ACTION CAN ZG-90 GREEN 500ML ANTI RUST SPRAY COLD ZINC GALVANISING RAPID DRY CAN32814

ACTION CAN ZG-90 GREEN 500ML ANTI RUST SPRAY COLD ZINC GALVANISING RAPID DRY CAN32814ZG 90 Zinc Phosphate Enhanced Paints Green Anti rust Paint 500ml Spray Satin Finish GREEN RAL 6010 ZG 90 zinc phosphate enhanced paints which prime and top coat in one application. Provides a superior combination of good drying time, great coverage and solid opacity. Demonstrates superior corrosion protection (meets ISO 12944 2, cat. C3, tested to ASTM B117) and adhesion (tested to ISO 2409: 0). The paints are RAL matched for accurate and consistent

500ml Spray - Satin Finish GREEN RAL 6010

ZG-90 zinc phosphate enhanced paints which prime and top-coat in one application. Provides a superior combination of good drying time, great coverage and solid opacity.

Demonstrates superior corrosion protection (meets ISO 12944-2, cat. C3, tested to ASTM B117) and adhesion (tested to ISO 2409:0). The paints are RAL matched for accurate and consistent colour reproduction with a longlasting satin finish.

Application:

General fabrication: Use on bare, degreased metal to provide an effective, colour-matched finish with good long-term protection.

Facility Maintenance: use for repairing and maintaining fences, metal sheets, air conditioning units and ducting.

Complementary products: TF-90 for surface degreasing, MZ-90 for enhanced anticorrosion performance. (Cathodic protection) TF-90 / Partcode 1848 MZ-90 / Parcode 1972

Key Features

• 2-in-1: Primer and Topcoat
• Effective protection against corrosion
• Excellent adhesion and flexibility for longterm performance (ISO 2409:0)
• Crossrail approval #CRL-MCR-004850
• Tested to ASTM B117 and DIN EN ISO12944-2
• RAL referenced colour matches available: Black, Red, Blue, Green, White, and Yellow
• Also available as ZG-90 Silver - see separate data Specifications Tab - Partcode 1785 and 2018

Application

General fabrication: Use on bare, degreased metal to provide an effective, colour-matched finish with good long-term protection.

Facility Maintenance: use for repairing and maintaining fences, metal sheets, air conditioning units and ducting.

Complementary products: TF-90 for surface degreasing, MZ-90 for enhanced anticorrosion performance. (Cathodic protection) TF-90 / Partcode 1848 MZ-90 / Parcode 1972

Directions for use

• Use in well ventilated area.
• Remove any rust and scale with a wire brush. Ensure that the surface to be coated is clean, dry and free from grease.
• ZG-90 contains solids which settle during storage. Aerosol: shake the can vigorously until the agitator ball is free and continue shaking for a further minute. Tin: Carefully stir the paint until solvent and solids are thoroughly mixed.
• Shake/stir periodically during application.
• Apply in light, even coats - best results are obtained with 2 - 3 light coats rather than one heavy coat.
• Additional coats can be applied after 15 - 20 minutes.
• When finished: clear the aerosol valve by briefly spraying the can upside down. When using the tin, firmly reseal it. Clean brushes with White Spirit.
• Do not use on the inside of water storage tanks.
• Remove prior to welding.

Technical Data:

Storage and Shelf Life

The aerosol product may be stored at normal ambient temperatures and has a shelf life of not less than 48 months with correct storage. Aerosols should always be stored below 50 C, away from direct heat and naked flame.

The tin/bulk version may be stored at normal ambient temperatures and has a shelf life of not less than 48 months with correct storage. It should always be stored below 50 C, away from direct heat and naked flame.