a particle size of 3 to74 microns. Pure barium sulfate has a specific gravity of 4.50, but drilling-grade barite is expected to have a specific gravity of at least 4.20 to meet API specifications.
enquire nowWS Ben-Gel ( API Bentonite) is used as a viscosifying agent in water based mud systems. Sodium Bentonite expands when wet, absorbing many times its dry mass. Because of these colloidal properties, it is often used in drilling mud in the Oil and Gas Industry and in Environmental investigations. Another conventional use of bentonite is as a mud constituent for oil- and water- well drilling. Its role is mainly to seal the borehole walls, to remove drill cuttings and to lubricate the cutting head. It can also be used as a viscosifier and filtration control agent in all water based muds in oil drilling.
enquire nowWS CalCarb, commonly known as ground Limestone( Calcium Carbonate) is grinded in different sizes as per application.Calcium carbonate used to increase density of drilling and workover fluids as a weighting agent, to reduce fluid loss as a LCM, as a bridging agent for both water based and oil based fluid systems.
WS CalCarb is available in different grades
WS Hematite, commonly known as ground Iron Oxide. Hematite is the mineral form of Iron oxide, one of several Iron oxides. HEMATITE is a high-density weighting material. The hematite ore used as a weighting agent in drilling fluids. HEMATITE has a specific gravity of > 5, which is approx. 18% greater than the density of BARITE (4.2). Thus, for a given mud weight, a system weighted with HEMATITE will contain fewer solids by volume. A lower solids concentration will contribute to improved rheological properties, improved penetration rate and decreased overall mud costs.
enquire now