SKU: 66364925752

Emerson Custom 3-Way Telecaster Prewired Kit - Premier Pro

$112.49 $124.99
Save 10%
No.2 Bestseller on watersyst.com >

Pay in installments of $31.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 2 - Aug 7

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Emerson Custom 3-Way Telecaster Prewired Kit - Premier ProMaker: Emerson Custom Model: 3 Way Telecaster Prewired Kit Condition: New Description: EMERSON PREMIER PRO POTS We at Emerson Custom formerly had our own specd line of Emerson PRO CTS pots but when 2020 rolled around and the supply chain blew up, it was finally time to take matters into our own hands. Faced with lead times that were 20x longer than that of during a normal time, Mitch was stuck between a rock and a hard place. He didnt have access to

Maker: Emerson Custom

Model: 3-Way Telecaster Prewired Kit

Condition: New

 

Description:  

EMERSON PREMIER PRO POTS

We at Emerson Custom formerly had our own spec’d line of “Emerson PRO CTS pots” but when 2020 rolled around and the supply chain blew up, it was finally time to take matters into our own hands. Faced with lead-times that were 20x longer than that of during a normal time, Mitch was stuck between a rock and a hard place. He didn’t have access to his own supply of his spec of CTS pots because all the major brands were vying for anything and everything they could get from the factories. Mitch was tired of simply accepting the industry norm that CTS pots are “good enough”, or the “best” available. So, he set out to create his very own design and brand of in-house pots that not only look familiar but are built to an incredibly consistent feel and function from lot to lot. It took a ton of money, time and effort, but we feel that these new Emerson PREMIER PRO pots are the best pots available… PERIOD.  We weren’t constrained by an off the shelf spec sheet of options to choose from.

We designed and developed these pots from the ground up. The feel and consistency from pot to pot is incredible. We put extra care into the little details to make sure these translate to the end user. We built these to be rugged and reliable. We chose to use robust Fiberglass as the substrate the solder lugs and resistive track are mounted to because its super strong, rigid, and won’t easily bend and snap like those in most every guitar. The taper we used on these is a custom 20% Audio Taper that is a proprietary design from Emerson. This taper works equally as well in the volume position as it does in the tone position. Our Solder lugs are a unique design… slightly oversized for plenty of room to run ground wires/buss wires and any other connection you need to the pot lugs.

3-WAY TELECASTER PREWIRED KIT
  • Handwired in the USA
  • Features the new & improved Emerson PREMIER PRO Potentiometers
Description

Our 3-Way tele kits are our most popular prewired kit.. and for good reason; They improve your tone! We take great pride in using premium components that work and sound better than stock electronics found in your guitar. Our pots are hand metered and matched for great consistency and even taper on both the volume and tone knob (better control when rolling down the volume knob... no more mud) Our Emerson Paper in Oil capacitors sound amazing! Paper in Oil capacitors were used in vintage Fender and Gibsons for good reason... They sound amazing. Our kits are painstaking wired by hand one at a time in Bixby, Oklahoma, USA. We take great pride in our solder work and neatness when we craft our prewired kits. We build our kits to last a very long time and perform great. We think you will appreciate the detail both sonically and visually that goes into each and every one of our prewired kits.

This is a 3-Way Tele prewired assembly for Telecaster style guitars featuring 2 single coil pickups. It will drop into most American Fender Teles with no modification. **(If purchasing the Reverse control plate kit please see install notes below)**

Wired with 22 AWG vintage push-back wire for that vintage look and sound. Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life. If you are installing this on an import guitar with metric sized pots you may need to ream your control plate holes to accept the slightly larger US-Spec pots and buy US-Spec knobs.

Includes
  • (2) Emerson PREMIER PRO Solid Shaft Shaft Pots
  • (1) Oak Grigsby OR Centralab 3-Way Switch 
  • (1) Switchcraft 1/4" Mono Input Jack 
  • (1) 0.047uf Emerson Paper in Oil Capacitor *(0.022uf are used with 500K-Ohm Pots Option)* 
  • (1) Volume Mod 
  • Wiring Diagram
Additional Information

**BUILT & SPACED FOR USE ON STANDARD USA FENDER STYLE TELE CONTROL PLATES. CENTER TO CENTER OF VOLUME AND TONE POTS IS 2.50 INCHES. IMPORT GUITAR'S CONTROL PLATES MAY BE SPACED DIFFERENTLY**

