Wulf Mods Flow Auto Flow 510 Voltage Battery

The Flow is equipped with a 500mAh battery and offers five adjustable voltage settings (1.8V, 2.4V, 2.8V, 3.4V, and 3.8V), allowing you to customize your cloud intensity. Designed for convenience on the go, it features a sturdy aluminum alloy body with a sleek, matte finish for a comfortable grip. Available in five stylish colors, the Flow combines durability with a modern aesthetic.

Loading a Cartridge into the Flow

To get started with your Flow, choose a 510-threaded cartridge of your choice. Next, remove the magnetic base of the Flow and use the threaded connection port to securely attach the cartridge. Turn it until it sits flush with the base, ensuring it's snug but not over-tightened.

Operating the Flow

To power on your Flow, quickly press the base power button five times in succession. If done correctly, the top LED light will illuminate, indicating the current temperature setting by color. When you're finished, press the power button five more times to turn off the device.

Using Auto-Draw Mode

To begin vaping with your Flow, simply inhale from the mouthpiece—no buttons required. The device will automatically activate, drawing vapor from your cartridge for a seamless experience. Once you stop inhaling, the Flow will instantly stop heating your cartridge.

Using Auto-Flow Mode

To activate Auto-Flow Mode, simply flip up the mouthpiece and relax as your Flow releases a continuous 10-second stream of premium vapor. Once the session ends, the device will automatically stop producing clouds. To start another Auto-Flow session, lower the mouthpiece and raise it again to repeat the process.

Adjusting the Flow’s Temperature

To switch between the five voltage settings, press the power button on the base once. Each press cycles to the next voltage level and changes the LED color accordingly:

• Yellow – 1.8V
• Purple – 2.4V
• Green – 2.8V
• Blue – 3.4V
• Red – 3.8V

Pre-Heating The Flow

To preheat the Flow, press the power button 2x in a row. When done successfully the LED light will slowly switch between all of the colors to indicate that your cartridge is preheating. Once the preheat is over the LED will turn off and you are ready to enjoy your super charged vapor.

Charging the Flow

To charge your Flow Auto-Flow 510 Voltage Battery, connect it to a USB-C port located at the bottom of the device. For the first charge, leave it plugged in for a full 2 hours. After that, avoid charging for more than  1 hour at a time to prevent short circuits and potential battery issues.

What's Included:

• (1) Wulf Mods Flow Auto-Flow 510 Voltage Battery

Important Warnings:

• Do not charge with a power bank of 5V or higher.
• Do not charge the device in your car.
• Avoid overcharging to prevent battery damage and internal system failure.
• If the device becomes too hot during use, allow it to cool before resuming.
• Do not use the device while it is charging.