Shure SLXD4Q+ Quad-Channel Digital Wireless Receiver - G57

Shure SLXD4Q+ Quad-Channel Digital Wireless Receiver - G57The SLXD4Q+ is a quad channel digital receiver for use with SLX D transmitters. With the crystal clear audio and rock steady RF that SLX D provides, the SLXD4Q+ features a wide 138 MHz tuning range and easily pair with SLX D bodypack, handheld and plug on transmitters. Use audio output summing to set and manage wireless output levels and use RF cascading to quickly scale up compact and powerful multi channel wireless systems for every application.

The SLXD4Q+ is a quad channel digital receiver for use with SLX-D transmitters. With the crystal-clear audio and rock-steady RF that SLX-D provides, the SLXD4Q+ features a wide 138 MHz tuning range and easily pair with SLX-D bodypack, handheld and plug-on transmitters. Use audio output summing to set and manage wireless output levels and use RF cascading to quickly scale up compact and powerful multi-channel wireless systems for every application. SLXDQ4+ Quad Channel receivers four channels of wireless versatility, wherever required.

Features

• Four channels in one rack space
• Wide 138 MHz tuning range
• 32 available channels per frequency band (region dependent)
• Transparent 24-bit digital audio
• Extended 20 Hz to 20 kHz frequency range (microphone dependent)
• 118 dB dynamic range
• Audio Summing matches receiver output to available mixer channels (4,3,2 or 1)
• RF Cascade creates an 8-channel system by linking two SLXD4Q+, no other accessories required
• Bias Voltage power supply management
• Digital predictive switching diversity
• Easy pairing of transmitters and receivers over IR scan and sync
• 4 XLR and 4 1/4" outputs and 2 local ethernet connections
• Compatible with Shure Wireless Workbench control software
• Rugged metal construction
  

Specifications

• Dimensions (H W D): 1.65 x 15.47 x 5.98 in. (42 x 393 x 152 mm)
• Weight: 1750 g (without antennas)
• Housing: Galvanized Steel
• Power Requirements: 15 V @ 0.9

RF Input

• Spurious Rejection: 75 dB (Typical)
• Connector Type: BNC
• Impedance: 50 Ω
• Bias Voltage: 15 V DC, 150 mA maximum, per antenna (switchable on-off)

Audio Output

• Audio Frequency Response: 20 Hz 20 kHz (+1, -2 dB)
• Gain Adjustment Range: 18 to +42 dB in 1 dB steps
• Configuration:
• 1/4" (6.35 mm): Balanced
• (Tip=audio +, Ring=audio, Sleeve=ground)
• XLR: Balanced
• (1=ground, 2=audio +, 3=audio )
• Impedance:
• 1/4" (6.35 mm): 1.1 kΩ (550 Ω Unbalanced)
• XLR (line): 500 Ω (250 Ω Unbalanced)
• XLR (mic): 150 Ω
• Full Scale Output:
• 1/4" (6.35 mm): +12 dBV Unbalanced
• (+18 dBV Balanced)
• XLR (LINE setting): +18 dBV
• XLR (MIC setting): 12 dBV
• Mic/Line Switch: 30 dB pad
• Phantom Power Protection:
• 1/4" (6.35 mm): Yes
• XLR: Yes

Cascade Output

• Connector Type: BNC
• Note: For connection of one additional receiver in the same band
• Configuration: Unbalanced
• Impedance: 50Ω
• Insertion Gain: 0-2 dB, typical

Networking

• Network Interface: 20 Hz 20 kHz (+1, -2 dB)
• Network Addressing Capability: DHCP or Manual IP address
• Maximum Cable Length: 100 m (328 ft)