SKU: 68932788051

Makita HR 012 GD101 Akku Kombihammer 40 V max. 3,3 J SDS plus Brushless + 1x Akku 2,5 Ah + Ladegerät + Makpac

$275.60 $306.22
Save 10%
No.2 Bestseller on watersyst.com >

Pay in installments of $76.56 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 17 - Aug 22

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Makita HR 012 GD101 Akku Kombihammer 40 V max. 3,3 J SDS plus Brushless + 1x Akku 2,5 Ah + Ladegerät + MakpacLieferumfang: 1x Makita HR 012 G Akku Kombihammer 1x Schnellwechselfutter 13 mm ( 191F46 4 ) 1x Bohrer Meielfett ( 198993 4 ) 1x Tiefenanschlag ( 331886 4 ) 1x Makita BL 4025 Akku 40 V 2,5 Ah XGT Li Ion Akku 1x Makita DC 40 RA 40 V Schnell Ladegert 1x Makita MAKPAC Koffer 1x Universaleinlage Produktbeschreibung: Makita HR 012 G Akku Kombihammer. Kompakter 40V max. Akku Kombihammer mit Werkzeugaufnahme passend fr SDS PLUS Einsteckwerkzeuge. Geeignet

Lieferumfang:

- 1x Makita HR 012 G Akku Kombihammer
- 1x Schnellwechselfutter 13 mm ( 191F46-4 )
- 1x Bohrer-/Meißelfett ( 198993-4 )
- 1x Tiefenanschlag ( 331886-4 )
- 1x Makita BL 4025 Akku 40 V 2,5 Ah XGT Li-Ion Akku
- 1x Makita DC 40 RA 40 V Schnell Ladegerät
- 1x Makita MAKPAC Koffer
- 1x Universaleinlage

Produktbeschreibung:

Makita HR 012 G Akku Kombihammer. Kompakter 40V max. Akku-Kombihammer mit Werkzeugaufnahme passend für SDS-PLUS-Einsteckwerkzeuge. Geeignet zum Bohren, Hammerbohren und Meißeln. Die Einzelschlagstärke beträgt 3,3 J, die max. Bohrleistung in Holz beträgt 32 mm, in Beton 28 mm. Mit AWS zur kabellosen Verbindung eines AWS-fähigen Staubsaugers. Zum Bohren, Hammerbohren und Meißeln. Mit SDS-PLUS-Werkzeugaufnahme und Schnellwechsel-Bohrfutter für zylindrische Bohrer. Mit Konstantelektronik für gleichbleibende Drehzahl auch unter Last. Mit Anti-Vibrations-Technologie AVT. AFT (Active Feedback sensing Technology) stoppt den Motor beim Blockieren des Werkzeugs. Das Auto-Start Wireless System (AWS) stellt über Bluetooth eine Verbindung zum Staubsauger her. Mit bürstenlosem Motor für geringen Stromverbrauch. XPT - Extreme Protection Technology. Optimaler Schutz gegen Staub und Spritzwasser auch unter harten Bedingungen.

Technische Daten:

Hersteller: Makita
Herstellerbezeichnung: HR 012 GZ01
Akkuspannung: 40 V
Bürstenloser Motor: Ja
Leerlaufdrehzahl: 0 - 1130 min-¹
(Leerlauf-)Schlagzahl: 0 - 5000 min-¹
Bohrleistung in Holz: 32 mm
Bohrleistung in Beton: 28 mm
Bohrleistung in Stahl: 13 mm
Idealer Bohrbereich (Beton): 6 - 20 mm
Einzelschlagstärke: 3,3 J
Bohrleistung Bohrkrone: 68 mm
Motorbremse: Ja
AWS-Schnittstelle: Ja
Schallleistungspegel (LWA): 104 dB(A)
Schalldruckpegel (LpA): 96 dB(A)
K-Wert Geräusch: 3 dB(A)
Gewicht inkl. Akku: 4,0 - 5,4 kg
Vibrationswerte, Meißeln: 6,9 m/s²
Vibrationsunsicherheitsfaktor (K-Wert), Meißeln: 1,5 m/s²
Vibrationswerte, Hammerbohren in Beton: 10,2 m/s²
Vibrationsunsicherheitsfaktor (K-Wert), Hammerbohren in Beton: 1,8 m/s²
Passend für SDS-PLUS: Ja

Bei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 68932788051

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 14 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Talagand
Lowell, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
C
Verified Purchase
Chris Stockbridge
Phoenix, US
★★★★★ 5
Worth the investment
Size: 1 Panel, Size: 1 Panel
I had to order this in an emergency. To put it in brief words, I live in a two level studio unit. My bedroom TV fell backwards off the bureau accidentally and down the stairs to its demise. Putting this together was no problem, instructions were thorough and easy. It came with several bars that connected together smoothly and an Allen key for the brackets and screws for the feet. I did one less horizontal bar on top and bottom so it could fit, which was great because with all of them on it was too long. However I ran into the difficulty of the horizontal bars popping out of the brackets during the last stages, but eventually got it done. I was also looking for a specific type of divider where I could adjust the feet so I could tuck it in between the dresser and banister. Glad I made this purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2026
I
Verified Purchase
Interloper
Massapequa, US
★★★★★ 1
You Get What You Pay For! A Piece Of Junk!
Size: 1 Panel
Flimsy and a piece of junk. Don’t waste your money. Assembly is a pain because it is so flimsy. Divider is thin. You can see right through it. Very wobbly.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 25, 2026
J
Verified Purchase
JAMES HAYES
Natrona Heights, US
★★★★★ 4
Instructions are useless
Size: 1 Panel
The instructions are poorly written and not very helpful. The divider itself is easy to assemble, and honestly, it would’ve been quicker if I had skipped the directions altogether. Once put together, though, it works as intended.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
P
Platinum Motif
Louisville, US
★★★★★ 5
This was the best
Size: 1 Panel
This divider is great for creating a little privacy or separating a small area without taking up much space. The fabric is thick enough to block visual clutter, and the frame is lightweight but stable once it’s opened. It folds flat for storage, which is convenient if you only need it occasionally. Assembly was straightforward, and it was the perfect size. It’s a practical piece for apartments, studios, or home offices where you want a quick, temporary partition.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026

recommand products

Blick auf eine alte, enge Straße in Rom, Italien
29.99
Bauernhaus bei Afers gegen Peitlerkofel, Aferer Geisler, Brixen, Dolomiten
30.00
Mohnblumenfeld mit Blick zur Windmühle Charlotte in der Geltinger Birk
42.00
Blumenwiese vor der Kirche St. Sixtus
30.00
Buchenwald an der Kreideküste im Nationalpark Jasmund, Insel Rügen
29.99