Blustream NPA20ANA Analog Audio Networked Power Amplifier

Blustream NPA20ANA Analog Audio Networked Power AmplifierThe Blustream NPA20ANA Analog Audio Networked Power Amplifier supports two 10W audio outputs for stereo or a single 20W mono output at 4 or 8 ohms with a two channel balanced unbalanced analogue audio input. Power the unit via PoE or PoE+ from a compatible network switch, or by using an optional dedicated 24 VDC power supply. It features a 31 band DSP with EQ, and audio delay capabilities for lip sync correction with any associated video within the

The Blustream NPA20ANA Analog Audio Networked Power Amplifier supports two 10W audio outputs for stereo or a single 20W mono output at 4 or 8 ohms with a two-channel balanced/unbalanced analogue audio input. Power the unit via PoE or PoE+ from a compatible network switch, or by using an optional dedicated 24 VDC power supply. It features a 31 band DSP with EQ, and audio delay capabilities for lip sync correction with any associated video within the zone. Ideal for dedicated audio delivery in smaller areas (such as bedrooms or en-suites) where larger amplifiers would be considered cumbersome and intrusive.

• Advanced network audio amplifier with balanced / unbalanced analogue audio input
• Supports 2 x 10W @ 4 / 8 ohm, 1 x 20W @ 4 / 8 ohm
• Supports power via PoE+ on LAN connection or local power supply (Amp power is limited when using PoE / PoE+)
• 2 ch balanced / unbalanced audio in and out with master / slave amp control feature allowing daisy chain of up to 4 x NPA20ANA amplifiers
• DSP with 31 band EQ with +3/-10 dB and audio delay
• Local 0V / 5~12V input trigger for automated power control
• Control via front-panel buttons, RS-232 and IP
• Auto standby mode with signal sensing
• Built-in web-GUI for setup and control

Features

• 2 x 10W or 1 x 20W Mono Audio Output
• 2-Channel Balanced/Unbalanced Input
• Supports PoE or PoE+ from Network Switch
• 31 Band DSP with EQ, and Audio Delay

Specifications