SKU: 28244454271

PRO-TECH OGEE BIT 1 1/2' X 11/16' RADIUS 1/4' 1/4' SHANK KP309021

Sale price$237.83 Regular price$264.26
Save 10%

Pay in installments of $66.06 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 8 - Aug 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

PRO-TECH OGEE BIT 1 1/2' X 11/16' RADIUS 1/4' 1/4' SHANK KP309021Edge profile router bits Ogee profile Carbide Tipped The ogee profile router bit is designed for creating decorative mouldings or edge profiles. These cutters allow you to shape a convex and a concave profile in one pass. By replacing the guide bearing with a smaller diameter bearing will also allow a fillet (bead) at the bottom of the profile. This router bit has a 6. 35 mm shank (shaft) that will fit most small or large routers. Please ensure that

Edge profile router bits
Ogee profile

Carbide Tipped

The ogee profile router bit is designed for creating decorative mouldings or edge profiles. These cutters allow you to shape a convex and a concave profile in one pass. 

By replacing the guide bearing with a smaller diameter bearing will also allow a fillet (bead) at the bottom of the profile.

 

This router bit has a 6.35 mm shank (shaft) that will fit most small or large routers. Please ensure that you select a router bit with a shank (shaft) size that will fit into your router collet.

PRO-TECH router bits are manufactured in Taiwan.

 

consider safety for your health and the people around you

General safety suggestions:

It is advisable to always have the following items nearby and in a good condition

  • Eye protection clean and scratch free
  • Hearing protection quality earmuffs
  • Dust masks discard old and dirty masks
  • Gloves for easy handling of material and hand protection
Wear Gloves
Eye Protection
Hearing Protection
Dust Mask

To use router bits safely (and to get the best results from your router), the router bits need to be installed properly into the router's collet. Improper installation of your bits can cause excessive chatter and could increase the likelihood that the bits will break when in use. 

Clean and sharp

First of all, before beginning any routing operation, check your bits to make sure that they are clean, relatively free of pitch, and most of all, sharp. If the bit is dull, chipped, is excessively burned or has any other defect, it should be sharpened or replaced before use. 

Correct collet and collet nut fit

Most router collets have a recess (groove) that needs to click into a circlip that resides inside the collet nut. Failing to ensure that the collet 'clicked' into the collet nut will cause you to struggle to remove the router bit after tightening. This could cause the collet to break or be removed by a technical repair centre.

 

Correct fit inside the collet

When installing the bit into the collet, do not tighten the collet with the bit 'seated.' Instead, insert the bit until the shank (bit shaft) reaches the bottom of the collet, then ease it out about 2 mm before tightening the collet.

When the bit is tightened, there should be no less than  2/3 's of the length of the shank in the collet. If your bit has a shank that is too short, then the bit should be replaced. 

 

Safety gear

There are a few other safety measures to keep in mind whenever you use your router. First of all, remember to always wear appropriate safety gear as indicated above.

Correct speed setting

Second, be sure to set your router to the proper speed for your router bit. Setting your router to an incorrect speed will not only affect the router's performance, but also can cause the bit to break much more easily and even cause bodily harm. The speed at which a router bit turns can be important. The typical router runs at about 22,000 rpm, which is fine for most bits. But as the diameter of the bit increases, you ll want to slow things down.

Also, before beginning any routing operation, be certain that you give the router's motor time to come up to full speed for the chosen setting. Beginning to cut before the bit is at full speed can give less than desired results. 

Observe the following at all times

  • Wear a protective face shield or Safety Glasses to prevent eye and face injury.
  • Wear ear plugs or ear muffs to protect your hearing.
  • Use a respirator or dust mask to give protection from dust particles. Wood dust may remain in the air for hours after using power tools.
  • Always read and follow router operator's manual instructions.
  • Make sure that router rpm's and the bit selected match.
  • Dress properly. Wear short sleeves, no loose fitting clothes, proper footwear and no jewellery. Tie back long hair.
  • Always be sure the router is unplugged before replacing bits and that the switch is off before connecting the router.
  • Be sure the router bit has completing stopped spinning before sitting the router down.
  • Be sure bits, clamps and attachments are secure before starting up.
  • Keep children, pets and visitors at a safe distance.
  • Be especially cautious when working small pieces.
  • Keep hands and fingers away from revolving bits and cutters.
  • Do not operate routers in moist or wet areas.
  • Always grip tool tightly and be prepared at start-up to resist the motor torque.
  • When using a router table, make sure on/off switch is easily accessible.
  • Learn the sound of your router and shut it off at any unfamiliar sounds or irregularities.
    Never start the router with the bit in contact with the material.
  • Always feed in the proper direction, against the direction of bit rotation.
  • Maintain equipment. Replace worn parts, discard worn-out bits and check router periodically. Clean parts with appropriate solvents.
  • Don't operate a tool if you are tired or under the influence of medication, drugs, alcohol or while smoking.
  • Check wood for nails, screws or loose knots before routing.
  • Keep your mind on your work, avoid distractions, work at a comfortable pace and stop before you get tired.