Reverse Control Plate Setup Note: Volume, Tone & 3-way Switch. (Volume Control is parallel to the bridge pickup for players that like to use their volume knob a lot for swells and more overall control). **Due to the nature of "flipping your controls" you may have to modify your existing cavity route by lengthening the area underneath the the control plate to fit the reverse control layout.**

**Control Plate, Switch Tip or Knobs Not Included**

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 66364925752

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 24 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
X
Verified Purchase
Xiaoli Zhang
Port Orchard, US
★★★★★ 5
Help training kitten poop
I have young kitten. It is attractive to me to use the Potty Training Tray. Kitten does not know to go to litter box initially. And they even eat cat litter. For safety, the trining tray is a good start to train their poop habit and also help a smooth transition to litter box when they get older.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 9, 2026
M
Verified Purchase
Michael Holbrook
Houston, US
★★★★★ 5
Training pad holder literally rises above the competition
Size: 24"X24"
We have been through a variety of potty pad products during our housetraining journey with our Havanese pup. The Petphabet training pad holder has been the best by far and has ended our search for a number of reasons: Pros: 1. Grid design keeps puppy from chewing/tearing/destroying/eating the potty pad. 2. Size is perfect for our pup even as he is getting bigger (15 lbs) - mileage may vary for larger pups/dogs. 3. HERE IS THE REASON THIS PAD HOLDER STANDS OUT AMONG THE COMPETITION - The top grid is elevated off the surface layer where the pad lays, which allows an air gap between the standing surface and the potty pad. This allows the urine to fall to the pad without pooling and without your pup stepping in it and tracking it everywhere! Cons/Areas for improvement: 1. We like blue but it's not for everyone! 2. The "posts" holding the mesh up from the base carry all of the weight of the dog and in some cases jumping or playing on the pad holder can cause the edges of the posts to cut through the potty pad liner, causing a (minor) leak. I would recommend the manufacturer design any subsequent models with larger, flat surfaces on the post supports. 3. The 4 piece design means the base is not solid but has a split down the middle that is not waterproof. This can be remedied by caulking the 2 sides of the base together with clear silicone assuming you will no longer need to disassemble the unit. 4. Poo can get caught in the grid if your pup has loose stool. If not removed quickly your pup may step on it and really pack it in there. After many trials with other products, we are very happy with this training pad holder and have bought a total of 3 units for different areas of our house. I highly recommend for small dogs/pups!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 28, 2023
K
Verified Purchase
KJP
Port Orchard, US
★★★★★ 5
Works Great!!!
Size: 18"X24"
I have 2 pugs and have trained them to "go" on a grid. I started with another brand (Klean Paws) but found this brand (Petphabet Puppy Training Pad Holder) to be superior in several ways. This training pad holder is designed much better. The plastic grid is well supported so the puppy does not get wet paws when waling on the grid. The overall design of the training pad holder makes it very easy to replace training pads. Standard training pads (17.5" x 23.5") fit the medium Petaphet puppy training pad holder perfectly. Just lay the pads flat on the bottom, place the grid on top and clip it all into place with the frame. The frame holds everything in place and keeps any loose ends, hidden from mischievous puppies. It takes a lot of effort to train puppies to "go" on a grid, but it's worth it. I started with one grid in a crate. Then, I gaited off my kitchen area, with 4 medium grids (as shown in the video). You cannot expect a puppy or dog to just go to one spot and do their thing. Dogs like to sniff and walk around before they "go." They need room. I suggest 2 medium girds per medium-sized dog. I have 2 pugs and 4 grids. I reward them with a pinch of peanut butter, whenever I see them go on the grid. I simply pickup the #2 with TP and flush it down the toilet. I replace the pads, in the 4 grids, once a day. NOTE: The sellers of the dog training pad holders seem to come and go. If you cannot find this particular training pad holder, do a search for Mesh training pad holder. Be sure to get a training pad holder that has 3 parts -- the bottom tray, the mesh grid, and a frame that holds it all together. Some of the simpler grids have just 2 parts (bottom tray and top). They are simpler, but do NOT keep paws dry.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 1, 2018
M
Verified Purchase
Miriam Velez
Lake Worth, US
★★★★★ 4
Good quality, but my dog didn’t like it
Size: 24"X24"
