Klipsch DS-160CDT In-Ceiling Speaker (Each)Klipsch DS 160CDT In Ceiling Speaker (Each) at Vinyl Sound Toronto Canada The DS 160CDT is a 6. 5 inch two way in ceiling speaker from Klipsch (Indianapolis, Indiana, USA), available at Vinyl Sound in Toronto, Canada. Part of the Klipsch Designer Series, the DS 160CDT brings the same Tractrix horn technology used across Klipsch's premium Reference and architectural speaker lines into a streamlined, value driven in ceiling package. It delivers 91 dB

Klipsch DS-160CDT In-Ceiling Speaker (Each) at Vinyl Sound Toronto Canada

The DS-160CDT is a 6.5-inch two-way in-ceiling speaker from Klipsch (Indianapolis, Indiana, USA), available at Vinyl Sound in Toronto, Canada. Part of the Klipsch Designer Series, the DS-160CDT brings the same Tractrix® horn technology used across Klipsch's premium Reference and architectural speaker lines into a streamlined, value-driven in-ceiling package. It delivers 91 dB sensitivity, a frequency range of 77 Hz to 20 kHz, and a 100-degree coverage angle, paired with the patented SkyHook tool-free installation system that reduces install time by up to 75 percent compared to conventional dog-leg mounting methods.

Horn-Loaded Performance with Tractrix® Technology

The DS-160CDT is built around Klipsch's proprietary Tractrix® horn, a geometrically optimized waveguide that loads the 1-inch Pivot Silk Dome tweeter for greater efficiency, reduced distortion, and controlled high-frequency dispersion. Unlike standard in-ceiling speakers that use a bare dome tweeter firing directly into the room, the Tractrix® horn focuses the tweeter's output into a consistent 100-degree pattern, delivering more acoustic energy on-axis and reducing the reflected energy that causes smearing of fine sonic detail. This horn-loaded approach is the same principle Klipsch has applied since 1946 across its Heritage Series, Reference Premiere, and professional cinema speaker systems, making the DS-160CDT a genuine inheritor of that engineering tradition at an accessible price point.

Controlled Dispersion Technology and Pivoting Tweeter

The DS-160CDT carries the CDT designation, which identifies Klipsch's Controlled Dispersion Technology. A patent-pending gimbal mechanism allows both the tweeter and the 6.5-inch woofer to be aimed up to 15 degrees in any direction from center, providing on-axis frequency response at almost any listening position regardless of where the speaker is physically mounted in the ceiling. This is particularly valuable in open-plan living spaces, kitchens, and hallways where ceiling joists and structural elements force mounting positions that are not directly above the primary seating area. The pivoting 1-inch Silk Dome tweeter independently swivels to direct high-frequency output with precision, while the woofer tilt ensures that midbass energy follows suit.

Patented SkyHook Tool-Free Installation System

The DS-160CDT uses Klipsch's Sky Hook Cinch by Swarm installation system, a patented tool-free mechanism that engages the dog legs automatically when the speaker body is inserted into the 8.3-inch cutout hole. The dog legs lock at a factory-preset clamping force, eliminating the risk of overtorquing and ceiling damage that can occur with manually tightened installation systems. For ceilings that are not perfectly level, a quarter-turn adjustment of each dog leg screw achieves a flush finish without additional tools. The total mounting depth is 4.34 inches, and the overall speaker diameter is 9.2 inches. An optional fire-rated enclosure (ME-650-C) and installation kit (IK-650-C II) are available separately for code-compliant builds and professional custom installations.

Key Features

• 6.5-Inch Polypropylene Woofer: A lightweight, stiff polymer cone delivers clean bass and midrange response down to 77 Hz, covering the full range of vocals, acoustic instruments, and midbass content with minimal coloration.
• 1-Inch Pivot Silk Dome Tweeter with Tractrix® Horn: The silk dome provides smooth, detailed treble reproduction while the Tractrix® horn increases efficiency and controls the 100-degree dispersion pattern for precise, focused high-frequency delivery.
• Controlled Dispersion Technology (CDT): Both the tweeter and woofer can be independently aimed up to 15 degrees in any direction, enabling on-axis frequency response from off-center mounting positions that would compromise a fixed-driver design.
• Patented SkyHook Tool-Free Installation: The Cinch by Swarm mechanism auto-engages at a preset clamping force when inserted into the cutout, eliminating overtorquing and reducing installation time by up to 75 percent.
• Bezel-Free Magnetic Grille: A powder-coated magnetic steel grille attaches flush to the ceiling with no visible bezel ring, creating a discreet, seamless appearance. The grille is paintable to match any ceiling color.
• 91 dB Sensitivity: High efficiency allows the DS-160CDT to produce substantial output from modest amplifier power, making it well-suited to multi-zone distributed audio systems and whole-house audio installations.
• 50W RMS / 200W Peak Power Handling: Compatible with a wide range of residential amplifiers, AV receivers, and multi-zone distribution systems.
• 8-Ohm Compatible Impedance: Standard impedance for straightforward integration with any residential amplification without special wiring calculations.

