SKU: 47319382295

DIY Dana 60 Kingpin Crossover Steering Kit

Sale price$171.45 Regular price$190.50
Save 10%

Pay in installments of $47.62 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 21 - Aug 26

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

DIY Dana 60 Kingpin Crossover Steering KitDana 60 kingpin crossover steering kit utilizing hd tie rod ends. This is a DIY kit to switch from the short rearward facing drag link on your Chevy or Dodge or any project running a kingpin dana 60 to build a long left to right drag link. This kit is can be used with your factory tie rod, turning your steering into a crossover steering kit. The taper is the standard GM 1 ton on the axle end. The pitman arm will need reamed for the larger diameter of

Dana 60 kingpin crossover steering kit utilizing hd tie rod ends.

This is a DIY kit to switch from the short rearward facing drag link on your Chevy or Dodge or any project running a kingpin dana 60 to build a long left to right drag link. This kit is can be used with your factory tie rod, turning your steering into a crossover steering kit. The taper is the standard GM 1 ton on the axle end. The pitman arm will need reamed for the larger diameter of the GM tie rod end or will require drilling and  this insert for the pitman arm end

The adjustment is easier because we add Hex Head TRE weld bungs so a cresent wrench is your adjustment tool, not a pipe wrench which will scar the tube and if too deep cause a major stress riser. Not to mention what it does to the paint...

These are stronger than stock because we use 1.5" X .25" Wall DOM tubing and the TRE's are much more beefy than stock.

 

You will receive:


1 - 55" of 1.5" X .25" wall DOM tubing
1 RH - 7/8" Hex Head Weld Bungs, 18TPI for Tie Rod Ends
1 LH - 7/8" Hex Head Weld Bungs, 18TPI for Tie Rod Ends
1 RH - 7/8" Jam Nuts, 18TPI for Tie Rod Ends
1 LH - 7/8" Jam Nuts, 18TPI for Tie Rod Ends
1 - GM 1 Ton Tie Rod End (Standard TRE )
1 - GM 1 Ton Tie Rod End (High Angle ES2026R)
1 - Dana 60 High Steer Arms & Hardware (Passenger Side)
4 - Dana 60 High Steer Arm Stud & Cone Nuts


We supply more DOM than you need because it is way too easy to make a mistake in your calculations and you can always cut tube, growing it back is the hard part!

For you dodge, you are going to need a 2 or 4 inch drop pitman to complete this depending on how much lift your truck has. The 2” dropped pitman arm should cover from 2” to 4" lift. The 4” dropped pitman can be from there up and can be combined with a steering block to compensate for even more lift. Your steering box will be removed from your frame, removed from the 4wd adapter plate, and bolted straight back to your frame with no plate a few inches towards the rear of the truck in the factory 2wd location. ( This is an excellent time to add our steering box brace. ) You will need to shorten your steering shaft or get a 2wd connection shaft. (This is the time to look into our built steering boxes including the 3-1/3 turn lock to lock top notch steering box and steering shaft coupler! Huge improvement, far better that the so called “rebuilt” boxes you see advertised even with bright colored paint jobs) 

fab is easy, set your wheels completely straight, center your steering box pitman arm in its travel (not the wheel, it can be adjusted after and someone could have easily installed the shaft to the box incorrectly in the past). 

Loosely install the ends in each arm (Steering and Pitman) after proper modifications to fit, and measure the tube length between the tube adapters (make sure they have some room for adjustment but have plenty of thread engagement)

if you have any less than 4” of lift, and even then, if you are planning on lots of flex and suspension travel for off road, you will likely need a small bend in the crossover drag link.  This should be done with a tubing bender but can be done in a press if careful not to kink the tube. It’s 1/4” wall so that’s heavy enough to comply without too much chance of kinking. 

Weld each end and don’t use too much heat or go too slow, to preserve the threads. 

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 47319382295

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 22 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
D
Verified Purchase
Ditto503
Lowell, US
★★★★★ 5
Protects your mattress from toddler spills!
Size: Full, Size: Full
Writing this after my toddler spilled a ton of water on my bed (a new mattress). I didn't realize what she had done for about 1 minute. By the time I got her off the bed, pulled the sheet off and pulled the mattress protector off, the mattress was still dry! I felt the bottom plastic part of the mattress protector and could feel the coolness of the water, but not dampness. This thing works! Note, I don't know how it would perform if I had left it for a really long time. The protector is also very soft on top, not noisy, and easy to stretch over the mattress. You can kind of see the square shapes of the protector through the sheet, but I personally don't care. It was a great buy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 25, 2026
B
Verified Purchase
Bought this for my husband birthday gift he loves
Waukegan, US
★★★★★ 5
Quality
Size: King
Fits perfectly quality of money,comfortably,
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
M
Verified Purchase
Mark Taylor
Lexington, US
★★★★★ 5
Great fit deep pockets
Size: Queen
Fits a deep queen mattress really well
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2026
J
Verified Purchase
Jean
West Palm Beach, US
★★★★★ 1
Fit
Size: Queen
Would not stay on the bed
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 23, 2026
A
Verified Purchase
Amazon Customer
Grantham, US
★★★★★ 5
Good fit
Size: Queen
Covered the mattress well. It was not noisy. Sheets are wee bit oversized and the the cover helps keep the sheets from sliding around. Kids are older so it’s more for the pets. I do recommend it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2026

recommand products