Pay in installments of $274.41 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 23 - Jul 28
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Lenco 18" x 14" Heavy Duty Performance Trim Tab Kit w/ LED Indicator Switch Kit 12VHeavy Duty Performance Trim Tabs Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are Electro Polished 12 Gauge 304 SS with 1" turned up edges, 85 degree inside taper, and 1 4" diameter hinge pin. Extreme Duty actuators with 5 16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C channel mounting brackets, and 3. 75"
Heavy Duty Performance Trim TabsFast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are Electro-Polished 12 Gauge - 304 SS with 1" turned up edges, 85 degree inside taper, and 1/4" diameter hinge pin. Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
We make the best boats better!
Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's HD series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?
- All stainless steel construction (no dissimilar metals), Electro-Polished Blades for long lasting good looks
- Actuator speed is precise and controllable so there are no surprises at top speeds
- Models have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliability
- Models use solid stainless steel billet rams that are chemically polished for unsurpassed durability
Actuators
- Instant response
- Fully submersible, maintenance-free and sealed for life
- High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case
- 5/16" stainless steel bolts
Tactile Switch w/ Indicator LED for all Single Actuator Trim Tab Systems
Features:
- Self-contained, sealed keypad
- Self-contained, sealed control box module
- Fade/smudge-proof, laser engraved graphics
- Plug & play switch wiring harness connector
- Includes 36" power pigtail for control box
- 2" hole cut-out size, overall size 2.75" x 2.75"
- Built-in retract feature returns tabs to a fully retracted position when power is removed
- 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times
- Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight
- 12 & 24-volt compatibility
- Includes Self-Check Feature
Each kit contains:
- Tactile LED Indicator Switch Kit
- 2 actuators wth 6' Lead and Deutsch Plugs
- 2 12 Gauge SS Electro-Polished trim tab planes
- 2 20' Actuator Extension Wiring Harnesses
- Boat-Mounting Hardware supplied by customer
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Manufacturer Part Numbers: RT18X14HDI
Brochure Literature (PDF)
GRP:WRO
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 22 reviews
Sort
Product Reviews
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ.
Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that.
Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
★★★★★ 5
This will work but prep is key!
I have an older RV that the gelcoat has dulled and is oxidized, but otherwise in good shape. I have buffed and polished in the past only for it to last a short time. I was looking up different products to try and this one has such good reviews, I thought I would give it a try. I bought the kit with the Poliglow and the Poliprep, with the scrubber and the microfiber glove. I started with the poliprep and it did a great job of gettting the streaks and black marks off. You spend a lot of time scrubbing to your likeness because anything that is still on the gelcoat when you apply the poliglow, it will be locked in there. The Poliglow is like a clearcoat that goes over the gelcoat. You have to build up layers and here are some of the tips and tricks I figured out that really helped my finished RV look great. First, make sure the applicator stays damp, this keeps the poliglow more uniform across the glove. Also, stick it in a zip lock bag when not using, you do not want it to dry out while you are using it. I found out that applying this in direct sunlight in warm temps, is the best method. This allows the poliglow to dry really fast. The first 3 or 4 layers will look streaky and dull but this is ok and as you build up the layers, the shine will come back. I found if you do this when its cooler, the layers do not dry as quick and you will get some permanent streaking or running. I had to remove a section I did in the evening because I noticed this. When in direct sunlight, this gave me the best results with no streaking or running. It dries fast and you can keep working. Like it says, do not do big sections at a time, keep it to small what you can reach sections and build those up and move on. As far as how much to buy? I have a 40 ft toy hauler and I got to kits and I had just enough to finish the whole thing minus the nose cap. I have Durabak on the nose cap, so I dont need to worry about that. I ended up buying one more bottle of the poliglow to have for my maintenance coats. Overall, I am pleased with how my 10 year old RV looks and other than some of the decals show age, it looks new again. If I were to buy a new RV, I would put this on right away and preserve the whole RV including the decals. Its not too expensive and its a lot of work, especially the prep, but it does end up with great results.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 21, 2023
★★★★★ 5
Excellent shine
Excellent line of products. Looking at the picture, you can see what the camper looked like before the Poli Glow. To the left of the window is the after Poli Glow.
It takes some elbow grease (follow instructions well) but well worth it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
recommand products
ZIGGY CHEN Jaquard Bomber Down Jacket Black 0M2431201
162800.00
Mandrus OTTO Gloss Black 22x10.5 +38 5X112 66.56
254.96
Vintage Henri Lloyd Shirt Medium
30.00
TSW MOSPORT Matte Black W/ Machine Face & Dark Tint 22x10.5 +35 5X120 76.1
247.37
Beyern DAMON Matte Gunmetal W/ Brushed Face 21x9 +20 5X120 74.1
200.68