,
and
Promo Codes Available:
The Go Power! AIC Series 3000-Watt Dual-Leg Advanced Inverter Charger is a powerful all-in-one off-grid solution that combines an inverter, battery charger, and transfer switch in a sleek, low-profile package. Designed for 50-amp RV and marine systems, it accepts split-phase or dual-input single-phase AC power from shore or generator, recharges your house batteries with up to 150 amps, and seamlessly passes excess AC power to run downstream appliances. When AC power is disconnected, it efficiently converts 12V DC battery power into 3000 watts of clean, reliable 120V AC electricity on both output legs. Featuring built-in mobile app connectivity, PowerTrak™ compatibility, and a 3-year warranty, this UL-certified unit is ideal for larger RVs, boats, and off-grid applications requiring 50-amp service.
Key Features & Benefits
All-in-One 3-in-1 System: Combines a 3000W pure sine wave inverter, a 150A multi-stage battery charger, and a 50A automatic transfer switch in a single unit, simplifying installation and saving valuable space.
50A Built-in Transfer Switch: Accepts split-phase (120/240V) or dual-input single-phase AC sources, automatically switching between incoming AC power and inverter power in <20ms for seamless, uninterrupted operation of all appliances.
150A Battery Charger: Delivers rapid, multi-stage charging (Bulk, Absorption, Float, Equalize) to restore your battery bank quickly and efficiently, with external temperature sensor compensation for optimal charging in any climate.
Pure Sine Wave Output on Both Legs: Produces clean, stable 120V AC power on both L1 and L2 outputs with <3% THD, ensuring sensitive electronics operate safely and efficiently. In inverter mode, both legs are active with 120V each (zero voltage difference between them).
High Surge Capacity: Delivers 6000W for 200ms, 4800W for 5 seconds, and 3300W for 5 minutes – reliably starting demanding motor-driven loads like air conditioners, refrigerators, pumps, and power tools.
PowerTrak™ Compatible & Mobile App Connectivity: Uses built-in RV-C communication to interact with PowerTrak™ products (advanced lithium batteries, battery manager kit, Dometic MPPT solar controllers). Monitor solar stats, battery levels, and power consumption in real time via the Go Power! Connect / Dometic Power app.
Comprehensive Protections: Guards against AC over/under voltage, AC over/under frequency, AC overcurrent, AC output overload/short circuit, DC over/under voltage, and over-temperature for long-term reliability.
Power Sharing Mode: Automatically reduces battery charge current when high AC loads are present, preventing overload of the input breaker (generator or shore power) and optimizing available power.
Low Power Consumption Modes: Uses <25W in no-load operation, <15W in standby, and <2W in hibernation mode – preserving battery power when full inverter output isn't needed.
Easy to Install: Lightweight design (21.7 lbs) with multiple approved mounting orientations, push-in cage clamp AC terminals that accept up to 4 AWG wire, and clear labeling for straightforward professional installation.
3-Year Warranty: Backed by Go Power!'s comprehensive 3-year limited warranty for peace of mind.
Technical Specifications
| Specification | Detail |
|---|---|
| Manufacturer | Go Power! |
| Model | AIC-3000-12-DL |
| Inverter Continuous Power | 3000 W |
| Surge Power (200 ms) | 6000 W |
| Surge Power (5 sec) | 4800 W |
| Surge Power (5 min) | 3300 W |
| Nominal DC Voltage | 12 VDC |
| Output Voltage | 120 VAC (programmable) on L1 and L2 |
| Output Frequency | 60 Hz (programmable) |
| Output Waveform | Pure Sine Wave |
| THDV | < 3% @ Nominal Voltage |
| Peak Efficiency | > 85% |
| No Load Power Consumption | < 25 W @ 12.5 VDC |
| Stand-By Power Consumption | < 15 W @ 12.5 VDC |
| Hibernation Mode Consumption | < 2 W @ 12.5 VDC |
| Max Charging Current | 150 A |
| Multi-stage Charging | Bulk, Absorption, Float, Equalize |
| Temperature Compensation | External sensor: -25 mV/°C |
| Power Factor Correction | < 0.95 (1 C) |
| AC Input Voltage Range | 65-140 VAC (per leg) |
| AC Input Frequency Range | 55-65 Hz |
| Max AC Input Current (Pass-through) | 50 A total (L1 + L2) |
| Transfer Time | < 20 ms |
| HBCO / HBCI | 16.5 / 15 VDC |
| LBCO / LBCI | 10.5 / 12.5 VDC (programmable) |
| Max DC Input Voltage | 17 VDC |
| AC Input Source Types | Split-phase (120/240V) or dual-input single-phase |
| Operating Temperature (without derating) | -20°C to 40°C (-4°F to 104°F) |
| Operating Temperature (with derating) | -20°C to 60°C (-4°F to 140°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Relative Humidity | 5% to 95% non-condensing |
| Certifications | FCC Class B, ICES-003 Class B, UL 458, CSA 107.1, ABYC A31, ABYC E11 |
| Warranty | 3 years |
Mechanical Specifications
| Specification | Detail |
|---|---|
| Dimensions (L x W x H) | 19.7 x 11.3 x 4.4 in (499 x 288 x 112 mm) |
| Net Weight | 21.7 lbs (9.84 kg) |
| Recommended DC Cable Size | 4/0 AWG |
| Recommended DC Fuse | 400 A Class T |
| Recommended DC Install Kit | GP-DC-KIT5 |
| Recommended AC Wire Size | 6 AWG |
| Recommended AC Breaker Size | 50 A (dual pole) |
| AC Terminal Type | Push-in cage clamp, accepts up to 4 AWG |
| AC Input/Output Strain Relief | Fits cables up to 1.0 in (26.5 mm) diameter |
Included Parts
| Item | Quantity |
|---|---|
| Advanced Inverter/Charger | 1 |
| Battery Temperature Sensor | 1 |
| Pre-installed DC Terminal Flange Nut (M10) | 2 |
| Pre-installed Ground Terminal Nut (M10) | 1 |
| DC Terminal Lugs: M10 (3/8") | 2 |
| Network Cable | 1 |
| Power Disconnect Harness (84283) | 1 |
Product Documents
Spec Sheet: Download PDF
User Manual: Download PDF