Pay in installments of $36.06 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 16 - Aug 21
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Dachträger BMW X4 5-Türig (F26 - integrierte Dachreling) (2014--2018) (2x) CRUZ Airo FuseKompletter Dachtrger CRUZ Airo Fuse fr BMW X4 5 Trig (F26 integrierte Dachreling) (2014 2018), inkusive Quertrger und Fsse. Schloss mit Schlssel sind optional bestellbar. (Link) Aerodynamische Aluminium Dachtrger mit integriertem Design. Die CRUZ Airo Fuse Dachtrger sind mit aerodynamischen Trgerprofilen ausgestattet, die perfekt mit Trgersttzfen integriert sind, und stilistisch mit den aktuellsten Fahrzeugmodellen harmonieren. Die geringe Hhe der
Kompletter Dachträger CRUZ Airo Fuse für BMW X4 5-Türig (F26 - integrierte Dachreling) (2014--2018), inkusive Querträger und Füsse.
Schloss mit Schlüssel sind optional bestellbar. (Link)
Aerodynamische Aluminium-Dachträger mit integriertem Design.Die CRUZ Airo Fuse Dachträger sind mit aerodynamischen Trägerprofilen ausgestattet, die perfekt mit Trägerstützfüßen integriert sind, und stilistisch mit den aktuellsten Fahrzeugmodellen harmonieren.
Die geringe Höhe der CRUZ Airo Fuse Trägerstützfüße, ermöglichen eine Reduzierung der Gesamthöhe des Systems.
Die CRUZ Airo Fuse Dachträger werden mit den CRUZ Kit Optiplus FIX montiert, die durch die Anwendung von Gummiadaptern den Spalt zwischen den Trägerkappen und dem Autodach perfekt verschließen - und somit auch eine klare ästhetische Verbesserung erzielen.
Konzipiert für Sicherheit, Effizienz und Ästhetik. Verbesserter Luftwiderstandsbeiwert. Reduzierte Fahrgeräusche. Weniger Kraftstoffverbrauch.
Die CRUZ Airo Fuse Dachträger sind durch die leichte Befestigung am Autodach, und die einfache Montage von vielseitigem Zubehör am oberem Trägerkanal hervorzuheben.
(1) im Vergleich zu allen anderen CRUZ Dachträgersystemen.
Die geringe Höhe der CRUZ Airo Fuse Trägerstützfüße, ermöglichen eine Reduzierung der Gesamthöhe des Systems.
Die CRUZ Airo Fuse Dachträger werden mit den CRUZ Kit Optiplus FIX montiert, die durch die Anwendung von Gummiadaptern den Spalt zwischen den Trägerkappen und dem Autodach perfekt verschließen - und somit auch eine klare ästhetische Verbesserung erzielen.
Konzipiert für Sicherheit, Effizienz und Ästhetik. Verbesserter Luftwiderstandsbeiwert. Reduzierte Fahrgeräusche. Weniger Kraftstoffverbrauch.
Die CRUZ Airo Fuse Dachträger sind durch die leichte Befestigung am Autodach, und die einfache Montage von vielseitigem Zubehör am oberem Trägerkanal hervorzuheben.
(1) im Vergleich zu allen anderen CRUZ Dachträgersystemen.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 25 reviews
Sort
Product Reviews
★★★★★ 5
Perfect hole placement
Size: 11 Holes
Worked exactly as described.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 24, 2025
★★★★★ 5
Good jig
Size: 11 Holes
The jig itself is great. The markings make it easy to be consistent; the design is well thought-out; and the build quality is good. I would recommend replacing the drill bit, though. A nice brad point will serve you better.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 5, 2025
★★★★★ 5
Great
Size: 11 Holes
Worked better than expected
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 10, 2026
★★★★★ 2
In the trash after a single use
Size: 11 Holes
For context, I’m a seasoned woodworker and always evaluate tools with the price in mind. This seemed like a good deal and in fact when it arrived, it looked and felt like reasonable quality for the price. Unhappily, the first bookshelf I drilled was off from side to side by almost 3 mm which would make a really wobbly shelf situation. It took a while to figure out what was happening, but I finally realized the metal bushings that guide the drill bit are so soft that they cored out from contact with the bit even though I was cautious to not put the bit in under power but to get it in the bushing and aligned before drilling. Still, the bushings started angling immediately. So when you then use those angled bushings to set the pin for the next series, it’s off by a little bit. Then the next is off by a little more…. By the time I drilled holes up and down a 6’ high shelf, the bushings were out of square, the holes were 3 mm out of alignment, and the shelf sides were firewood. Back to the drawing board and this goes in the trash, I’m afraid.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
★★★★★ 5
Finally, A Great Trackball for Macs
After reading the other Amazon reviews, I thought I would respond to some of the issues other reviewers raise from a Mac user's perspective. I run a new PowerBook 15" with OS X 10.3.2.
