SKU: 35757819683

Corner Style Modular Truss Stand 2M wide X 10M deep | 2.5M Tall

$853.65 $948.50
Save 10%
No.2 Bestseller on watersyst.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 13 - Jul 18

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Corner Style Modular Truss Stand 2M wide X 10M deep | 2.5M TallLighting Truss for a floor area of 20 square meters. This Truss Exhibition stand has a width of 2 meters and a depth of 10 meters. It stands 2. 5 meters tall with a total weight of 54. 5KG. For all pre priced 35mm systems in please see the All Truss Pages or go here for Arch style truss systems. System 35 Truss from CokerExpo: Build B2102503B0L0 Define a space with System 35 decorative truss. Hang your banners and branding and secure your lighting

Lighting Truss for a floor area of 20 square meters.

This Truss Exhibition stand has a width of 2 meters and a depth of 10 meters. It stands 2.5 meters tall with a total weight of 54.5KG.

For all pre-priced 35mm systems in please see the All Truss Pages or go here for Arch style truss systems.

System 35 Truss from CokerExpo: Build B2102503B0L0

Define a space with System 35 decorative truss.  Hang your banners and branding and  secure your lighting setup, System 35 Truss is ideal in situations where space is limited but light-duty structural capacity is necessary.  Select your stand as a base for your display and work with us to add all the elements that will make it pop from furniture to lights, banners, dynamic RGB displays, carpet and more.

System 35 Truss Brochure

F23 System 35 Truss has a subtle aesthetic appeal compared to larger systems. System 35 Truss and Gantry is ideal for trade fairs and exhibitions, retail displays, museum exhibits, signage and banners, restaurants, pubs, and clubs. Many combinations of straight lengths, radials and junctions gives you the ability to build your perfect stand. Please reach out for assistance or browse our competitively priced calculated builds to navigate to a stand that meets your price point and budget. Either add direct to basket or use it as a base for your stand - your display means a lot to us and we will be happy to help, just a phone call / email away. We usually respond within the hour!

Components used in this build:

With a foundation in robust aluminium alloy extruded tubes and precision-machined ends, our gantry stands out with minimal deflection and striking aesthetics. Certified by TUV for load-bearing capabilities, our exhibition gantry integrates perfectly with most display systems, epitomising structural excellence for exhibitions, theatrical displays and as an ideal base for lighting.

Extra Legs / Cross Beams Span Table

The table and illustration below shows the size of a 'straight section' between the 'extra' legs and /or 'cross beams' if you have them.

  • If you select to include extra legs on your build, this is the size of the span between each leg taking into account the 500mm joins and 500mm corners.
  • If you don't have extra legs but you have cross beams on your build, it will be the size of the gap/span between the beams.

Straight Sections (mm) between corners / joining pieces
Build Width Section 1 Section 2 Section 3 Section 4
2M 1000 - - -
3M 2000 - - -
4M 1500 1000 - -
5M 2000 1500 - -
6M 2000 2500 - -
7M 2000 1500 1500 -
8M 2000 2000 2000 -
9M 2000 2500 2500 -
10M 2000 2000 2000 1500

Make sure to check out all our Gantry Accessories too!

All of our designs are backed by professional CAD drawings with calculated weight loadings. All Truss can be sprayed to any RAL colour specified.

Need something different? No problem - Get in Touch!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 35757819683

