Brocade (Formerly) E1MG-100FX-IR Compatible TAA Compliant 100Base-LX SFP Transceiver (SMF, 1310nm, 15km, LC)

Optimize your network infrastructure with a trusted, high-performance 100Base-LX SFP transceiver designed for Brocade environments. This transceiver operates at 1310 nm over single-mode fiber (SMF), delivering reliable, long-reach connectivity for enterprise campuses, data centers, and metro networks. With a maximum reach of 15 kilometers and a low-latency path, it ensures seamless integration between switches, routers, and fiber-enabled devices, while preserving the integrity of your existing fiber optic links. Built to meet or exceed the OEM’s specifications, this module is MSA compliant and TAA compliant, offering a cost-efficient, fully compatible upgrade or replacement option that you can rely on for consistent performance across vendor boundaries. Each unit is 100% tested to guarantee proper operation, reducing the risk of field failures and ensuring predictable network behavior from day one.

• Compatibility and compliance: Specifically engineered to work with Brocade (Formerly) E1MG-100FX-IR environments, this transceiver is designed to slide into existing SFP bays without the need for firmware hacks or bridging adapters. It adheres to Multi-Source Agreement (MSA) standards and is TAA compliant, ensuring seamless procurement and broad cross-vendor interoperability. The part is tested for functional parity with the OEM module, reducing the need for costly OEM-only replacements while maintaining network stability and warranty alignment.
• Optical specifications and reach: This module transmits at 1310 nm over Single-Mode Fiber (SMF), optimized for longer-link deployments. It supports a maximum distance of up to 15 kilometers, enabling robust inter-building connectivity, campus rings, and remote aggregation links. The LC fiber interface supports standard LC duplex connections, delivering a reliable, low-loss optical path for high-quality data transmission with minimal dispersion-related issues over long runs.
• Performance and reliability: As a 100Base-LX SFP, the transceiver delivers 100 Mbps Ethernet over fiber with stable link performance suitable for a wide range of industrial, enterprise, and data-center applications. It is designed, manufactured, and tested to meet OEM specifications, providing dependable operation with stringent quality control. The component-level testing ensures consistent optical performance, power stability, and electrical compatibility with Brocade’s port controllers and management software, helping to minimize downtime and support steady throughput under load.
• Ease of procurement and integration: With TAA and MSA compliance, the module is an attractive drop-in replacement or upgrade option for mixed-vendor networks, global procurement programs, and government contracts. Its standardized form factor and electrical interface mean faster installation, fewer compatibility surprises, and easier inventory management for IT teams, resellers, and integrators who manage diverse fiber infrastructures across locations.
• Cost-effective replacement with guaranteed compatibility: This non-OEM alternative is a compelling choice for network modernization or expansion, delivering the performance you expect from a cost-conscious option. Its compatibility with Brocade E1MG-100FX-IR networks ensures you can preserve existing investments while benefiting from reliable, tested operation and predictable service levels. The module’s 100% functional testing guarantees alignment with your installed hardware, helping protect your service-level agreements and overall uptime.

Technical Details of Brocade (Formerly) E1MG-100FX-IR Compatible 100Base-LX SFP Transceiver

• Data rate: 100 Mbps (100Base-LX) for Ethernet over fiber.
• Wavelength: 1310 nm laser diode optimized for long-reach SMF links.
• Fiber type: Single-Mode Fiber (SMF) to maximize distance and minimize modal dispersion.
• Reach: Up to 15 kilometers, enabling inter-building or campus-scale networks.
• Connector: LC interface for fiber optic connections (typically LC duplex).
• Compliance: MSA-compliant and TAA-compliant, suitable for mixed-vendor deployments and government procurement.
• Compatibility: Compatible with Brocade E1MG-100FX-IR modules and similar 100Base-LX SFP environments, designed to slot into standard SFP ports with no special cabling required.
• Form factor: SFP transceiver module, hot-pluggable in supported switches and routers that accept SFPs (verify vendor guidelines for hot-swap procedures).
• Testing and quality: 100% functional testing to ensure performance parity with OEM specifications and reliable operation in production networks.

How to install Brocade (Formerly) E1MG-100FX-IR Compatible 100Base-LX SFP Transceiver

• Power down the network device or follow your vendor’s hot-swap guidelines to prepare for module replacement. Remove the existing SFP or locate an available SFP slot on the switch or router.
• Insert the SFP transceiver into the SFP port until it seats securely. Ensure the connector is aligned and the module is fully seated to avoid poor contact or misalignment.
• Connect a duplex LC fiber patch cable between the transceiver’s LC port and the corresponding fiber port on the network device, making sure the fiber is clean and the connector ferrules are free of dust.
• Power up the device (if you powered it down) and verify the link status using the device’s management interface or the port LED indicators. Confirm that the port negotiates to 100 Mbps and that the link is stable with minimal error counts.
• Configure the port as needed for your network—enable 100 Mbps operation, set duplex as required (auto-negotiation is common, but static settings may be used in some environments), and run a quick loopback or throughput test to validate end-to-end connectivity.

Frequently asked questions

• Q: What is the data rate of this transceiver? A: It operates at 100 Mbps, using the 100Base-LX standard for Ethernet over fiber.
• Q: What fiber and connector does it use? A: It uses single-mode fiber (SMF) with an LC connector interface, typically LC duplex for 100Base-LX links.
• Q: How far can this transceiver reach? A: It supports a maximum distance of up to 15 kilometers on SMF, enabling long-range connectivity between buildings or across campus networks.
• Q: Is this transceiver compatible with Brocade E1MG-100FX-IR systems? A: Yes. This module is designed to be compatible with the Brocade E1MG-100FX-IR family, offering a dependable replacement option that preserves network performance and stability.
• Q: Is the part MSA and TAA compliant? A: Yes. The transceiver complies with Multi-Source Agreement (MSA) standards and is TAA compliant, making it suitable for cross-vendor deployments and government procurement programs.
• Q: Is the product guaranteed to be 100% functional? A: Yes. The module is manufactured and tested to ensure full functionality and compatibility with OEM specifications, providing predictable performance in production environments.