B2 Audio Loaded Subwoofer System DVPE212 1000W Dual 12" w/Monoblock Amp

B2 Audio Loaded Subwoofer System DVPE212 1000W Dual 12" w/Monoblock AmpCOMPLETE BASS PACKAGE Includes the B2 Audio DVPE212 Dual 12" Loaded Subwoofer Enclosure and B2 Audio MANI 600 Monoblock Amplifier, delivering a full 1000W RMS system with deep, powerful bass right out of the box. ENGINEERED FOR PERFORMANCE The DVPE212 enclosure is tuned to 35 Hz with dual 90 curved ports, internal bracing, and Acoustilux damping for smooth airflow, accurate response, and tight, controlled lows. HEAVY DUTY CONSTRUCTION Dual baffles,

• COMPLETE BASS PACKAGE – Includes the B2 Audio DVPE212 Dual 12" Loaded Subwoofer Enclosure and B2 Audio MANI-600 Monoblock Amplifier, delivering a full 1000W RMS system with deep, powerful bass right out of the box.
• ENGINEERED FOR PERFORMANCE – The DVPE212 enclosure is tuned to 35 Hz with dual 90° curved ports, internal bracing, and Acoustilux damping for smooth airflow, accurate response, and tight, controlled lows.
• HEAVY-DUTY CONSTRUCTION – Dual baffles, reinforced slot ports, and corner bracing eliminate flex under heavy load. Designed to fit most trunks with a slanted back for more volume and better airflow.
• CLEAN, EFFICIENT DESIGN – Amplifier controls are hidden behind a removable side panel for a sleek, compact installation while maintaining easy access for tuning.

B2 Audio DVPE212 1000W Loaded Dual 12" Subwoofer Enclosure w/ Mono Amplifier

This listing includes:

• (1) B2 Audio DVPE212 Loaded Enclosure


• (1) B2 Audio MANI-600 Monoblock Amplifier

The B2 Audio DVPE212 isn't just another prefab box - it's a fully engineered enclosure designed to perform like custom work. With features usually reserved for high-end builds, this dual 12" vented enclosure comes pre-loaded with RAVE12 subwoofers and delivers massive output, tight bass response, and long-lasting durability.

Engineered Performance

• Advanced bracing & airflow design - Corner bracing, dual slot ports, and wedged construction eliminate flex and improve sound accuracy.


• Optimized port tuning - Dual 90 curved ports are tuned to 35 Hz for deeper, smoother bass response without chuffing.


• Acoustilux damping - Reduces unwanted resonance, ensuring tight, controlled low-end performance.

Built for Bass Enthusiasts

• Perfect fitment - Designed to span the width of most trunk spaces with an angled back for increased internal volume.


• Wider frequency response - Plays from 25 Hz-200 Hz, giving you both chest-pounding lows and clear midbass.


• Flexible wiring - Run at 1 ohm or 4 ohm to match your amplifier setup.

Heavy-Duty Construction

• Non-pressed coated paper cones with dual 2.5" copper voice coils for strength and heat dissipation.


• Massive motor structure - Four 80 oz magnets per woofer for serious control and excursion.


• No-flex build - Dual baffles, reinforced slot ports, and rigid bracing maximize performance under heavy power.

DVPE212 Specifications

• Frequency Response: 25 Hz - 200 Hz


• Sensitivity: 91 dB


• Impedance: Dual 2 Ohm


• Tuning Frequency: 35 Hz


• Power Handling: 1000W


• Enclosure Volume: 3.05 cu. ft. (86.3 L)


• Port Area: 11.7 in (192 cm)


• Port Length: 6.2"


• Configuration: Dual 12" Loaded (RAVE12)


• Voice Coil: 2.5" Copper


• Magnet: (4) x 80 oz


• Gross Weight: 68 lbs (31 kg)

DVPE212 Dimensions:

• Length: 33"


• Height: 14.96"


• Depth: 16.53"

Don’t be discouraged by the numbers - the MANI-600 is designed to run the DVPE212 enclosure with maximum efficiency. Its high damping factor, clean signal path, and tightly matched impedance curve allow it to deliver far more real-world output than its rated wattage suggests. This amp and enclosure were engineered together for optimal performance, ensuring deep, controlled bass and long-term reliability without wasted power.

Mani 600 Specifications

• RMS Power @ 4 ohm 14.4v <1% THD: 450 W x 1


• RMS Power @ 2 ohm 14.4v <1% THD: 600 W x 1


• RMS Power @ 1 ohm 14.4v <1% THD: 600 W x 1


• Frequency Response: 10 Hz - 500 Hz


• Signal to Noise Ratio: > 90 dB


• Input Sensitivity: 5v ~ 0.35v


• Power Terminal Gauge: 6 Gauge


• Fuse Rating: 70 Amps


• Damping Factor: >400


• High level input: Yes

Mani 600 Crossover Circuit:

• Crossover Circuit: 24 dB / Oct


• Low Pass Crossover: 50 Hz - 500 Hz


• High Pass Crossover: N/A


• Subsonic Crossover: 5 Hz - 40 Hz


• Bandpass Crossover: N/A

Mani 600 Measurements:

• Length: 10.6"


• Width: 6.45"


• Height: 2.28"


• Weight: 3.3 lb