Cordless High Pressure Spray Gun Airless Paint Sprayer For 36V Battery

Features: 
HVLP Tech - This sprayer ejects higher-volume airflow with lower pressure, finely atomizing the paint and significantly reducing over-spray, dripping and paint waste. It delivers a much finer finish than paint brush and roller, highly suitable for home, garden & DIY projects on car, door, deck, fence, ceiling, furniture, wall siding, and artwork.
Cordless Paint Sprayer - No worry about the cord is too short to use outside,because Elckner cordless paint sprayers allow you to get rid of the interference of wires when working at height or on a messy job site so that you can work freely and effectively.
Powerful & Rechargeable 18650 Battery - Comes with 9000mAh 18650 Battery and battery charger. The 9000mAh 36V large capacity battery provides 3-hour recharge and allows for 40 mins usage.
Designed with foam pad to avoid leaking.
No worry about clogging - To avoid clogging, our paint sprayer is using the copper nozzle.
3 Spray Patterns - Paint sprayer can be adjusted to 3 different spray patterns: horizontal, vertical and round. Comes with 1.8mm nozzle. We would recommond use with polyurethane, chalk type paint for the 1.8mm nozzle.
ADJUSTABLE FLOW CONTROL - Regulate your paint output by adjusting the flow control knob on the sprayer to get different paint output, suitable for edges, corners and broad interior surfaces of various work and DIY projects.
1000ml Large Container - The 1000ml larger container can save time to work for a long time.

 Specification: 
Power supply: Rechargeable 36V 4.0Ah lithium battery
Battery capacity: 9000mAh
Nozzle Caliber: 1.8mm/0.1in
Paint Spraying Volume: 100-200ML/MIN
Container capacity: 1000mL
Max. Viscosiity: 80 DIN-Secs
Spraying distance: 15-30cm/5.9-11.8"
Spraying length: 20-30cm/7.87-11.81"
Air flow: 160L/Min

 Package Include: 
Wirless paint sprayer with 1.8mm Spray Nozzle
1000 ml Paint Container
2*9000mAh rechargeable battery36V
quick Battery charger
User Manual

 

 Warm Tips: 
Before using, please choose proper nozzle, and check if the cap, container and paint tube have tightened up.
Please add proper paint thinner to dilute the paint and stir to ensure that the paint passes smoothly through the viscosity cup within 60 seconds. We also recommend that testing on cardboard or wooden boards before spraying to see if the effects can meet your requirement.
Please put the corresponding thinner in the container after finishing spraying, then reinstall and perform a similar operation as spraying to properly clean the container and tube.
All parts of the paint sprayer are detachable. Please wash the sprayer gun immediately with the brush and needle(for nozzle).
Suggested spraying distance is 6"-8",the spraying distance should not be too close or too far.