Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
HC5-XTSD - XT/Perf Street RigidSpecifications: Item Description: XT Perf Street Rigid Product Weight: 10. 5 lbs. Torque Capacity: 295 ft lbs. Torque Capacity Over OE: 82% Disc Material: Organic Clutch Disc Diameter (Inches): 8. 3 inches Clutch Disc Diameter (Millimeters): 212 mm Input Shaft Diameter (inches): 0. 875 inches Pressure Plate Type: Xtreme Warranty: 12 Months Description: The HC5 XTSD kit features an Xtreme pressure plate designed for the most demanding drivers. ACT
Specifications:
- Item Description: XT/Perf Street Rigid
- Product Weight: 10.5 lbs.
- Torque Capacity: 295 ft/lbs.
- Torque Capacity Over OE: 82%
- Disc Material: Organic
- Clutch Disc Diameter (Inches): 8.3 inches
- Clutch Disc Diameter (Millimeters): 212 mm
- Input Shaft Diameter (inches): 0.875 inches
- Pressure Plate Type: Xtreme
- Warranty: 12 Months
Description:
The HC5-XTSD kit features an Xtreme pressure plate designed for the most demanding drivers. ACT Xtreme pressure plates utilize an exclusive diaphragm design to increase clamp load, reduce deflection, and maximize clutch life. Each diaphragm undergoes a four-stage heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. The kit includes ACT's Performance street rigid-hub discs featuring premium organic materials with high copper content for improved heat transfer and steel-backed lining for greater burst strength and durability. The chrome-moly hub is heat-treated for enhanced strength and durability. Rivet design and materials are carefully selected for maximum strength. These discs are the minimum weight street disc for faster shifts. ACT's Street rigid-hub discs offer race-proven performance with street manageability.
Description:
- Feel: Moderate to heavy pedal effort, smooth positive engagement, increased gear rattle
- Life: Longer clutch life achieved through ACT's exclusive diaphragm design, rigid design may increase spline wear
- Quality: Precisely balanced and uses premium organic friction materials for heat tolerance, faster recovery from overheating, and prevents warping of mating surfaces
- Recommended Use: Recommended for street and race use
- ACT Difference: 100% clamp load tested and dynamically computer balanced for smooth high RPM reliability
Vehicle Fitment:
-
Application: Engine
- Various models of Honda Civics and Civic del Sols from 1992 to 2005, including CX, DX, EX, LX, Si, VX, and others.
- 1997-2000 Acura EL Base
- 1997-2004 Honda Civic Value Package, HX, Reverb, and others.
PROP 65 WARNING: This product can expose you to chemicals including carbon black, glass wool fibers, and silica (in clutch discs), chromium, and nickel, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 1181 reviews
Sort
Product Reviews
★★★★★ 4
Works well, but it doesn't come with drywall anchors
Bought it to wall mount my wifi router.
The whole thing is very small, but the straps are very long, so it can support many devices. The straps also get reasonably tight.
Installation is easy, it's nice that it comes with a level.
Annoying that it only comes with six screws, and no drywall anchors. So you either have those, have to go get them, or screw it to a stud (which you probably should do depending on how he heavy the object you want to mount is).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 19, 2025
★★★★★ 5
Clean, sturdy way to mount a cable box/router (easy install)
Used this TotalMount to get my cable box/router off the shelf and tidy up the setup behind the TV. Install was straightforward (screws/anchors included), and the mount feels solid once it’s on the wall. The adjustable fit is the best part—it held my device snug without bending or wobbling, and there’s still enough airflow so it doesn’t feel “choked” in place.
It also helps a lot with cable management since everything stays in one spot instead of hanging or sliding around. Tip: measure your device first and lightly tighten, then do the final snug once it’s centered. Overall, great value if you want a cleaner, more organized setup.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 25, 2026
★★★★★ 5
Used it to hang two routers on the wall
This product was surprisingly good. For my purposes it was better than it needed to be. The drywall screws provided were very easy to use. I attached one side of the mount to a stud but I think for most purposes the drywall screws would have been adequate. I was surprised that they had channels in the plastic for the straps. This certainly made the molds for this product more expensive to make, but it made the straps easier to thread through the mount than if the had just made it so the straps went between the device and the wall. The product had a level. For my purposes it would have been fine without that but it did make it a little easier to install.
I mounted two routers (one was our network router and the other was a router that provided a land line telephone) side by side in this mount. I separated them a bit so as to allow each to cool. It was a nice improvement over having the routers flopping around on a desk and periodically falling on the floor. I gave it five stars overall. It was nicely built, I couldn't see what they could have done better, the price seemed reasonable and it got here in a timely way.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 21, 2021
★★★★★ 5
Easy install and perfect mount for PS3 Slim
I struggled to find a mount for my PS3 slim and as I already have TotalMount's PS4 Slim mount, I had the utmost trust in this one.
Installation is already easy and made easier with the built-in level. Simply hold level and screw/drill in screws. But honestly, one of the best things about this mount are the included screws. Their thick threading ensures that the mount being ripped off or loosened is almost impossible.
As for the quality of the mount holding my PS3 Slim, which isn't exactly light (7 lbs), no complaints. It was pain to set up within the straps as I needed a second set of hands, but it is very secure and I trust it's not going anywhere. But as a tip for anyone installing heavier objects, make sure the adjuster buckles are near the top. Because of the PS3's weight, it unavoidably weighed the straps down so I found that tightening the console near the top secures it in places without gravity playing too much of a role. But I recommend do trying to avoid using this mount for heavier things in general.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021
★★★★★ 3
Excellent For the Price
The mount is much smaller than I had originally thought but that does not really pose a problem as the straps are excessively long allowing for large items. It is very straight forward and easy to install. The plastic buckle on the provided straps are less than impressive as they do not tighten as much as I would like. That having said that I'm not in fear of it falling because each is secure and snug against the console.
If your item is larger than the mount than it will be able to move length-wise as the straps are not connected to the mount but rather you push them through the provided slots. On my next install, I'm going to try using a wedge or clamp that will keep the straps secured to the mount to mitigate this.
The install hardware consist of 6 bear-claw style drywall screws. These are have very poor quality control as 2 of the screws had 1/4in metal shavings attached to them one of which sliced open my finger during install. I was using a simple screwdriver and was being moderately careful as to not damage the plastic. I recommend using anchors that you are more familiar with. Also I will be using washers next time as the holes in the plastic have a small lip in them that the screw is supposed to snug up to and I don't feel as comfortable with it after actually mounting the console. I did a fair amount of tugging on the straps to try and tighten them and was worried I may pull the mount loose.
Over all, I very much like this item. It is very versatile and you cannot beat the price. i will defiantly be buying this again and using my own hardware to mount so that I feel more secure putting expensive items 6 ft off the ground.
Darin
( Electrician, Handyman, Tinkerer)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 28, 2022
recommand products
Cello Puro Steel-X Rover 600 Bottle (Blue) 480 ml
236.50
KVG Nova Wooden Serving Tray 3 Pieces
936.50
HAZEL Stainless Steel Serving Tray Rectangle - 29.5x19x2 cm 1 Unit
333.50
Nouvetta Apricot Borosilicate Printed Glass Bottle 1 Litre
796.50
Cello Puro Steel-X Cooper 600 Bottle (Orange) 600 ml
281.50