Unlike some other reviewers, I didn't notice any directional/orientation problems--the cursor follows the ball movement very well, even before installing the included Logitech software. Perhaps the necessary drivers are now universally available, or perhaps the Mac version is just better. Also, the "finger layout" has not proven to be an issue for me--I can use any or all of my fingers to control the ball without any cursor-direction problems.
The wireless function has proven flawless on my Mac. The reciever is a couple feet away and actually off the desk (no line of sight) and works fine. It was essentially plug-and-play on the Mac--I didn't even have to push the 'Connect' buttons to establish a signal, it just worked.
The software is necessary, however, to re-assign new functions to the several buttons on this model. As a former PC user, I can't go without a right-click button (one of the reasons I bought an external device for my notebook at all). The Mac software is very easy to use, and one can re-program all of the buttons and the wheel if one so desires. You can set a button to automatically double- or triple-click, or select keyboard shortcuts (e.g., Command and W to close the current window). Very easy, and quite useful--I use buttons to close windows, quit programs, delete files, and still have a handy web-browsing 'Back' button.
The only possible drawback to the Mac software is that one cannot "train" the ball's orientation (from what I can gather from other reviews, this option is not available on PC either). This really only matters if you know you hold trackballs at a different angle than most people do.
Please note that the software I'm reviewing is for Mac OS X only; the program for those running OS 8.6-9.2 is a different piece of software, which is also included in the package.
Those are all the Mac-specific comments I can think of at this point; if you're a Mac-user you're probably used to things "just working," and this device is no exception.
I'll also comment on some of the more universal issues raised by other reviews:
Ergonomically, there is a period of adjustment--anyone moving from a conventional mouse to any trackball or from one trackball to another should expect that. It's never a bad idea to try one out in-store to see how they feel, especially since trackball models vary from one to another much more than mice do.
This is not, as some have termed it, a 'disadvantage'--all new things take some time to get used to. If you've never used a trackball, it's weird for a while; it's also ergonomically superior/healthier in the long term.
Also, I use trackballs for computer drafting/design, and find superior control to mice--finger-control is just more precise than either thumb-controlled trackballs or wrist/arm-controlled mice.
The optical ball-tracking technology requires almost no cleaning, and there are zero moving parts to clean. Just pop the ball out and blow any collected lint out of the socket if necessary--which very rarely is.
For any pointing device that's wireless, optical, and has this many buttons, this price is pretty decent--lower, I think, than my previous trackball that was wired and lacked the wheel.
As for Logitech's reputation/reliability, I have had good experiences. My first trackball had to be replaced during the warranty period, but its replacement has lasted the four years since--I only replaced it now because it wasn't Mac-compatible. Now Mac-users can rejoice with a high-performance trackball that works seamlessly in OS X.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 11, 2004
recommand products
Makita DDF 485 RF1 Akku Bohrschrauber 18 V 50 Nm Brushless + 1x Akku 3,0 Ah + Ladegerät + 40 tlg. Bit Bohrer Set
187.98
Metabo SB 18 LT BL Akku Schlagbohrschrauber 18 V 75 Nm Brushless + 2x Akku 4,0 Ah + Ladegerät + metaBOX
171.59
Makita DHP 485 RF1 Akku Schlagbohrschrauber 18 V 50 Nm Brushless + 1x Akku 3,0 Ah + Ladegerät
179.40
HECO MULTI MONTI plus SS Schraubanker 10,0 x 60 mm 25 Stück ( 48399 ) Betonschraube, Sechskantkopf, verzinkt blau, A2K
24.65
HECO MULTI MONTI plus SS Schraubanker 12,0 x 80 mm 25 Stück ( 48407 ) Betonschraube, Sechskantkopf, verzinkt blau, A2K
29.60