The product arrived in perfect condition and looks well made. It’s sturdy and easy to clean, so I can see it working well for many dogs. However, my Cavapoo (17 lbs, 1 year old) never liked it. I tried for several weeks, but there was no way to get him to use it. I think it depends on the dog’s preference. For us, it didn’t work, but the product itself is good quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 20, 2025
K
Verified Purchase
Kindle Customer
Chelsea, US
★★★★★ 5
Excellent pee pad tray has "legs" to keep feet off of the pad
Size: 18"X24", Size: 18"X24"
My 10 week old Pekingese learned quickly to use it, and Pekingese are a very stubborn breed. We started training her by removing the grid because she was used to paper. It snaps out easily. We used pee pads with sticky tabs to attach the pad, then snapped the "frame" in place without the grid. Within a few days, she had figured it out, so we snapped the grid back in so her feet never touch the used pad. No more wet feet. I bought the medium size that is aqua blue. For those that ask if it will fit their crate...measure your crate! My large crate is 42" x 23" and the tray fits two ways as seen in the pictures. My small crate is 23" x17" and the tray does NOT fit. I wish the company made a 10" x 14" tray for traveling. (pink???) Start using it when you have a couple of days to give your puppy 100% of your attention. 100% attention!! If she/he does not use it, then it is your fault for not paying attention. My puppy would go every 15 minutes at first! Put a WHITE plastic shower curtain liner on your floor so you can see if she misses it. The liner wipes off easily with Clorox wipes or goes in the washing machine. For those puppies who stand on the edge of the tray, but still miss it because their back legs are barely on it, help them walk forward and put plastic under the tray to catch any misses. Now, at 4 months old, she seldom uses it, but it is available. Her pen is getting larger and larger. After she pees outside, we let her run around in in the living room for about an hour, then she goes back in the pen. Her attention span is short and she can't always make it back to her tray in the pen. My husband always brings her in the house after she has peed one time outside, but if I take her outside, I wait until she goes at least 3 times and there won't be accidents in the house. Sometimes, it takes more than 1 time to empty their bladder. This pad tray is not like others on the market. Look closely at other grids, and you will see that other trays do not have the "legs" on the under side of the grid that keep the plastic grid from touching the used pad. My puppy tried to chew on the plastic tray, but she is always in our vision so we just say, "Ahhh!" and she leaves it alone. No problems with chewing. The Ahhh!" stops her every time, and we say it to stop her from doing anything wrong. Some people say their dog chews on it. Just like children, dogs need to be taught. Don't complain about how the pee pad or pee tray doesn't work. Teach your dog or your dog to not chew on it. Like others have mentioned, my puppy likes sleeping on the tray at night, because it has air circulating under it, so it is cooler than her bed. (Not the fault of the product!) We can't break her of that habit without confusing her or removing the tray. She may stop using it if we teach her to get her off it. I have been putting frozen gel compresses wrapped in a towel in her play pen during the day, and as long as the compress stays cold, she will lay on it instead of the pad tray. Always watch, so a dog doesn't chew on the gel compresses. I don't know why some people have said that urine runs out, because it is sealed. Maybe they are not changing the pads often enough. I started out changing them twice a day, then since my puppy started flea and tick medicine, she could start going outside. I changed the pad once a day then. Now, at 4 months old, she goes outside, but we put it in her large kennel at night. (The tray is too big to fit in her small dog kennel.) For the last three days and nights, she has not used it at all, but it is there just in case. If your tray does not have rubber pads on the bottom, buy some or put the tray on a piece of rubber kitchen shelf liner. My tray doesn't slide. If your dog runs to it and jumps on quickly, it may slide, so put something under it. Remember, your dog may not want to walk on it, but it is up to you to teach the dog to walk on it. They don't get a choice! You are in charge!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 17, 2020

recommand products

Women's Escalante 4
130.00
Men's Beast 24 Extra Wide
120.00
RiteAV 4 Banana (2 Speaker) Wall Plate with 2 x RCA (Red/White) and 2 Cat6 - Flat 2 Gang [Light Almond]
41.12
RiteAV 2 Port SC-APC-Simplex Female-Female Coupler Wall Plate with SVGA Jack [Stainless/White]
23.95
RiteAV 1 Port CAT5E 1 USBC Female-Female Coupler Wall Plate with SVGA Jack [Stainless/White]
23.95