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 778 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Keith McElroy
Charlottesville, US
★★★★★ 5
Everything you need for your robot maintenance
Color: Saros 10r-20/Qrevo Curvx Accessories, Color: Saros 10r-20/Qrevo Curvx Accessories
Automatic floor robots are a great convenience and, at this point, I can't picture our house without one. Being able to turn them on at night and wake up to vacuum and mopped floors is pretty amazing. The problem is that you eventually have to do maintenance on them to keep them running. I guess it's not that much to ask of you since they do go for a long time with only water refills and waste water dumps. It's hard to find kits that are comprehensive enough to cover all the needs, so when I saw this one, I had to pick it up. The kit contains multiples of every consumable on the Roborock (ours is named Mrs. Nesbit). It also comes with a screwdriver and a blade/brush to clean dirt and hair. The small spinning brush is easy to replace, and the only one you need the screwdriver for. The mopping pad functional on the Roborock is one of my favorite features, so having multiple replacements makes this kit very attractive. They simple peel off of the Velcro and lay back the same. The split rollers take a minute to figure out, but you don't need to loosen the screws - they pull right off the U shaped plastic pieces they are attached to, but keep track of which goes with which color because each plastic piece only goes back on its correct side. The easiest to replace is the filter on the dust bin in the robot since it just pops out and the new one fits in. The lasts step is to replace the dust bag in the base itself, which is very simple. Overall, the quality and fit of all the pieces included in this kit were great. I didn't run across anything that was off or I had to force on. While my pads and brushes weren't as bad as my other vacuum (named The Beast), the vacuum had been warning me that their life was coming to an end and I needed to swap them out. Now I have multiple replacements for the future and my Roborock is good to go for many months. I will be picking this kit up again when I run out and wouldn't hesitate to recommend it at this price point.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026
N
Nancy
Lexington, US
★★★★★ 4
Good Budget Replacement Set, but Mop Pads Differ from Original
Color: Saros 10r-20/Qrevo Curvx Accessories
These replacement accessories fit my Roborock Qrevo S5 without any issues. I run my robot daily because I have a dog, so I go through mop pads pretty quickly and have already used this set for a couple of cleaning runs around the house on vinyl floors. The bags seal properly, and I did not notice any loss of suction or performance with the filters compared to the original parts. The biggest difference was the mop pads themselves. They feel noticeably different from the OEM Roborock ones and seem a bit lower in quality. Even so, they still got the job done for normal daily cleaning and handled pet hair and dirt well. Since the original pads also wear out for me after multiple washes, this set still feels like a practical and more affordable alternative overall.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
S
Super Duper
Houston, US
★★★★★ 3
Not as good as the oem accessories
Color: Saros 10r-20/Qrevo Curvx Accessories, Color: Saros 10r-20/Qrevo Curvx Accessories
I have a roborock saros 10r and all of these accessories seem to be compatible and work with my robovac however the quality of them isn’t nearly the same level. The mop pads material are much coarser and less fine than the original. The side brushed bristles weren’t nearly as tightly bound together. The roller brush isn’t as well made. The cleaning performance I think is similar but i suspect they will not last as long as the oem accessories which are just much better made. Over it’s a mix on value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
E
Ed
Bozeman, US
★★★★★ 5
All the parts needed to maintain your Roborock robot, with a great fit and finish.
Color: Saros 10r-20/Qrevo Curvx Accessories, Color: Saros 10r-20/Qrevo Curvx Accessories
This is a great consumable parts replacement package for many Roborock robots. I utilized it for my Saros 10R. The parts all fit great and honestly look and feel just like the OEM parts that came with the robot. Over time, I have purchased new consumable parts for my Saros 10R from various sources, but I think that I will be using this kit in the future. The kit comes with everything one needs to maintain Roborock robots, as outlined in its description. The main brushes are of good quality and fit well. I have found that the main brushes and the filter fit are the hardest things for third-party vendors to duplicate, and these do that well. What I like most is the mop heads. They are of very good quality and may be better than the OEM mop heads. Everything in this kit fits well and mimics the manufacturer's parts closely in both quality and fit. Compared to the cost of Roborock OEM parts, this is a home run.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
E
Emiran
Pawtucket, US
★★★★★ 4
Nice Value Replacement Kit for the Qrevo CurvX, Brushes Slightly Less Dense Than OEM
Color: Saros 10r-20/Qrevo Curvx Accessories, Color: Saros 10r-20/Qrevo Curvx Accessories
All of the included items fit my Roborock Qrevo CurvX nicely, and the material quality is fairly close to the OEM parts. I also liked the quantity of each item included, since it should be quite a while before I need to buy another replacement kit. The only downside I noticed was that the main roller brushes have about 1/4 fewer bristles than the OEM versions, so they don't seem quite as dense. Other than that, everything fits as expected and the kit seems like a solid value for maintaining the CurvX.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026

recommand products

Jameson 6-in Insulated Electrical Combination Pliers with Wire Cutter
55.00
CRAFTSMAN 72-Teeth 3/8-in Drive Quick-Release Flexible Head Ratchet
68.98
Kobalt Ratcheting screwdriver 10-Piece Plastic Handle Ratcheting Multi-Bit Screwdriver Set
11.86
Heavy Duty Metal Tool Box - 11 in. X 6 in. X 5 in.
27.65
Craftsman 12-in-1 Precision Multi-Bit Screwdriver Set
18.80