Libec 75mm ball and flat base video head with a PH-6B, payload 3kg

The  Libec H15 Professional Fluid Head combined with the Libec PH-6B Extendable Pan Handle. This setup forms a high-precision, seventy-five millimeter dual-base fluid head assembly specifically tailored for lightweight camera loads up to a maximum capacity of six point six pounds or three kilograms.

This combination is optimized for compact mirrorless camera configurations, lightweight digital cinema cages, and small handheld broadcast camcorders where precision control is required across multiple production support surfaces.

Core Engineering & Performance Design

1. Hybrid Dual-Base Engineering

The core design benefit of the H15 is its integrated dual-head base bottom. The casing is shaped with a seventy-five millimeter half-ball profile that drops straight into video tripod leg bowls. Simultaneously, the bottom of the casting is completely flat and houses a standard three-eighths inch sixteen female mounting thread. This hybrid profile allows a solo operator to lift the head out of their tripod legs and mount it directly onto flat-base production gear like sliders, small cranes, or table dollies without requiring separate adapter plates.

2. Perfect Continuous Counterbalance

Rather than limiting your balancing options to a small selection of rigid preset positions, the H15 features a continuous internal spring counterbalance mechanism. This system lets you fine-tune the tension to match your camera's exact center of gravity for small payloads up to six point six pounds or three kilograms. An illuminated zero-to-one-hundred scale meter on the back housing tracks your exact spring tension setting. Once dialed in, the camera floats weightlessly and holds its position at any vertical tilt angle without falling forward or snapping back to center.

3. Advanced Multilayered Drag Control

The panning and tilting drag movements are handled inside sealed, multilayered metal modules using premium silicon grease to completely absorb hand tremors and shaky movements. The system provides four independent friction options, which are zero free mode plus three separate stages of increasing fluid torque resistance. This allows you to scale the pan and tilt damping to match your tracking speed or lens focal length smoothly.

4. Extended Mechanical Leverage with the PH-6B

The included Libec PH-6B is a premium telescopic pan handle that replaces basic static handles. Built with an ergonomic rubber grip over a rigid aluminum shaft, it features a knurled compression collar that lets you adjust the handle's length anywhere from eleven point six inches to nineteen point seven inches. Extending the length provides greater physical leverage, which reduces muscle effort when executing slow, high-precision diagonal tracking sweeps with a full three-kilogram camera package.

System Technical Specifications Matrix:

Operational System Tips for the H15 and PH-6B Combo:

💡 The Side-Port Rigging Advantage: The lower stationary base casting of the H15 head houses dedicated one-quarter inch twenty and three-eighths inch sixteen female accessory threads. When mounting small monitors, wireless audio units, or video transmitters, screw your articulating arms straight into these base holes instead of clamping them to your moving camera cage. Because these holes remain completely static during camera tracking, your accessories' weight will not alter the rig's center of gravity or throw off your perfect counterbalance settings during steep tilts.

• Managing Ultra-Light Layouts: Since this head is built for lightweight cameras, an stripped-down mirrorless camera body might occasionally sit below the minimum balancing weight threshold. If the internal spring pushes the camera back to center too aggressively, simply adding a small camera top handle, an on-camera microphone, or a larger battery pack will bring the rig closer to three or four pounds, allowing the continuous spring to operate right in its optimal tracking zone.