Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Atmel-ICE-C Kit Original PCBA Inside Full Functionality Cost Effective Development Tool for Atmel SAM / AVR MicrocontrollersOverview 1. Atmel ICE C is the cost effective solution for the powerful Atmel ICE, it adopts the original ATMEL ICE PCBA and comes with a durable aluminium alloy enclosure. 2. Atmel ICE C delivers the same functionality and usability just as the ATMEL ICE Full Kit, it is capable of debugging and programming Atmel ARM Cortex M based Atmel SAM and AVR microcontrollers with on chip debug capability. Key Features 1. Support JTAG, SWD, PDI, TPI, aWire, SPI
Overview1. Atmel-ICE-C is the cost effective solution for the powerful Atmel-ICE, it adopts the original ATMEL-ICE-PCBA and comes with a durable aluminium alloy enclosure.
2. Atmel-ICE-C delivers the same functionality and usability just as the ATMEL-ICE Full Kit, it is capable of debugging and programming Atmel ARM Cortex -M based Atmel SAM and AVR microcontrollers with on-chip debug capability.
Key Features
1. Support JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces
2. Full source-level debugging in Atmel Studio
3. Support all built-in hardware breakpoints in the target microcontroller (number depends on the OCD module in the target)
4. Up to 128 software breakpoints
5. 1.62 to 5.5V target operation
6. USB powered
7. Provides both ARM Cortex Debug Connector (10-pin) pin-out and AVR JTAG connector pin-out
Supported Software
1. Support Atmel Studio 6.2 or higher version
2. Directly supports ICC8AVR or higher version
3. Support programming HEX files generated by ICCAVR, CVAVR, IAR, etc.
Supported Devices
1. Programming and on-chip debugging of all Atmel AVR 32-bit MCUs on both JTAG and aWire interfaces
2. Programming and on-chip debugging of all Atmel AVR XMEGA family devices on both JTAG and PDI 2-wire interfaces
3. JTAG and SPI programming and debugging of all Atmel AVR 8-bit MCUs with OCD support on either JTAG or debugWIRE interfaces
4. Programming and debugging of all Atmel SAM ARM Cortex-M based MCUs on both SWD and JTAG interfaces
5. Programming of all Atmel tinyAVR 8-bit MCUs with support for the TPI interface
6. For more details, please visit UC3, Mega, SAM , Tiny, Xmega
Specifications
1. INTERFACE VOLTAGE: 1.62V ~ 5.5V
2. JTAG CLOCK: 32kHz ~ 7.5MHz
3. PDI CLOCK: 32kHz ~ 7.5MHz
4. DEBUGWIRE BAUDRATE: 4kbit/s ~ 0.5Mbit/s
5. AWIRE BAUDRATE: 7.5kbit/s ~ 7Mbit/s
6. SPI CLOCK: 8kHz ~ 5MHz
7. SWD CLOCK: 32kHz ~ 2MHz
8. PC INTERFACE: USB 2.0 high speed
Package list
1. Atmel-ICE-C unit x1
2. USB type A plug to micro B plug cable x1
3. IDC flat cable with 10-pin 50-mil connector and 6-pin 100-mil connector x1
4. Multi-functional adapter board x1
5. 10pin flat cable x1
6. 10pin 100mil squid cable x1
7. 6-pin to 10-pin ISP cable x1
Specification:
| Package Weight |
|
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 2216 reviews
Sort
Product Reviews
★★★★★ 5
Good shelves for the price can be challenging to install correctly
Size: 16 Inch, Color: White, Size: 16 Inch, Color: White
Good quality shelves for the price. Happy with the purchase. They give you assorted hardware to mount each shelf. Wall anchors for masonry or brick and anchors for drywall as well as screws to affix shelf to the wall bracket. The installation was fairly easy but it can be a bit difficult to get the bracket leveled on the wall. The “level” they give you is useless, it is only the tube - not in a housing, so 1 1/2” long. You will need a better level. Basically you place the bracket where you want the shelf to go then make sure it is level and take a pencil to mark the holes. We ended up using a heavier quality wall anchor so only needed 2 anchors instead of the four they send you. Once the bracket is on, slide the shelf onto the bars coming from the bracket and use the 2 set screws to secure it in place. Check for level and if it isn’t you can remove shelf and loosen bracket screws and wiggle the bracket while still attached while retightening screws. We had to re-level one of our shelves this way. Hope this helps and that it makes sense. As for weight capacity I wouldn’t want to put more than a couple of pounds on a shelf. As it is secure, it is hollow inside and too much weight would probably either cause the shelf to sag or damage your wall
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 25, 2025
★★★★★ 5
Excellent product with height recommendation
Size: 24 Inch, Color: White, Size: 24 Inch, Color: White
My bathroom renovation is turning out great. These shelves are beautifully stable and show no visible assembly. The idea of these floating shelves is brilliant.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2026
★★★★★ 5
Beautiful and sturdy
Size: 24 Inch, Color: White
Excellent quality shelves. All hardware came with them and also the stickers to cover the screws. I also placed a plant on one of the shelves and it’s not leaning and again very nice and secure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
★★★★★ 5
Great shelves
Size: 24 Inch, Color: White
Easy to assemble and comes with everything you need for drywall or wood. Nice color and texture and comes with stickers to hide the holes underneath. I bought two sets of three. These are very long, so I recommend just using two at a time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2026
★★★★★ 5
JAXPETY Room Divider Panel 6Ft Privacy Screen Wall Divider 88" W x 73" H - 3 Panel Black
Color: Black, Size: 3-Panel, Color: Black, Size: 3-Panel
I was looking for a screen to use while making video calls. I am on a budget, wanted something easy to put together, and would hide my apt in the background. Being on a budget, I thought my purchase qualified for the coupon. I was mistaken but contacted the seller. I received a quick response explaining how the coupon was applied. I was happy with the quick response and explanation which I verified when I went back to the page.
The once all put together the screens are light weight and fairly easy to move. they do not seem to be made for easy daily breakdown. However, if you should need to take them apart to move or something, easy to break down. Depending on lighting will depend on if you find them transparent. I don't mind possible vague outlines; I was looking so no real details of my belongings in the background could be seen (shelves; figurines; etc.) My apt living room has no overhead light source, so floor lamps give light. In the 3 photos of 2 of the screens put together; the first is with a lamp in front and back of the screen as well as a tv on. The next has the tv off lamps still on and the screen reflecting the pc monitors. The third is with both lamps and the tv off, monitors on but not as reflective.
In the box, you have all the parts you need as well as a small tool and an instruction manual. Item 'bags' are number [though they may come off in the box] to assist with assembly. Now assembly can be easy or hard depending on your abilities and the area you are working in. I have bad knees, so kneeling was not an option for me. My first attempt to put this together, I put the 'feet bases' on while still connecting the top bar. It made it twice as hard, and I stretched the fabric more than was necessary causing wholes around some of the stitching and stretching them a little. As well as causing some stitching to come undone on one of the pictured areas. Once I took off the 'feet bases', I had an easier time to screwing in the top bars. You will still need some hand strength, which I don't have much of, but it is possible. I use the grip things to open pickles jars.
Once the screens were assembled, I followed the instructions of tying an outer screen to the inner screen and using the Velcro 'privacy flaps' to complete the connection. I have what I think is low shag carpeting which they were able to stand stably on once I wiggled them into standing straight up and in place.
Given these post pandemic times, I am overall happy with both the divider and the price. The 2 things I do not like about the divider is the difficulty putting in the top bar [after connecting the top and sides] and storability when not in use issue I am having. Others with larger space will likely not have the last issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2025