SVS Sound PB-2000 Pro SubwooferSVS Sound PB 2000 Pro Subwoofer at Vinyl Sound Toronto Canada The PB 2000 Pro is a ported reference subwoofer from SVS (Youngstown, Ohio, USA), available at Vinyl Sound in Toronto, Canada. Built on technology derived from the flagship SVS 16 Ultra Series and the award winning 4000 and 3000 Series, this ported powerhouse features an all new 12 inch high excursion SVS driver, a Sledge STA 550D Class D MOSFET amplifier rated at 550 watts RMS and 1,500+

SVS Sound PB-2000 Pro Subwoofer at Vinyl Sound Toronto Canada

The PB-2000 Pro is a ported reference subwoofer from SVS (Youngstown, Ohio, USA), available at Vinyl Sound in Toronto, Canada. Built on technology derived from the flagship SVS 16-Ultra Series and the award-winning 4000 and 3000 Series, this ported powerhouse features an all-new 12-inch high-excursion SVS driver, a Sledge STA-550D Class D MOSFET amplifier rated at 550 watts RMS and 1,500+ watts peak, and bass extension reaching 16 Hz in standard ported mode. Controlled by a 50 MHz Analog Devices DSP with 56-bit precision filtering and managed via the SVS Subwoofer Smartphone App, the PB-2000 Pro delivers subterranean low-frequency output with astonishing detail, accuracy, and musicality that outperforms much larger and more expensive subwoofers.

All-New 12-Inch High-Excursion Driver: Deep Bass with Subtlety and Finesse

The PB-2000 Pro is built around a completely redesigned 12-inch SVS driver engineered specifically for the 2000 Pro platform. A lightweight aluminum vented cone with a composite fiber dustcap maintains an exceptional stiffness-to-mass ratio, enabling room-energizing SPLs while preserving pistonic accuracy at the highest drive levels. The dual ferrite magnet motor assembly, weighing over 15 lbs, generates the magnetic force required for deep excursion without dynamic compression, allowing effortless extension below 20 Hz with vanishingly low distortion. A long-throw parabolic surround produced via proprietary injection molding enables extreme driver excursion while preserving drive unit longevity, and a dual-layer voice coil design maximizes linearity at full excursion to minimize both distortion and power compression. An aluminum pole piece extension completes the package with optimized thermal management for sustained reference-level output.

Sledge STA-550D Amplifier, 50 MHz DSP, and Variable Port Tuning

The Sledge STA-550D amplifier combines the efficiency of Class D topology with fully discrete MOSFET output stages, delivering massive current reserves with the precision needed to drive the 12-inch driver to its absolute limits. Paired with this amplifier is the 50 MHz Analog Devices Audio DSP, featuring 56-bit filtering and frequency response curves optimized specifically for the PB-2000 Pro cabinet, which enables it to pressurize rooms of any size with tight, heart-pounding bass. A standout feature of the ported PB-2000 Pro is its Variable Port Tuning Modes: Standard mode achieves the full 16 Hz extension for maximum cinematic output, while Sealed mode, engaged by inserting the included port plugs, raises the floor to 17 Hz for improved transient speed and musical accuracy. This flexibility makes the PB-2000 Pro a versatile choice for listeners who use a single subwoofer across both home theater and two-channel listening, placing it well ahead of single-mode competitors such as the Polk Audio HTS 12, the Yamaha NS-SW300, and the JBL Stage A120P at this price tier.

SVS Subwoofer Smartphone App and Acoustically Inert Ported Cabinet

The SVS Subwoofer Smartphone App connects via Bluetooth and is compatible with Apple iOS, Google Android, and Amazon Fire devices. From any listening position, the app provides access to volume, low-pass filter frequency and slope, phase, polarity, room gain compensation, port tuning mode, and a three-band parametric equalizer with frequency adjustment down to the individual hertz. Three custom presets can be saved for one-touch recall across music, movie, and night listening modes, while bidirectional feedback displays adjustments in real time on both the app and the rear-panel Intelligent Control Interface. The MDF cabinet features an extra-thick front baffle with extensive internal bracing and acoustic insulation to eliminate resonance at all drive levels. Dual front-firing ports under the driver, custom iso-elastomer feet, and a non-resonant ABS grille with fabric mesh complete a build that punches well above its class in both engineering and fit and finish.

Key Features

• 12-Inch High-Excursion SVS Driver: Fully redesigned driver with aluminum vented cone, dual ferrite magnet motor over 15 lbs, long-throw parabolic surround, and dual-layer voice coil for deep, accurate, low-distortion bass output.
• Sledge STA-550D Class D MOSFET Amplifier: Rated at 550 watts RMS and 1,500+ watts peak with fully discrete MOSFET output for massive current delivery and precise dynamic control at all drive levels.
• 16 Hz Bass Extension in Standard Mode: Frequency response of 16 Hz to 290 Hz ±3 dB in standard ported mode, with 17 Hz to 290 Hz ±3 dB in sealed mode using the included port plugs.
• 50 MHz Analog Devices Audio DSP with 56-Bit Filtering: Precision digital signal processing with frequency curves tuned specifically for the PB-2000 Pro, maintaining accuracy and control at all drive levels.
• Variable Port Tuning Modes: Switch between Standard (ported, maximum extension to 16 Hz) and Sealed (plugged ports, tighter transient response at 17 Hz) to optimize performance for movies or music.
• SVS Subwoofer Smartphone App: Bluetooth control via iOS, Android, and Amazon Fire with three-band parametric EQ, room gain compensation, port tuning, phase, and three custom memory presets.
• Rear-Panel Intelligent Control Interface (ICI): Touch-button panel with LED bar indicator provides direct access to volume, phase, and low-pass filter settings without requiring the app.
• Stereo RCA Inputs and Outputs: Includes LFE-labeled right-channel input and stereo pass-through output for flexible two-channel and home theater integration.
• USB Port for SoundPath Wireless Adapter: Powers the optional SVS SoundPath Tri-Band Wireless Audio Adapter for cable-free subwoofer placement anywhere in the room.
• Acoustically Inert MDF Cabinet: Extra-thick front baffle with extensive internal bracing, acoustic insulation, and iso-elastomer feet to eliminate resonance and floor noise transfer at reference levels.

