SmartAVI DVX-200-Pro: DVI-D CAT6 STP Extender with Reclocking

The DVX-200-Pro from SmartAVI is a high-performance, single-link DVI-D extender designed to push pristine digital video across long cable runs. Engineered for demanding AV setups, this CAT6 STP extender uses advanced reclocking to restore timing and signal integrity, ensuring crisp 1080p imagery far from the source. Perfect for classrooms, conference rooms, control centers, and digital signage installations, the DVX-200-Pro delivers reliable video extension without compromise, even in environments with workflow demands and layout constraints. With a compact transmitter/receiver pair and shielded CAT6 cabling, you gain flexible placement of displays while maintaining the high-quality DVI-D signal you expect from modern digital displays.

• Long-distance DVI-D extension up to 250 feet (76 meters) over CAT6 shielded twisted pair (STP) cables, enabling centralized video sources to drive distant displays with ease and reliability.
• Reclocking technology built into the link to refresh the digital signal, preserving sharp edges, accurate color, and consistent timing across the extended run—minimizing artifacting and jitter often seen in long cable installations.
• Single-link DVI-D support delivering high-definition video up to 1080p (1920x1080) and compatible resolutions close to 1920x1200, ensuring compatibility with most PC and workstation outputs and standard displays without downscaling.
• Simple, dual-unit design (transmitter and receiver) that creates a clean, plug-and-play extension path between your video source and display, reducing wiring complexity and enabling flexible room layouts.
• EMI-resilient performance thanks to STP cabling and robust enclosure design, making the DVX-200-Pro a dependable choice for environments with electrical noise, long runs, and professional AV deployments.

Technical Details of SmartAVI DVX-200-Pro

• Distance extension: DVI-D signal extended up to 250 feet (76 meters) over CAT6 STP cabling
• Video support: Single-link DVI-D resolutions up to 1920x1200 and 1080p (1920x1080) at standard refresh rates
• Signal integrity: Reclocking technology to restore timing and voltage levels across extended runs
• Audio: DVI-D extension carries video only; audio is not transmitted by this extender
• Configuration: Transmitter input connects to the DVI-D source; receiver output connects to the display; a CAT6 STP link completes the path
• Enclosures and cabling: Shielded design optimized for professional AV environments; recommended use with shielded network cables to maintain performance

How to install SmartAVI DVX-200-Pro

• Power off your DVI-D source and display before making connections to prevent any damage or signal glitches during setup.
• Connect the DVI-D output from your video source to the transmitter’s DVI-D input using a standard DVI-D cable.
• Run a CAT6 STP cable from the transmitter to the receiver, taking care to minimize sharp bends and EMI sources along the path for optimal signal integrity.
• Connect the DVI-D output from the receiver to your display using another DVI-D cable; ensure the display is configured to receive the correct input source.
• Power the transmitter and receiver per the manufacturer’s instructions, then power on the source and display. Verify that the display shows a clear, stable image at the expected resolution.
• If you encounter any image issues, double-check cable quality and shielding, verify the link length remains within the 250 ft maximum, and confirm that the displays and source support the intended resolution and refresh rate.

Frequently asked questions

• Q: What is the maximum distance the DVX-200-Pro can extend DVI-D signals?
• A: The DVX-200-Pro extends DVI-D signals up to 250 feet (approximately 76 meters) when using CAT6 STP cabling, making it suitable for large rooms and multi-display installations.
• Q: Does this extender carry audio along with video?
• A: No. The DVX-200-Pro transmits DVI-D video only; it does not pass audio streams through the extender. If audio is required, use a separate audio connection between the source and display or a different path designed for audio.
• Q: Which resolutions are supported by the DVX-200-Pro?
• A: It supports single-link DVI-D resolutions up to 1920x1200 and 1080p (1920x1080) at standard refresh rates. For best results, ensure both the source and display are compatible with these resolutions and that the content is within spec.
• Q: What type of cables should I use?
• A: Use shielded CAT6 (STP) cables for the extender path to minimize interference and maintain signal integrity over the extended distance. Unshielded cables may work in some environments but shielded cabling is recommended for professional deployments.
• Q: Is setup plug-and-play, or do I need additional configuration?
• A: The DVX-200-Pro is designed for straightforward installation with transmitter and receiver paired for a direct DVI-D extension. In most cases, no advanced configuration is required beyond ensuring proper cabling and power per the manual.