Do a dry run

  • Place the router on the final work surface and test you cut by moving the router over the whole are to cut with THE ROUTER SWITCHED OFF
  • You do not want to waste an expensive piece of wood
  • You do not want to start all over
  • Never met anyone with spare fingers - SAFETY
Part No. Shank dia. Cutting width Cutting Height Radius (r)
KP309021 1/4 inch 1 1/2 inch 11/16 inch 1/4 inch
6.35 mm 38.1 mm 17.46 mm 6.35 mm

 

Length of Shank: 32 mm
Replacement bearing part number: KP100 1-2

 

 



KP309021Router Bits > Profiles > Ogee
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 28244454271

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 19 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
michele schmitz
Dallas, US
★★★★★ 3
Very thin. You get what you pay for.
Color: 01 - White, Size: Queen
You get what you pay for. I first noticed the softness which was great. The quality is very thin. They are cool which is great. I have not washed them yet. I would suggest washing them on cool and gentle by themselves. And because they are so thin I would fluff dry for an hour if you have that setting. The two things that damages clothes and sheets, etc. are if you have an agitator in your washer, those ruin clothes and the heat you choose for the fabric you’re drying I always wash my clothes on cold. I do not have an agitator anymore and on delicate and thin fabrics, I use fluff dry. It is cool, but it will dry, especially if it is thin and I’ve had to dry my fine delicates a little bit longer on fluff that way they don’t shrink because the shrinking comes in from the heat from the dryer so keep that in mind another good thing to remember if you got white sheets like I did is that when you use your detergent add a little bit of borax or laundry booster and they will help get them clean and sparkly white. I am on the fence about whether I would recommend this or not if you’re tight on money and you take good care of them I would recommend that you get them. I’m a linen freak and I buy mostly expensive sheets and I thought I would try this out so that’s where I’m at.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
C
Verified Purchase
Chris
West Palm Beach, US
★★★★★ 5
BEAUTIFUL.
Size: 1-Pack, Style: Zinnia Dahlia
Great seeds, good germination.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2026
B
Verified Purchase
Brandi Lynn N
Houston, US
★★★★★ 5
Excellent Dahlia Seeds — Huge Difference in Quality
Size: 1-Pack, Style: Zinnia Dahlia, Size: 1-Pack, Style: Zinnia Dahlia
Excellent germination rate and very fast growth! I planted these seeds side-by-side with another Dahlia seed packet from a different seller on the exact same day under identical conditions, and the difference has been amazing. By day 23, these seedlings were already thriving — healthy, vibrant, and growing quickly with a very high germination rate. The plants look strong and vigorous, and I’m extremely impressed with the quality of the seeds. If you’re looking for Dahlia seeds that actually perform well and establish quickly, I would absolutely recommend these. I’m excited to see them continue growing and blooming
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
L
Verified Purchase
Lillian DuBois
Chelsea, US
★★★★★ 5
Zinnia flower seeds are great
Size: 1-Pack, Style: Zinnia Dahlia
I love the seeds there sprouting so well we got some for me and my daughter to try out and we love them. We will be buying more seeds soon or we would love to test seeds out if you ever decide to choose us.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026
A
Verified Purchase
Amazon Customer
West Palm Beach, US
★★★★★ 5
customer
Size: 1-Pack, Style: Zinnia Dahlia
This package had more than the pkg that was supposed to have 4000, but they are coming up slowly. It is dry here, I have been watering , just enough to get the ground wet and they are scattered, but some are coming up. I also watered the space supposedly where i spread seeds from the supposedly 4000 seeds pkg. They are not coming up as much!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026

recommand products