Technical Specifications

Frequently Asked Questions

What is the Klipsch DS-160CDT?

The Klipsch DS-160CDT is a 6.5-inch two-way in-ceiling speaker from the Klipsch Designer Series, built around a 1-inch Silk Dome tweeter mated to a Tractrix® horn and a 6.5-inch Polypropylene woofer. It delivers 91 dB sensitivity, handles up to 50W RMS, and covers a frequency range of 77 Hz to 20 kHz. Both the tweeter and woofer can be aimed up to 15 degrees via Klipsch's Controlled Dispersion Technology, making it suited for distributed audio, home theater surround sound, and two-channel stereo listening in standard and challenging ceiling positions alike.

How does the Klipsch DS-160CDT compare to the DS-180CDT?

The DS-160CDT and the Klipsch DS-180CDT share the same Designer Series platform, SkyHook installation system, Tractrix® horn tweeter, and CDT aiming capability, but they differ in woofer size and low-frequency extension. The DS-180CDT uses an 8-inch Polypropylene woofer and reaches down to 55 Hz, while the DS-160CDT uses a 6.5-inch woofer with a bass limit of 77 Hz. The DS-180CDT also delivers slightly higher sensitivity at 94 dB versus 91 dB. For larger rooms or installations where deeper bass extension is needed without a dedicated subwoofer, the DS-180CDT is the stronger choice. The DS-160CDT is better suited to smaller and medium rooms, hallways, kitchens, and multi-zone whole-house audio where a more compact form factor is preferred.

Can the Klipsch DS-160CDT be used in a home theater surround system?

Yes, the DS-160CDT is well suited for in-ceiling surround sound use in a home theater setup. Its 100-degree coverage angle and CDT aiming capability allow the tweeter and woofer to be directed toward the primary seating area, ensuring surround channel content arrives on-axis rather than from a diffuse off-axis position. When paired with a dedicated subwoofer for low-frequency effects, the DS-160CDT handles dialogue, ambient sound, and mid-to-high frequency surround content with the dynamic performance and efficiency that characterize Klipsch's horn-loaded designs.

What is Controlled Dispersion Technology on the DS-160CDT?

Controlled Dispersion Technology, or CDT, is a Klipsch-engineered gimbal mechanism that allows both the tweeter and the woofer of the DS-160CDT to be independently aimed up to 15 degrees off the speaker's central axis in any direction. This means the installer can physically angle the drivers toward a seating area during installation, delivering on-axis frequency response even when the speaker's ceiling position is not directly above the listener. It is especially valuable in rooms where mounting positions are dictated by ceiling joists, wiring runs, or architectural constraints rather than acoustic ideals.

How does the SkyHook installation system work on the DS-160CDT?

The SkyHook system uses a patented Cinch by Swarm mechanism in which the speaker's internal dog legs engage automatically when the speaker body is pushed into the ceiling cutout hole. The dog legs lock at a factory-preset clamping force, so there is no risk of overtorquing the mounting hardware and damaging the ceiling material. If the ceiling surface is uneven, a quarter-turn of each dog leg screw provides additional adjustment for a flush, level finish. The result is a secure, professional-looking mount without screwdrivers or other tools, and installation time is reduced by up to 75 percent compared to traditional manual dog-leg systems.

Where can I buy the Klipsch DS-160CDT in Toronto or Canada?

The Klipsch DS-160CDT is available at Vinyl Sound, an authorised Klipsch dealer located in Toronto, Canada. Vinyl Sound carries the full Klipsch Designer Series and custom installation lineup, and the team can assist with speaker placement planning, compatible amplification recommendations, and guidance on optional accessories including the IK-650-C II installation kit and ME-650-C fire-rated enclosure for code-compliant builds across the Greater Toronto Area and beyond.

Is the Klipsch DS-160CDT sold individually or as a pair?

The DS-160CDT is sold individually as a single speaker unit. Customers building a stereo listening zone should purchase two units. For whole-house multi-room audio or home theater installations with multiple ceiling speaker positions, the quantity required depends on the layout and number of zones in the system design.

Does the Klipsch DS-160CDT need a back box or fire-rated enclosure?

The DS-160CDT operates as an infinite baffle design and does not require a back box for standard residential drywall ceiling installations. However, the optional ME-650-C fire-rated enclosure is available separately for projects where local building codes require fire separation between floors or rooms. The optional IK-650-C II installation kit, which includes a mud ring, breakaway wire tie, and color-coded mounting brackets, is also available separately for professional and code-compliant custom integration work.