Pay in installments of $34.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 16 - Aug 21
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Tascam TM-2X Stereo XY Condenser DSLR MicrophoneThe TM 2X Stereo XY Condenser DSLR Microphone from Tascam is designed to record stereo audio directly to your DSLR camera's microphone input. It can be mounted directly on your camera's hot shoe mount and is capable of being swiveled 180 degrees. The TM 2X has two switchable sensitivities, allowing it to work with a range of cameras. As it is powered by plug in power from your camera, it requires no external batteries for operation. A low cut filter
The TM-2X Stereo XY Condenser DSLR Microphone from Tascam is designed to record stereo audio directly to your DSLR camera's microphone input. It can be mounted directly on your camera's hot shoe mount and is capable of being swiveled 180-degrees. The TM-2X has two switchable sensitivities, allowing it to work with a range of cameras. As it is powered by plug-in power from your camera, it requires no external batteries for operation.
A low-cut filter at 130Hz allows you to eliminate low-frequency rumble while the included noise isolation arm helps prevent the mic from picking up mechanical noise from your DSLR. For outdoor filming, a fur windscreen is included to help reduce wind noise. The TM-2X can handle SPL up to 120dB, allowing it to be used on a variety of sources.
-
- Can be mounted directly to the camera accessory shoe and swiveled by 180 degrees to capture sound sources in front or behind the user
- Tripod attachment screw-hole (1/4-inch) allows for optional tripod to place the microphone apart from the camera
- XY orientation for stereo definition and minimal phase differences
- Accepts sound pressure levels up to 125 dB SPL
- Switchable input sensitivity for functionality with most camera models
- Switchable low-cut filter to minimize unwanted low-frequency noise
- Operates with plug-in power from your camera - no battery required
- Included noise isolation arm reduces possible noise being recorded from the camera's lens or stabilizer mechanisms
- Included fur windscreen reduces wind and environmental noise
Type Condenser Polar Pattern Cardioid Frequency Response 50 Hz to 20 kHz Maximum Input Level 120 dB SPL (@ 1 kHz with sensitivity set to H and low-cut filter set to FLAT) Output Impedance 1.6 kΩ (RL = 2.2 kΩ, Vcc = 2.5 V ) Signal to Noise Ratio 74 dB typical (RL = 2.2 kΩ, Vcc = 2.5 V ) Sensitivity H Setting: −37 dB (1 kHz, 0 dB = 1 V/Pa), (RL = 2.2 kΩ, Vcc = 2.5 V )
L Setting: −52 dB (1 kHz, 0 dB = 1 V/Pa), (RL = 2.2 kΩ, Vcc = 2.5 V )Low Cut Filters 130 Hz (RL = 2.2 kΩ, Vcc = 2.5 V ) Cable Length 13" (33 cm) Connector 1/8" (3.5 mm) TRS stereo mini plug (Tip: left channel, Ring: right channel, Sleeve: ground) Power Requirement Plug-in power (JEITA standard CP-1203A) Operating Temperature Range 41 to 95°F (5 to 35°C) Dimensions (WxHxD) 2.2 x 2.3 x 2.7" (57 x 59 x 69 mm), excluding cable and accessories) Weight 2.6 oz (75.0 g)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy