Dali EPIKORE 3 Floorstanding Loudspeakers (Pair)DALI EPIKORE 3 Stand Mount Speakers at Vinyl Sound Toronto Canada The DALI EPIKORE 3 is a 3 way stand mount loudspeaker from DALI (Skive, Denmark), available at Vinyl Sound in Toronto, Canada. Bringing DALI KORE and EPICON technology directly into a compact bookshelf format, the EPIKORE 3 combines a 7 inch SMC Gen 2 Clarity Cone bass and midrange driver with the EVO K Hybrid Tweeter featuring a 35mm soft dome and 10 x 55mm planar magnetostatic ribbon

DALI EPIKORE 3 Stand-Mount Speakers at Vinyl Sound Toronto Canada

The DALI EPIKORE 3 is a 3-way stand-mount loudspeaker from DALI (Skive, Denmark), available at Vinyl Sound in Toronto, Canada. Bringing DALI KORE and EPICON technology directly into a compact bookshelf format, the EPIKORE 3 combines a 7-inch SMC Gen-2 Clarity Cone bass and midrange driver with the EVO-K Hybrid Tweeter featuring a 35mm soft dome and 10 x 55mm planar magnetostatic ribbon element, in a 3-way crossover configuration at 2,800Hz and 12,500Hz. With a frequency range of 42Hz to 34kHz (+/-3dB), maximum SPL of 108dB, and 85dB sensitivity at 6-ohm nominal impedance, the EPIKORE 3 is housed in a curved real-wood veneer cabinet with piano-finish lacquering in three exclusive high-gloss finishes, built by DALI in Denmark, with the optional EPIKORE Stand available separately for optimal placement.

KORE Technology in a Stand-Mount Format: EVO-K Hybrid Tweeter and SMC Gen-2

The EPIKORE 3 is the most compact expression of the technology lineage that begins with the flagship DALI KORE and runs through the EPIKORE 7, 9, and 11 floorstanders. The EVO-K Hybrid Tweeter, developed exclusively for the KORE, is present in its full form: a 35mm in-house-developed soft dome tweeter paired with a 10 x 55mm planar magnetostatic ribbon element driven by neodymium magnet motor systems, covering 2,800Hz through 34kHz with the smooth, effortless dynamics and wide horizontal dispersion that define the EVO-K's sonic character at any volume level. The 7-inch bass and midrange driver is newly designed specifically for the EPIKORE 3, equipped with an exceptionally large and powerful magnet system featuring SMC Gen-2 Soft Magnetic Compound technology that eliminates eddy current losses and non-linear magnetic distortion from the motor circuit. DALI's Clarity Cone Technology paper and wood fibre diaphragm further dampens unwanted resonances throughout the driver's operating range, delivering astonishing low-loss, low-distortion reproduction from a single driver handling the full bass and midrange bandwidth below 2,800Hz.

Continuous-Flare Bass Reflex Port and 42Hz Extension

The EPIKORE 3's bass reflex enclosure uses a continuous-flare port geometry that progressively widens from throat to mouth, minimizing air velocity and turbulence at the port exit to reduce port noise and dynamic compression during demanding bass passages. The reflex system is tuned to 39Hz, supporting the EPIKORE 3's 42Hz lower frequency limit, a genuinely extended bass reach for a stand-mount loudspeaker of its cabinet volume, achieved through the combination of the 7-inch woofer's large effective radiating area and the continuous-flare port's efficient low-turbulence air discharge. DALI recommends positioning the EPIKORE 3 between 35cm and 120cm from the rear wall, on a dedicated stand or shelf, for optimal bass integration and stereo imaging. The optional EPIKORE Stand is specifically engineered for the EPIKORE 3 and is strongly recommended for listeners seeking maximum acoustic performance from the speaker.

