Trim Cut Saw Blade TCG 10 in. x 80 Tooth

Trim Cut Saw Blade TCG 10 in. x 80 ToothTrim Cut Saw Blade TCG 10 in. x 80 Tooth Diameter 10" Teeth 80, TCG Arbor 5 8" Kerf . 125 Angle 10 Max RPM 8,000 Made In Italy. Our Trim Cut Saw Blade is designed for crosscutting across the grain with easy feed into the material. The blade leaves a smooth, clean, chip free cut on the top and bottom edges of the material. The high tooth count and TCG design make the blade perfect for use when finishing is a high priority. A positive hook angle ensures

Trim Cut Saw Blade TCG 10 in. x 80 Tooth

• Diameter          10"
• Teeth                 80, TCG
• Arbor                 5/8"
• Kerf                   .125
• Angle                10°
• Max RPM           8,000

  Made In Italy. Our Trim Cut Saw Blade is designed for crosscutting across the grain with easy feed into the material. The blade leaves a smooth, clean, chip-free cut on the top and bottom edges of the material. The high tooth count and TCG design make the blade perfect for use when finishing is a high priority.

• A positive hook angle ensures an aggressive cut and a faster feed rate.
• Cuts most Hardwood and Softwood, Chipboards, and Particle Boards.
• Use on Miter Saw, Radial Arm Saw, Stationary Table Saw.

  Backordered items allow 3 weeks.   Read and see our blades in action: https://www.woodshopnews.com/video/a-cut-above-from-wts  

Have custom blade needs?

Click here to order WTS custom blades: https://woodtoolingshop.com/wp-content/uploads/2021/03/Custom-Saw-Blades.pdf There are endless brands available, with only one common feature. That is a round steel plate or circular blade full of sharp teeth that tear through the wood. Every blade has unique features regarding the number of teeth and geometry of the sharpening. Each manufacturer has its own configuration and design ideas. Some view circular saws as more ideal for rough carpentry than for fine woodworking. That is not true at all. In the right hands, circular saws cut straight, clean lines. But a lot depends on the blade you use. The difference between blades is their teeth design. Ripping blades have fewer evenly spaced teeth, while crosscut blades have more teeth and specific geometry ground onto each tooth. Combination blades have 50 teeth and 10 deep gullets to handle ripping as well as cross-cutting requirements. They generally have a heavier blade body for maximum stability. If budget is an issue, it is best to invest in a premium combination blade to get started.