AMBROSIA ASA-CF Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament

AMBROSIA ASA-CF Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing FilamentThis filament is highly abrasive, we strongly recommend printing with Tungsten Carbide Nozzle like the Undertaker Ambrosia Filament's line of ASA CF filament is derived from 100% Virgin Grade A Non Toxic pellets and long chopped Carbon Fiber. Manufactured to a tighter than standard tolerance (+ 0. 03mm) you'll experience consistent extrusion throughout the spool. Free of additives, this filament prints like butter. Due to the nature of Carbon Fiber

This filament is highly abrasive, we strongly recommend printing with Tungsten Carbide Nozzle like the Undertaker

Ambrosia Filament's line of ASA-CF filament is derived from 100% Virgin Grade-A Non-Toxic pellets and long chopped Carbon Fiber. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. Free of additives, this filament prints like butter.

Due to the nature of Carbon Fiber infused filaments, colors created with CF infill are dark and we are unable to produce bright / neon or fluorescent variants. 

Feed your Printer the Filament of the Gods.

ASA is the natural successor to ABS and is great for both mechanical, functional or decorative parts. It prints well, with less warping than some other filaments, however it is highly encouraged to use an enclosure. A heated bed is required. ASA filament has high strength, impact and weather resistance (including UV), and can withstand higher temperatures than many common filaments (e.g. PLA/PETG). 

Adding chopped Carbon Fiber to ASA increases its stiffness, being both more rigid and offering excellent layer adhesion. Carbon Fiber is both stronger than metal, lighter than plastic, and is heat resistant.

• Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
• Derived from 100% Virgin (Grade-A) non-toxic pellets
• Chopped Carbon Fiber Strands
• Diameter: 1.75mm (+/-0.03mm)
• Filament Net Weight: 1KG
• Spool Weight: 130G

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).

Check out our other lines of Ambrosia Filament!

Ambrosia Filament's Recommended Print Settings for our ASA filament:

Technical Specifications for our ASA-CF Filament:

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Carbon Fiber filaments have increased risk of use and should not be sanded or used without proper equipment. Handle with care, using appropriate tools and protective wear (e.g. gloves) when handling. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.