Newmar 12-12-35I DC Converter

Newmar 12-12-35I DC Converter12 12 35I DC Converter This isolated series provides voltage conversion as well as input output isolation, allowing the use of negative ground gear in positive or floating ground battery systems, or vice versa. Using an isolated converter as a voltage stabilizer on 12 or 24 volt systems can solve conducted noise and interference problems on sensitive DC powered communication, navigation systems, and DC microprocessor based devices. Features: Wide

12-12-35I DC Converter

This isolated series provides voltage conversion as well as input/output isolation, allowing the use of negative ground gear in positive or floating ground battery systems, or vice versa.

Using an isolated converter as a voltage stabilizer on 12- or 24-volt systems can solve conducted noise and interference problems on sensitive DC-powered communication, navigation systems, and DC microprocessor-based devices.

Features:

• Wide range of input voltage


• Precise output voltage regulation


• Reverse polarity


• Input fuse/output fuse


• Total input/output isolation, pos. or neg. ground


• Current-limiting, short-circuit-proof output


• Automatic resetting of the thermal shutdown


• High/low input voltage shutdown


• Polyurethane conformal coating on PC board


• Power ON light


• Rugged case designed for high-vibration applications

Specifications:

• Input Voltage: 10-16


• Max Input Amps: 56


• Output Voltage: 13.6


• Output Amps (Intermittent): 35


• Output Amps (Continuous): 20


• Case Size (H x W x D): 6 x 6.8 x 16.5 inches (15.2 x 17.3 x 41.9 centimeters)


• Weight: 12 lb. (5.5 kg)


• Output: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)


• Ripple: 150 mV P-P maximum


• Regulation: 1% Line/Load


• Duty Cycle Ratings: Intermittent 20 minutes max on time, 20% duty. current limit set at approx. 105% of the intermittent rating. Continuous 24 hours, 100% duty


• Idle Current: Less than 100 mA (including power ON light )


• Operating Temp: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature


• Switching Frequency: 40 kHz


• Efficiency: 85% Typical


• Isolation Output/Chassis; Input/chassis: 250 VDC

Mechanical Specifications:

• Anodized aluminum heat sink case


• Front panel terminal block


• Heavy-duty mounting flange


• conformal-coated PC board

Options:

• Operation as battery charger or parallel redundant operation* derate to continuous duty rating (contact factory)


• Extreme vibration mounting kit. (Information below)

Option: Extreme Vibration Mounting Kit

The Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles.

The kit replaces the standard vibration kit provided with the unit and fits into the units mounting flange to act as a super shock absorber for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify Kit L for units that weigh 2 -15 lbs. and Kit H for units that weigh 16 70 lbs.