Technical Specifications

Connections at a Glance

• RCA stereo line input (L/R, LFE-labeled right channel)
• RCA stereo line output (for signal pass-through)
• 12V trigger input (3.5 mm)
• USB Type-A (for SoundPath Wireless Audio Adapter, sold separately)
• IEC AC power inlet with detachable power cord
• Rear-panel Intelligent Control Interface (ICI) with LED bar display
• Two front-firing ports with included port plugs for sealed mode operation

Awards and Critical Recognition

• AVForums Editor's Choice Award, Best Home Cinema Subwoofer, 2021

Frequently Asked Questions

What is the SVS PB-2000 Pro?

The SVS PB-2000 Pro is a ported 12-inch subwoofer with bass extension to 16 Hz, powered by a 550-watt RMS Sledge STA-550D Class D MOSFET amplifier and controlled by a 50 MHz Analog Devices DSP with 56-bit filtering. It is part of SVS's 2000 Pro Series, a complete redesign of the brand's most popular subwoofer line incorporating technology trickled down from the flagship SVS 16-Ultra Series. The PB-2000 Pro won the AVForums Editor's Choice Award for Best Home Cinema Subwoofer in 2021 and is available in Toronto, Canada at Vinyl Sound.

How does the SVS PB-2000 Pro compare to the Polk Audio HTS 12 and the Yamaha NS-SW300?

The SVS PB-2000 Pro outperforms both competitors in extension, amplification, and DSP control. The Polk Audio HTS 12 uses a 200-watt amp and lacks a smartphone control app, while the Yamaha NS-SW300 offers 130 watts with a basic auto-calibration feature but no parametric EQ. The PB-2000 Pro counters with 550 watts RMS, 1,500+ watts peak, a 50 MHz Analog Devices DSP, and a full three-band parametric EQ accessible from any seat via Bluetooth app. Its 16 Hz extension in standard mode is also meaningfully deeper than the typical 28 to 30 Hz floor of competing subwoofers in its size class, giving it a decisive advantage for home theater LFE and bass-intensive music listening.

Can the SVS PB-2000 Pro be used as a sealed subwoofer?

Yes, the PB-2000 Pro includes port plugs that convert it from a ported to a sealed cabinet, engaging a separate DSP tuning mode optimized for sealed operation. In sealed mode, the frequency response shifts to 17 Hz to 290 Hz at plus or minus 3 dB, and the character of the bass becomes tighter and more musically articulate. This dual-mode flexibility makes the PB-2000 Pro suitable for both dedicated home theater use in standard ported mode and more music-oriented listening in sealed mode, without any loss of performance in either configuration.

What is the Variable Port Tuning mode on the PB-2000 Pro?

Variable Port Tuning is a feature that allows the PB-2000 Pro to operate in two distinct acoustic configurations. Standard mode keeps both front-firing ports open for maximum low-frequency extension and room-pressurizing output, with bass reaching down to 16 Hz. Sealed mode uses the included foam port plugs to block both ports, resulting in a tighter, faster bass character suited to music listening, while maintaining 17 Hz extension. Both modes have dedicated DSP frequency response curves tuned specifically for each configuration, ensuring optimized performance in whichever operating mode is selected.

How does the SVS Subwoofer App work with the PB-2000 Pro?

The SVS Subwoofer App connects to the PB-2000 Pro via Bluetooth and is compatible with Apple iOS, Google Android, and Amazon Fire platforms. It provides full control of volume, low-pass filter frequency and slope, phase, polarity, room gain compensation, port tuning mode, and a three-band parametric equalizer with per-Hz frequency precision. Three custom presets can be programmed and recalled with a single tap, allowing instant switching between optimized settings for movies, music, and late-night listening. Bidirectional feedback displays all changes in real time on both the app and the rear-panel Intelligent Control Interface.

Is the SVS PB-2000 Pro suitable for two-channel music systems?

Yes, the PB-2000 Pro integrates effectively into stereo two-channel systems. It includes stereo RCA inputs and a stereo RCA output for pass-through connectivity, and its sealed mode option delivers the tight, musical bass character preferred by audiophile listeners. The three-band parametric EQ in the SVS app allows precise blending with any floorstander or bookshelf speaker, and the room gain compensation feature helps manage low-end buildup in smaller listening rooms. For buyers pairing the PB-2000 Pro with bookshelf monitors from brands such as KEF, Bowers and Wilkins, or Monitor Audio, it provides a strong low-frequency foundation without imposing a home theater character on the system.

Where can I buy the SVS PB-2000 Pro in Toronto or Canada?

The SVS PB-2000 Pro is available at Vinyl Sound, an authorized SVS dealer located in Toronto, Canada. Vinyl Sound carries the full SVS subwoofer lineup and can provide expert guidance on subwoofer selection, room integration, and pairing with your existing speakers and AV receiver or stereo amplifier. Contact Vinyl Sound Toronto to confirm current stock availability and to arrange a demonstration.