Pay in installments of $23.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 7 - Aug 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
KYO-EI WIDE TREAD SPACER M12xP1.5 5111W1Brand KYO EI Product Number 5111W1 Product Description Screw size Thread size: M12 x P1. 5 HOLE: 5 PCD: 114. 3 Thickness mm Thickness: of 11 hub bolts height (Hub bolts height): 24mm inside diameter (Inner . dia) : 70mm outside diameter (outer dia) : 145mm JAN code: 4965581 806389 Remarks genuine and commercially available aluminum wheels with bolt on mounting, grade up to the wide tread. precise design, the original production of thorough quality
| Brand | KYO-EI |
| Product Number | 5111W1 |
| Product Description | Screw size Thread size: M12 x P1.5 HOLE: 5 PCD: 114.3 Thickness mm Thickness: of 11 hub bolts height (Hub bolts height): 24mm inside diameter (Inner . dia) Φ: 70mm outside diameter (outer dia) Φ: 145mm JAN code: 4965581 806389 |
| Remarks | ■ genuine and commercially available aluminum wheels with bolt-on mounting, grade up to the wide tread. ■ precise design, the original production of thorough quality control (MADE IN JAPAN) is a high-quality product. ■ hub bolts are adopted using a chromium-molybdenum steel, hardened, high-strength, high durability of the bolt. ■ become the body and Tsuraichi, contribute to the coolness of the appearance. With the widening of the tread, improvement of turning performance. ■ prevent loosening of the spacer in a dedicated nut (for 11~15mm). It can withstand hard sports driving, high reliability. ■ Number of Holes HOLE: 5H · 4H ■ PCD: 100 · 114.3 ■ Thickness Thickness: 11/15/20/25 / 30mm ■ outside diameter outer dia:. 145mm ■ SIZE: M12 × P1.5 / M12 × P1.25 ■ material material: aluminum / bolt (SCM435 chromoly steel) ● 2-sheet set (2pcs sET) accessories / dedicated nut-only ● adapter ※ dedicated hub ring, sold separately. warning attached non models ● 1 number, 4 number, vehicle type ● mounting surface 8 number is not flat, for special vehicles other than drum brake vehicle ● the is, please contact us. Notes of when wide tread spacer mounted ※ Please do not other than domestic cars is mounting. ● If you have received a strong shock to the tire wheel, takes excessive force to the wide tread spacer, there is a possibility to cause damage as it is to use, because it may lead to an accident, the product should not be used in absolute . ● by offset or the like of the spacer thickness and the wheel, there is a If you can not attached to the vehicle (contact to protrude from the fender-tire house). When you purchase, on the confirmation of the current car state, please purchase. ● Since the steel wheel mounting surface is not a plane, do not install. ● Before mounting, be sure to rust the mounting surface and the vehicle body hub side of the back side of the wheel with a wire brush or the like, should be installed from drop the dirt. ● body of the hub bolts, spacer of the hub bolts, do not painted with oil or grease on the mounting nut. There is a possibility that the bolt may be damaged tightened more than necessary. If you ● on the back side of the body of the hub side and the wheel there is a foreign matter and projections, do not install. when fitted with a wide tread spacer to the body hub bolts ●, when the bolt is protruding from the spacer, do not install a wide tread spacer. If you ● on the back side of the mounting wheel of "escape" is, it is possible to attach the wide tread spacer. However, the depth is genuine stud bolt of "escape", if there is no depth to fully escape, do not install a wide tread spacer. If you ● mounting surface is a drum brake vehicle and projections not flat can not be mounted. In addition, the vehicle of steel wheels Do not install absolutely. ● Some of the vehicle, there is a vehicle hub diameter is large, there is a case where the wide tread spacers can not be mounted. When you purchase, please purchase after confirming the vehicle hub diameter and the inner diameter of the wide tread spacer. ● After mounting the wide tread spacer, it is recommended alignment adjustment to prevent uneven wear of the tire. ● If you are installing on a vehicle sliding door, please pay attention to the protrusion of the tire. Sliding door it may not be opened interfere with the tire . ● For 10mm of hub-centric ring mounted, vehicle hub height 12mm or more vehicles, since there is a possibility that can not be worn by the shape of the wheel mounting surface, please note. ● attachment, for the failure and damage caused by errors of handling, does not guarantee at all. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 18 reviews
Sort
Product Reviews
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly.
while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Works For Desired Use
Color: Black, Size: 4 Panel-136‘’W-Round Pad
I recently purchased the Room Divider 6FT Folding Privacy Screens, 4 Panel Partition Room Dividers, and I must say, it has transformed the way I use my living space. The four-panel design is both elegant and functional, providing instant privacy without feeling bulky or overwhelming in my room.
Setting it up was a breeze; the folding mechanism is smooth, allowing me to adjust the configuration as needed—straight, angled, or zigzag. I particularly appreciate the sturdy build; the panels feel solid yet lightweight, making it easy to move around when I want to reconfigure my space.
Aesthetically, it’s a great addition. The neutral finish blends well with my décor, and the simple design doesn’t draw too much attention while still offering a sense of separation. It’s perfect for creating a temporary office corner, dividing a studio apartment, or even using it as a backdrop for online meetings.
If I had to point out a minor downside, it would be that the divider isn’t completely soundproof—so conversations can still carry through—but for visual privacy and space management, it’s excellent. Overall, I’m extremely satisfied and would recommend it to anyone looking for a versatile and stylish room divider.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2026