4 fader 100mm with preset buttons - ABS

4 fader 100mm with preset buttons - ABSUSB MIDI and DIN MIDI Controller with 4 Faders, Detachable Type C USB connection a standard 2m Type C to Type A USB cable included, The fader travel is 100mm. Box dimensions are 170mm x 120 mm x 35mm (40mm with rubber feet) When a fader is moved the display shows the output CC value. The CC number, MIDI Channel and RANGE of the faders can be changed by using the display and small button located on the USB side of the box no extra software is needed.

USB MIDI and DIN MIDI Controller with 4 Faders,
Detachable Type-C USB connection
a standard 2m Type-C to Type-A USB cable included,
The fader travel is 100mm.
Box dimensions are 170mm x 120 mm x 35mm
(40mm with rubber feet)

When a fader is moved the display shows the output CC value. The CC number, MIDI Channel and RANGE of the faders can be changed by using the display and small button located on the USB side of the box no extra software is needed.

There are 5 presets each store the 4 fader cc numbers and range, totalling 20 fader presets (4x5)
Changes made to a preset are automaticity stored and remembered when powered off.
The two buttons next to the LED display are used to change the pre-set/bank left button decrease right button to increase.

Each Fader can also be set to a different channel allowing the control of multiple devices
The controller can use both USB and DIN MIDI at the same time allowing you to control DAW software with a fader and a hardware device with another.

The USB Cable is also needed to power the unit when only using the DIN MIDI socket and needs to be plugged into a USB port/hub or plug socket (phone charger plug).

Can be used to control Ableton Live and other DAW software that allows MIDI learn/mapping, and also any device that uses USB MIDI CC.
(please refer to the manual of your device for the CC numbers).

USB MIDI will not work with the Windows version of VirtualDJ you will need to use 5 pin Din MIDI.