4"x40" | Full-Fit | Heat-Sanitizable | 2,400 GPD | FilmTec RO

DOW FILMTEC™ HSRO-4040-FF Heat-Sanitizable Full-Fit RO Elements

DOW FILMTEC™ HSRO-4040-FF Elements are heat-sanitizable reverse osmosis elements that deliver outstanding quality water with the added capability to withstand sanitization with hot water, eliminating the need for chemical sanitizers. The full-fit configuration minimizes stagnant areas and is optimal for applications requiring a sanitary design. All materials of construction are compliant with U. S. Food & Drug Administration indirect food contact requirements and are suitable for use in food processing applications.

Each HSRO-4040-FF element is supplied with two end caps (part number 102109).

DOW FILMTEC HSRO-4040-FF is FDA – 21 CFR 177.2550; Food and Drug Administration Compliant.

Benefits of DOW Full-Fit RO Elements:

• Heat Sanitizable
• High flux results in high yields
• Full-Fit Sanitary-Grade Design
• Consistant FilmTec performance and quality from automated rolling

Specifications for HSRO-4040-FF

Permeate flow and salt rejection based: 32,000 ppm NaCl feed stream, 5ppm boron, 77°F, 8% recovery, 800 psig, pH 8.

Operating Limits for HSRO-4040-FF

*Maximum temperature for continuous operation above pH 10 is 95ºF (35ºC).
**Refer to Cleaning Guidelines.
***Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, DOW FILMTEC recommends removing residual free chlorine by pretreatment prior to membrane exposure.