3850396 MAP Sensor for Volvo Penta OMC 4.3L 5.0L 5.7L 7.4L 8.2L | JLM Marine

3850396 MAP Sensor for Volvo Penta OMC 4.3L 5.0L 5.7L 7.4L 8.2L | JLM Marine3850396 MAP Sensor for Volvo Penta OMC 4. 3L 5. 0L 5. 7L 7. 4L 8. 2L JLM Marine This aftermarket MAP (Manifold Absolute Pressure) Sensor is designed specifically for OMC and Volvo Penta marine engines ranging from 4. 3L to 8. 2L displacement. Engineered to deliver reliable performance on fuel injected inboard and sterndrive applications from the mid 1990s through 2007, this sensor ensures accurate air pressure readings for optimal fuel mapping and

3850396 MAP Sensor for Volvo Penta OMC 4.3L 5.0L 5.7L 7.4L 8.2L | JLM Marine

This aftermarket MAP (Manifold Absolute Pressure) Sensor is designed specifically for OMC and Volvo Penta marine engines ranging from 4.3L to 8.2L displacement. Engineered to deliver reliable performance on fuel-injected inboard and sterndrive applications from the mid-1990s through 2007, this sensor ensures accurate air pressure readings for optimal fuel mapping and engine efficiency.

Direct replacement for OEM part numbers: OMC 3850396, Volvo Penta 3850396, and Sierra Marine 18-7684. This sensor is built to OEM specifications and tested for marine environments, providing a cost-effective solution without sacrificing quality.

• Application: Marine engines only—designed for saltwater and freshwater use
• Compatibility: TBI (Throttle Body Injection) fuel systems on 4.3L, 5.0L, 5.7L, 7.4L, and 8.2L engines
• Package: Includes 1 Marine MAP Sensor

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below.

Technical Specifications

Package Contents

• 1 × Marine MAP Sensor

Note: This sensor is designed exclusively for marine engine applications.

Installation Guide

1. Disconnect the battery: Ensure the negative terminal is disconnected to prevent electrical shorts during installation.
2. Locate the old MAP sensor: It is typically mounted on the intake manifold or throttle body assembly. Consult your engine manual if needed.
3. Disconnect the electrical connector: Gently press the release tab and pull the connector away from the sensor.
4. Remove vacuum hose (if applicable): Carefully detach any vacuum line connected to the sensor.
5. Unbolt the old sensor: Use the appropriate socket or wrench to remove the mounting bolts or screws.
6. Install the new MAP sensor: Position the replacement sensor and hand-tighten the mounting hardware, then torque to manufacturer specifications.
7. Reconnect vacuum hose: Ensure a secure, leak-free connection.
8. Plug in the electrical connector: Push firmly until you hear or feel a click.
9. Reconnect the battery: Restore power by reconnecting the negative terminal.
10. Start the engine: Allow it to idle and check for any fault codes or warning lights.
11. Inspect for leaks: Verify that all connections are tight and there are no vacuum leaks around the sensor.
12. Test performance: Take the boat for a short test run to confirm smooth operation and proper throttle response.

Troubleshooting & FAQ

Q: How do I confirm this MAP sensor fits my engine?
A: Cross-reference your existing part number (OMC 3850396, Volvo Penta 3850396, or Sierra 18-7684) or verify your engine model and year in the compatibility table above. If your engine is a 4.3L, 5.0L, 5.7L, 7.4L, or 8.2L OMC/Volvo Penta fuel-injected model from the specified years, this sensor should fit.

Q: What are the signs that my MAP sensor is failing?
A: Common symptoms include rough idle, poor fuel economy, hesitation or loss of power under acceleration, black smoke from the exhaust, and engine fault codes related to MAP or manifold pressure readings. If you experience any of these issues, testing or replacing the MAP sensor is a good first step.

Q: Can I use this sensor on an automotive engine?
A: No. This MAP sensor is designed exclusively for marine engines and may have different calibration, connector types, or environmental sealing compared to automotive sensors. Always use marine-specific parts for marine applications.

Q: How often should I replace the MAP sensor?
A: MAP sensors typically do not have a fixed replacement interval and are replaced as needed when they fail or exhibit symptoms. Regular engine diagnostics and monitoring can help identify sensor issues early. If you notice performance problems or fault codes, test the sensor promptly.

Q: Is this an OEM part or an aftermarket replacement?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.