KYO-EI WIDE TREAD SPACER FOR LAND CRUISER M14xP1.5 5525W1

KYO-EI

5525W1

Size: M14 × P1.5
_x000D_ HOLE: 5
_x000D_ PCD: 150
_x000D_ OD mm outer dia .: 189
_x000D_ inner diameter mm inner dia .: 110
_x000D_ Thickness mm thickness: 25
_x000D_ Prise: ¥ 43,000 (excluding tax)
_x000D_ hub bolts of height: 25mm
_x000D_ JAN code: 4965581 806303

Wide tread spacer Land Cruiser 100/200 system dedicated
■ Land Cruiser 100-200 system dedicated design. Integrated wide tread spacer with a hub.
■ adopt an outer diameter φ189mm forged billet material cutting the ultrahard aluminum material.
■ hub bolts are adopted using a chromium-molybdenum steel, hardened, high-strength, high durability of the bolt.
■ reduce blurring at high speeds in integrated with the hub.
■ Number of holes: 5H ■ PCD: 150 ■ Thickness: 25 · 30mm
■ outer diameter: 189 mm ■ inner diameter: 110 mm
■ Nut Size: M14 × P1.5
● wide tread spacer / two 1 set
● Note on accessories / dedicated nut special adapter
mounted
※ the wide tread spacer is the Land Cruiser 100-200 system only. Do not install any other vehicle type.
※ 5HOLE, 70 Prado ('15 .7 ~ '16 .6) reprint, impossible.
● If you have received a strong shock to the tire wheel, takes excessive force to the wide tread spacer, there is a possibility to cause damage and is used as it is, should be removed immediately because it may lead to an accident. In addition, the product should not be used in the absolute.
● by offset or the like of the spacer thickness and the wheel, it might not be mounted to the vehicle (in contact with the projection-tire house than fender). When you purchase, on the confirmation of the current car state, please purchase.
● Before mounting, be sure to rust the mounting surface and the vehicle body hub side of the back side of the wheel with a wire brush or the like, should be installed from drop the dirt.
● body of the hub bolts, spacer of the hub bolts, do not painted with oil or grease on the mounting nut. There is a possibility that the tightened bolt is damaged more than necessary. If you
● on the back side of the body of the hub side and the wheel there is a foreign matter and projections, do not install.
when fitted with a wide tread spacer to the body hub bolts ●, when the bolt is protruding from the spacer, do not install a wide tread spacer. If you
● on the back side of the mounting wheel of "escape" is, it is possible to attach the wide tread spacer. However, the is genuine stud bolt depth of "escape", if there is no depth to fully escape, do not install a wide tread spacer.
● The vehicle of steel wheels do not install absolutely.
● After mounting the wide tread spacer, it is recommended alignment adjustment to prevent uneven wear of the tire.
● attachment, for the failure and damage caused by errors of handling, does not guarantee at all.
● Because of this wide tread spacers parts for the competition, it can not be used in public roads. ● in a vehicle steel wheel Do not install absolutely.
● After mounting the wide tread spacer, it is recommended alignment adjustment to prevent uneven wear of the tire.
● attachment, for the failure and damage caused by errors of handling, does not guarantee at all.
● Because of this wide tread spacers parts for the competition, it can not be used in public roads. ● in a vehicle steel wheel Do not install absolutely.
● After mounting the wide tread spacer, it is recommended alignment adjustment to prevent uneven wear of the tire.
● attachment, for the failure and damage caused by errors of handling, does not guarantee at all.
● Because of this wide tread spacers parts for the competition, it can not be used in public roads.

Images are for illustration purpose only. Actual product may vary.