Milwaukee PH56 PRO Waterproof 2-in-1 pH/Temp Tester with Replaceable Probe

Milwaukee PH56 PRO Waterproof 2-in-1 pH/Temp Tester with Replaceable ProbeMilwaukee PH56 PRO Waterproof 2 in 1 pH Temp Tester with Replaceable Probe The Milwaukee pH56 PRO pH and Temperature Tester is their most accurate tester. A large dual level LCD screen makes reading results easy while a stability indicator and hold function that freezes the display takes the guess work out. The PH56 PRO tester is accurate to 0. 05 pH and 0. 5 C 1. 0 F for temperature. With automatic calibration and 6 calibration points in memory, the

Milwaukee PH56 PRO Waterproof 2-in-1 pH/Temp Tester with Replaceable Probe

The Milwaukee pH56 PRO pH and Temperature Tester is their most accurate tester.  A large dual level LCD screen makes reading results easy while a stability indicator and hold function that freezes the display takes the guess work out.

The PH56 PRO tester is accurate to ±0.05 pH and ±0.5 C / ±1.0 F for temperature.  With automatic calibration and 6 calibration points in memory, the tester can be quickly and easily be calibrated to a higher accuracy compared with manual calibration.

The PH56 is fully waterproof to IP67 and at just 3.5 ounces, the PH56 PRO is easy to handle at up to half the weight of other testers. It also comes with the ability to easily replace the probe for years of use.

 Features:

• Fast easy to read results with large digital dual LCD readout
• Extreme pH accuracy to ±0.05 pH with an extended pH range (-2.00 pH to 16.00 pH)
• Lightweight and portable
• Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading
• Simple push button, automatic one or two-point calibration with 6 saved calibration points
• Gel-filled, double junction pH electrode for low maintenance and high performance
• Auto shut off and low power demand for a 300-hour extended battery life (batteries included)

 Specifications:

• pH Range: -2.00 to 16.00 pH
• Temp Range: -5.0 to 60.0°C / 23.0 to 140.0°F
• pH Resolution: 0.01 pH
• Temp Resolution: 0.1°C / 0.1°F
• pH Accuracy: ±0.05 pH
• Temp Accuracy: ±0.5°C / ±1°F
• pH: Typical EMC Deviation ±0.02 pH
• Temp: Typical EMC Deviation ±0.3°C / ±0.6°F
• Calibration automatic, 1 or 2 points with 2 sets of memorized buffers (pH 4.01, 7.01, 10.01 or 4.01, 6.86, 9.18)
• Temperature Compensation: Automatic from -5 to 60°C
• Probe: Replaceable double junction for extended life (Mi56P)
• Environment: -5 to 50°C / 32 to 122°F; max RH 100%
• Battery Type: 4 x 1.5V; IEC LR44, A76 (included)
• Battery Life: Approx. 300 hours of use
• Auto-off: After 8 minutes of non-use
• Dimensions: 7.9 inches × 1.5 inches (diameter)
• Weight: 3.5 ounce

Milwaukee PH56 Manual

CARE AND USE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Tester will give you fast, accurate results for longer.

You can extend the life of your pH electrode in the following ways:

1. Always store with the cap full of buffer or storage solution MA9015, not water.
2. Clean your tester regularly by soaking in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
4. Gently stir the tester in the sample for a faster result.