Electro-Voice HM2 Headworn Condenser Microphone

Electro-Voice HM2 Headworn Condenser MicrophoneThe Electro Voice HM2 headworn microphone is the ideal microphone for anyone who requires high quality vocals in a hands free application. The HM2 is perfect for use by lead vocalists, singing instrumentalists, dancers, aerobic instructors and other presenters. The HM2 has a miniature electret condenser element designed with a cardioid polar pattern, which attenuates background noises such as sound from nearby floor monitors, on stage musical

The Electro-Voice HM2 headworn microphone is the ideal microphone for anyone who requires high-quality vocals in a hands-free application. The HM2 is perfect for use by lead vocalists, singing instrumentalists, dancers, aerobic instructors and other presenters.

The HM2 has a miniature electret condenser element designed with a cardioid polar pattern, which attenuates background noises such as sound from nearby floor monitors, on-stage musical instruments and crowd noise. The furnished open-pore windscreen slips over the microphone element to reduce wind noise and minimize P-popping – the excessive explosive breath noise caused by overemphasized “p” and “t” sounds.

The Electro-Voice HM2 headworn microphone employs a comfortable and inconspicuous behind-the-head headband and flexible boom arm in an attractive Nonreflective black matte finish. The flexible boom, which descends from the right of the headband, is enclosed with protective shrink tubing to shield the boom arm from deterioration and to prevent the flexible tube from catching on facial hair. The facial features of the performer or speaker will not be obstructed due to the HM2’s unobtrusive design. The headband and microphone boom adjust to fit any performer or speaker.

The HM2 is designed to have a frequency response similar to a handheld vocal microphone. The HM2 headset exhibits bass- boost (proximity-effect) warmth that many vocalists prefer. The amount of proximity effect can be adjusted by moving the microphone element closer or farther away from the mouth. The HM2 is permanently connected to a 1.2-m (4 ft) shielded cable terminated with a miniature Switchcraft TA3F connector.

Features

• Lightweight – 0.9 oz (25 gm), less cable  
• Behind-the-head headband is comfortable and stays in place
• Cardioid pattern for good gain-before-feedback 
• Frequency response and proximity effect equivalent to handheld vocal mics 
• TA4F connector is compatible  with all EV bodypack transmitters

Specifications

• Generating Element - Electret Condenser
• Frequency Response (1/2-in. distance) - 30-18,000 Hz
• Sensitivity (open circuit voltage at 1000 Hz) - 4 mV/Pascal (680Ω load)
• Polar Pattern - Cardioid
• Maximum SPL, 1% Distortion - 120 dB
• Power Requirements - 1 to 10 V dc
• Operating Current at 9 V dc - 500 μA max
• Finish - Nonreflective black
• Output Cable - 1.2 m (4 ft) long, 2.5 mm (0.10 in.) diameter; miniature audio cable permanently attached between microphone and connector
• Output Connector - Switchcraft TA4F (pin 1 shield, pin 2 & 4 bias/audio, pin 3 N/C)
• Accessories Furnished - Black windscreen
• Optional Accessories - Replacement windscreen EV part no. 879155
• Dimensions, Headband - 140 mm (5.5 in.) nominal at widest point: 160 mm (6 in.) boom arm
• Dimensions, Microphone - 29 mm (1.14 in.) long, 18 mm (0.7 in.) wide, 16.8 mm (0.66 in.) deep
• Net Weight (less cable and connector) - 25 grams (0.9 oz)