Hanwha Techwin TER-F01 Ethernet Repeater with 60 W Pass-Through PoE

The TER-F01 Ethernet Repeater from Hanwha Techwin is engineered to dramatically extend your PoE-enabled network beyond the conventional 100-meter limit. By combining a robust signal repeater with a 60 W pass-through PoE capability, this device delivers a cost-effective solution for placing IP cameras, wireless access points, and other PoE-powered equipment farther from the central switch. Whether you’re upgrading a surveillance setup, expanding a campus network, or tackling challenging industrial deployments, the TER-F01 helps you reach farther with fewer cables and less complexity. Its straightforward, plug-and-play design keeps installation simple, while its PoE passthrough capacity ensures downstream devices can be powered without additional power supplies, reducing clutter and total cost of ownership.

• Extends Ethernet reach beyond the standard 100 meters to up to 200 meters (656 feet) using a single TER-F01, enabling long cable runs for IP cameras, access points, and other PoE devices without sacrificing signal quality.
• Supports 10/100 Mbps Ethernet and delivers up to 60 W of pass-through PoE, allowing downstream PoE devices to be powered directly from the upstream PoE source without extra power bricks or adapters.
• Plug-and-play installation with no complex configuration required; a compact, durable design makes it ideal for in-wall, cabinet, or outdoor deployments where space and protection matter.
• Cascade-ready design that supports chaining multiple TER-F01 units to extend reach even further, provided that you observe PoE budget and network performance considerations for your specific environment.
• Tailored for security, networking, and enterprise deployments where reliable data transmission and PoE power delivery are critical—perfect for IP cameras, wireless APs, POS systems, and other PoE-powered equipment in challenging layouts.

Technical Details of Hanwha Techwin TER-F01

• Standard: 10/100 Mbps Ethernet
• PoE Pass-Through: Up to 60 W
• Maximum Extension: Up to 200 meters (656 feet) beyond the standard 100-meter limit
• Topology: Ethernet repeater with PoE passthrough
• Power Source: Powered by upstream PoE; no separate power supply required for the TER-F01 itself

How to install Hanwha Techwin TER-F01

Step 1: Identify a suitable location along the PoE network path where the TER-F01 can be mounted or placed with minimal interference. Ensure both ends of the link have PoE capability and that the environment supports reliable cable performance (shielded cables in industrial settings, proper cabling standards, and adequate ventilation).

Step 2: Connect the upstream PoE-enabled switch or injector to the TER-F01's input port using a standard Ethernet cable. This supplies data and power to the repeater from the PoE source.

Step 3: Connect the downstream PoE-powered device(s)—such as an IP camera or wireless access point—to the TER-F01's pass-through/output port. The TER-F01 passes both data and PoE power to the connected device.

Step 4: Verify link status and power indicators on both the TER-F01 and the connected device. Confirm that data connectivity is stable and that the downstream device is receiving power.

Step 5: If your deployment requires longer distances, you can cascade additional TER-F01 units in series. Plan your topology to balance distance, PoE budget, and network latency, and ensure that the total cable length does not create excessive delay or signal degradation for your application.

Step 6: Perform a final site survey, including cable integrity checks, environmental considerations, and security requirements. Maintain clear labeling and documentation for future maintenance or expansion.

Frequently asked questions

• What is the TER-F01? The TER-F01 is an Ethernet repeater with 60 W pass-through PoE designed to extend 10/100 Mbps Ethernet networks beyond the standard 100-meter limit while delivering PoE power to downstream devices.
• What does pass-through PoE mean? Pass-through PoE means the device can receive power from a PoE-enabled source and pass that power through to a downstream PoE-powered device, enabling both data transmission and power delivery over extended cable runs.
• What is the maximum extension distance? A single TER-F01 can extend the link up to 200 meters (656 feet) beyond the standard 100-meter Ethernet limit. The total distance in a multi-unit cascade depends on cable quality, PoE budget, and network requirements.
• Do I need an external power supply? No external power supply is required for the TER-F01 itself. It is powered via the upstream PoE source, and it provides PoE power to the downstream device(s).
• Is it compatible with non-PoE devices? The TER-F01 operates on 10/100 Mbps Ethernet and can carry data to non-PoE devices. However, powering downstream devices requires PoE-compatible equipment and a PoE-enabled upstream source.