EPIKORE Stand: Extruded Aluminium with Integrated Cable Routing

The optional EPIKORE Stand is an exceptionally rigid extruded aluminium stand designed exclusively as the acoustic and mechanical foundation for the EPIKORE 3. It features a generously dimensioned machined top plate that mates precisely with the EPIKORE 3's cabinet base, integrated floor spikes with outriggers for a wide, stable footprint on carpeted or hard flooring, internal cable routing that eliminates external speaker cable runs between stand and speaker, and a sand-fill option that increases stand mass for improved vibration damping and mechanical stability. As a purpose-built system accessory rather than a universal stand, the EPIKORE Stand extracts the full acoustic potential of the EPIKORE 3 in a way that generic stands cannot match.

Key Features

• EVO-K Hybrid Tweeter from the DALI KORE: In-house-developed 35mm soft dome tweeter combined with a 10 x 55mm planar magnetostatic ribbon element and neodymium magnet motors, delivering smooth, effortless high-frequency reproduction from 2,800Hz to 34kHz with wide horizontal dispersion at any volume.
• 7-Inch SMC Gen-2 Clarity Cone Bass and Midrange Driver: Newly designed specifically for the EPIKORE 3, with an exceptionally large SMC Gen-2 magnet system and Clarity Cone Technology paper and wood fibre diaphragm for ultra-low-loss, ultra-low-distortion reproduction across the full bass and midrange bandwidth.
• 3-Way Crossover at 2,800Hz and 12,500Hz: Two crossover points divide the frequency range into three fully specialized driver sections, minimizing intermodulation distortion between the bass and midrange driver, soft dome tweeter, and ribbon super-tweeter.
• Continuous-Flare Bass Reflex Port Tuned to 39Hz: Progressive port geometry eliminates air turbulence and compression for cleaner, deeper, and more accurate bass reproduction supporting the EPIKORE 3's 42Hz lower frequency limit from a stand-mount cabinet.
• 42Hz-34kHz Frequency Range: Exceptional frequency extension for a stand-mount loudspeaker, from genuine bass authority through the ribbon super-tweeter's 34kHz ceiling, capturing the complete harmonic spectrum of any musical source.
• 108dB Maximum SPL: High dynamic headroom for a stand-mount speaker, capable of realistic reproduction of demanding orchestral and large-scale recordings at high listening levels.
• 6-Ohm Nominal Impedance: Amplifier-friendly load compatible with a broad range of premium integrated and separates amplifiers delivering between 40W and 250W.
• Curved Real-Wood Veneer Cabinet: Completely inert curved enclosure with real-wood veneer and piano-finish lacquering in three exclusive high-gloss finishes, built by DALI in Denmark.
• Optional EPIKORE Stand: Purpose-built extruded aluminium stand with machined top plate, integrated floor spikes and outriggers, internal cable routing, and sand-fill option, engineered specifically to extract the EPIKORE 3's full acoustic potential.
• Bi-Wire Capable: Dual binding terminal configuration supports separate cable runs to the high-frequency and low-frequency sections for reduced inter-driver cable interaction.
• DALI Heritage: Natural evolution of the DALI EPICON range with direct KORE technology inheritance, built in Denmark with 40 years of loudspeaker engineering expertise.

Technical Specifications

Frequently Asked Questions

What is the DALI EPIKORE 3?

The DALI EPIKORE 3 is a 3-way stand-mount loudspeaker built by DALI in Denmark, featuring a 7-inch SMC Gen-2 Clarity Cone bass and midrange driver and the EVO-K Hybrid Tweeter with 35mm soft dome and 10 x 55mm planar magnetostatic ribbon, in a curved real-wood veneer piano-lacquer cabinet. It covers 42Hz to 34kHz with 85dB sensitivity, 6-ohm nominal impedance, and 108dB maximum SPL, weighing 22kg per speaker. The EPIKORE 3 is available at Vinyl Sound in Toronto, Canada, with the optional EPIKORE Stand available separately.

