Audio Technica ATW-901A/L System 9 Lavalier Microphone System with Pro 35cW Mic

Audio Technica ATW-901A/L System 9 Lavalier Microphone System with Pro 35cW MicTHIS BUNDLE INCLUDES Audio Technica ATW 901A L System 9 Lavalier Microphone System: ATW 901A L Audio Technica Cardioid Condenser Clip on Instrument Microphone: PRO35CW ATW 901A L ATW R900a receiver and ATW T901a body pack transmitter with omnidirectional Lavalier microphone. Audio Technica's System 9 is a four channel frequency agile wireless system designed to provide rock solid performance along with easy setup and clear, natural sound quality.

THIS BUNDLE INCLUDES

• Audio Technica ATW-901A/L System 9 Lavalier Microphone System: ATW-901A/L
• Audio Technica Cardioid Condenser Clip-on Instrument Microphone: PRO35CW

ATW-901A/L

ATW-R900a receiver and ATW-T901a body-pack transmitter with omnidirectional Lavalier microphone.

Audio-Technica's System 9 is a four-channel frequency-agile wireless system designed to provide rock-solid performance along with easy setup and clear, natural sound quality. Featuring sleek, stackable, contemporary styling, System 9 is available in handheld, head-worn, guitar, lavalier, and body-pack configurations. The system offers four compatible user-switchable VHF channels (169.505, 170.245, 171.045, and 171.905 MHz).

Each System 9 configuration includes the ATW-R900a receiver and either a body-pack transmitter or handheld microphone/transmitter. The ATW-R900a is a non-diversity, single-channel receiver with an advanced dipole antenna design for an extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R900a also offers volume control along with AF Peak, RF, and Power indicator lights.

• Easy operation and clear, natural sound quality
• 4 selectable frequency-coordinated VHF channels
• Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
• Reliable performance and durable construction

Advanced dipole antenna system for extended operating range

CHARACTERISTICS

OVERALL SYSTEM SPECIFICATIONS

• Operating Frequencies: VHF high-band, 169 MHz to 172 MHz
• Modulation Mode: FM
• Maximum Deviation: +/-10 kHz
• Dynamic Range: >/=90 dB (A-weighted), typical
• Total Harmonic Distortion: <1% (at 1 kHz, +/-10 kHz deviation)
• Operating Range: 200' (60 m) typical Open range environment with no interfering signals
• Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Battery performance may be reduced at very low temperatures
• Frequency Response: 80 Hz to 13 kHz
• Maximum Simultaneous Use (Recommended): 200' minimum

RECEIVER SPECIFICATIONS

• Receiving System: Non-diversity, single-channel, dual antenna system
• Image Rejection: 50 dB minimum
• RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination)
• Audio Output: Nominal Output Level XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load) 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)
• Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
• Operating Temperature Range: 40° F (4° C) to 110° F (43° C)
• Dimensions: 7.48" (190.0 mm) W x 1.82" (46.2 mm) H x 5.06" (128.5 mm) D
• Net Weight: 12.0 oz (337 grams)
• Accessory Included: Power supply

BODY-PACK TRANSMITTER SPECIFICATIONS

• RF Power Output: 10 mW
• Spurious Emissions: Following federal and national regulations
• Input Connections : Four-pin Locking Connector 
• Pin 1: GND 
• Pin 2: INST INPUT 
• Pin 3: MIC INPUT 
• Pin 4: DC BIAS +9V
• Batteries : Two 1.5V AA not included
• Battery Life: 8 hours (alkaline)  Depending on battery type and use pattern
• Dimensions: 2.76" (70.2 mm) W x 4.08" (103.7 mm) H x 0.98" (24.9 mm) D
• Net Weight: 2.8 oz (80.0 grams) without batteries

PRO35CW

Designed for sax, toms, brass and percussion, the PRO35cW excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount^® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone's cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source. 

• UniMount® clip permits accurate positioning, provides shock resistance and protects element
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Extended frequency response captures subtle nuances of the performance
• Terminated with locking 4-pin connector for A-T UniPak^® body-pack wireless transmitters
• 55" (1.4 m) cable
• Includes AT8418 instrument mount for brass, reeds, drums, etc

CHARACTERISTICS

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Patter: Cardioid
• Cable: 5.5' (1.4 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with HRS4-type connector
• Accessories Included:  AT8418 UniMount® microphone instrument mount; soft protective pouch