How does the DALI EPIKORE 3 compare to the EPIKORE 7 and the Harbeth M30.2 XD?

The DALI EPIKORE 3 shares the EVO-K Hybrid Tweeter and SMC Gen-2 Clarity Cone driver technology directly with the EPIKORE 7 floorstander, making it the only stand-mount speaker in the EPIKORE range to carry the full KORE technology package in a compact format. The EPIKORE 7 adds a second 7-inch driver in a 3.5-way configuration, extending to 35Hz versus the EPIKORE 3's 42Hz and reaching 110dB versus 108dB, while the EPIKORE 3's 22kg per speaker weight makes it far more practical to position and place. Against the Harbeth M30.2 XD, the EPIKORE 3's EVO-K ribbon super-tweeter extends to 34kHz versus the Harbeth's conventional dome tweeter ceiling, while its SMC Gen-2 motor technology addresses magnetic circuit distortion in a fundamentally different way to Harbeth's RADIAL cone approach. The Harbeth's 84dB sensitivity is comparable to the EPIKORE 3's 85dB, though the Harbeth's 8-ohm nominal impedance is more universally amplifier-friendly.

Does the DALI EPIKORE 3 need a dedicated stand?

The DALI EPIKORE 3 is recommended for use on a dedicated stand or shelf, and DALI offers the purpose-built EPIKORE Stand as the optimal acoustic and mechanical partner for this speaker. The EPIKORE Stand is engineered specifically for the EPIKORE 3, with a machined top plate matched to the speaker's cabinet base, integrated floor spikes with outriggers, internal cable routing, and a sand-fill option for increased mass and vibration damping. While the EPIKORE 3 can perform well on a quality third-party stand of appropriate height, the EPIKORE Stand is the recommended choice for listeners who want to realize the speaker's full acoustic potential as its designers intended.

What amplifier power does the DALI EPIKORE 3 need?

The DALI EPIKORE 3 is rated for amplifiers delivering between 40W and 250W into its 6-ohm nominal load. Its 85dB sensitivity is moderate, meaning it benefits from amplifiers with clean power delivery rather than simply high wattage, particularly for resolving the fine micro-dynamic detail that the SMC Gen-2 driver and EVO-K tweeter are capable of revealing. A high-quality integrated amplifier in the 50-150W range with stable 6-ohm output capability is appropriate for most listening rooms. Vinyl Sound can advise on specific amplifier pairings suited to the EPIKORE 3 and your room size.

Is the DALI EPIKORE 3 suitable for smaller rooms?

Yes, the EPIKORE 3 is specifically designed to bring KORE-level technology into smaller listening spaces where the EPIKORE 7, 9, and 11 floorstanders would be acoustically overwhelming or physically impractical. Its 42Hz bass extension and 108dB maximum SPL provide genuine authority and dynamic capability for a stand-mount speaker, while its compact 470 x 250 x 420mm cabinet dimensions allow placement in rooms where full floorstanders would dominate the space. The 35-120cm rear wall placement recommendation gives reasonable flexibility for room integration in typical domestic listening environments.

What finishes is the DALI EPIKORE 3 available in?

The DALI EPIKORE 3 is available in three exclusive high-gloss piano-lacquer finishes over real-wood veneer, matching the finish options across the EPIKORE floorstanding range. Contact Vinyl Sound in Toronto for current finish availability and lead times, as flagship loudspeaker finish options may vary and are subject to production scheduling and import availability in Canada.

Where can I buy the DALI EPIKORE 3 in Toronto or Canada?

The DALI EPIKORE 3 is available at Vinyl Sound, an authorized DALI dealer in Toronto, Canada. Vinyl Sound can arrange in-store demonstration by appointment, advise on the optional EPIKORE Stand, and provide amplifier pairing recommendations for the complete EPIKORE 3 system. Purchasing from an authorized Canadian dealer ensures full DALI manufacturer warranty coverage and access to local expert support.