Pay in installments of $38.40 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 13 - Aug 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Platinum Tools ezEX44 - ezEX-RJ45 Cat6 ConnectorThe Platinum Tools ezEX44 is a purpose built RJ45 Cat6 connector engineered to deliver faster, more accurate terminations with less guesswork. This patented design features an integrated Hi Lo stagger load bar and a front end pass through that allows the largest conductors to slide through before termination, giving technicians a clear view of wiring order and the ability to verify the sequence prior to crimping. Built for Cat6 cablingwhile offering
The Platinum Tools ezEX44 is a purpose-built RJ45 Cat6 connector engineered to deliver faster, more accurate terminations with less guesswork. This patented design features an integrated Hi-Lo stagger load bar and a front-end pass-through that allows the largest conductors to slide through before termination, giving technicians a clear view of wiring order and the ability to verify the sequence prior to crimping. Built for Cat6 cabling—while offering compatibility with smaller Cat6A configurations—the ezEX44 blends precision engineering with practical, installer-friendly benefits. It’s the kind of connector that reduces rework, streamlines installs, and helps you achieve clean, dependable network runs in both residential and professional environments.
- Patented integrated Hi-Lo stagger load bar ensures precise conductor alignment and consistent termination results. The staggered arrangement helps minimize crosstalk and maintains the performance standards required by modern gigabit networks, making it easier to achieve compliant, repeatable results across multiple terminations.
- Front-end pass-through for big conductors allows large conductors to pass through the front of the connector before termination. This unique capability means technicians can visually verify the wiring sequence before crimping, dramatically reducing miswiring errors and the need for costly re-terminations on the job.
- Optimized for Cat6 cabling with compatibility considerations for small Cat6A runs, the ezEX44 is designed to handle the thicker conductors and tighter twists typical of modern Cat6 installations, ensuring reliable performance for high-speed Ethernet links up to category standards.
- Easy to verify and terminate The combination of the load bar, pass-through front end, and a user-friendly termination process supports quick verification, straightforward seating, and repeatable results that help technicians stay productive on busy job sites.
- Professional-grade reliability Built for professional networks and demanding environments, the ezEX44 delivers solid mechanical performance, durable construction, and compatibility with standard RJ45 terminations, enabling professional installers to deliver consistent outcomes with confidence.
Technical Details of Platinum Tools ezEX44
- Connector type: ezEX-RJ45 Cat6 connector with integrated Hi-Lo stagger load bar
- cabling compatibility: Cat6 (with suitability for smaller Cat6A applications in certain installations)
- Termination features: front-end pass-through to accommodate larger conductors and enable pre-termination wire-sequence verification
- Materials: high-quality housing designed for durability and reliable contact performance
- Contact design: standard RJ45 contact geometry designed for consistent crimping results and dependable signal integrity
How to install Platinum Tools ezEX44
Installing the ezEX44 connector is a straightforward process when you prepare properly and follow the sequence that leverages its unique features. Begin with the right cable preparation and ensure you have a compatible crimping tool. Although the ezEX44 is designed to simplify the termination process, a standard RJ45 crimping tool or a tool approved by the manufacturer will help you achieve uniform, repeatable outcomes. Here’s a clear, installer-focused workflow to get you clean, compliant terminations on every run.
- Prepare the cable and conductors Start with Cat6 cable that is within the recommended length and twist specification. Strip back the outer jacket to expose the conductor pairings without nicking the insulation. Use a cable stripper to remove only the necessary amount of jacket, leaving enough length for a clean, secure crimp in the connector. Ensure there are no frayed strands and that the conductors are ready for insertion.
- Inspect and arrange wires by the standard termination order Before seating the conductors into the ezEX44, lay out the wires in the correct order according to the intended wiring standard (for example, T568B or T568A, as required). The integrated load bar and the front-end design help you confirm the order visually, so take a moment to verify alignment against your plan.
- Feed conductors through the front-end and align with the load bar If your configuration demands it, feed the conductors through the front end of the connector to allow the big conductors to pass through for verification. Ensure each conductor is seated properly in its corresponding slot or channel and that the staggered load bar guides the wires into the correct positions before crimping.
- Crimp with a compatible tool Place the connector into a suitable RJ45 crimping tool that is approved for use with Cat6 connectors. Apply steady, even pressure until the tool completes its cycle. The combination of the ezEX44’s design and a proper crimp should yield a firm seat and a clean, finished housing with no stranded fibers protruding.
- Inspect and test the termination After crimping, visually inspect the terminated plug for proper seating and uniform contact heights. If possible, perform a simple continuity check or use a cable tester to confirm the wire sequence is correct and that there are no open or shorted pairs. The goal is a reliable, clean pass-through termination that passes all standard Cat6 test criteria.
Frequently asked questions
- What is the ezEX44? The ezEX44 is a patented EZEX family RJ45 Cat6 connector with an integrated Hi-Lo stagger load bar and a pass-through front end that enables pre-termination sequence verification for larger conductors before terminating.
- Which cables does it support? It is designed primarily for Cat6 cabling, with practical applicability to smaller Cat6A configurations in certain installations, offering enhanced termination visibility and reliability for typical office and home networks.
- Do I need a special tool to use the ezEX44? While you can terminate with a standard RJ45 crimping tool, using a tool that is compatible with Platinum Tools ezEX connectors ensures the best results and consistency across terminations. Always follow the tool’s instructions in conjunction with the connector’s design.
- Can I reuse the connector if I mis-wire it? Reusing a terminated connector is not recommended. If a mis-wiring occurs after inspection or if the wiring sequence is not correct, cut back the cable, re-strip, re-prepare, and re-terminate with a fresh ezEX44 connector to ensure reliable performance.
- Is the ezEX44 suitable for professional installations? Yes. The ezEX44 is engineered for professional installations requiring dependable, repeatable terminations, reduced rework, and clear wiring verification. It’s well-suited for small to mid-sized networks, data centers, and professional AV/IT setups where speed and accuracy matter.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 30 reviews
Sort
Product Reviews
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Versatile Room Divider With Easy Assembly and Strong Coverage
Size: 3 Panel 12FT W
I picked up this Siebwin 3-panel folding room divider mainly for privacy and room separation, and overall it works very well.
Assembly is very straightforward, and the divider can be set up, taken apart, and stored without much effort. The fabric quality feels good, and the frame construction is stronger and more stable than expected. The support tubes especially feel well built and help keep the divider standing securely.
One feature I really liked is the flexibility of the design. The panels can be used together as a complete divider or separated depending on the setup and available space. That makes it much more versatile for different room layouts or temporary privacy needs.
The coverage is also very good, and the size matches the manufacturer’s description accurately. The fabric blocks light and background visibility well enough to provide solid privacy without feeling overly heavy. The wider feet also help improve stability compared to thinner folding dividers.
Another positive detail is that everything arrived complete with no missing parts or damaged pieces, which made assembly much easier and faster.
Compared to cheaper privacy screens, this one feels more durable and easier to customize depending on the situation. In terms of value for the money, it feels like a very practical and worthwhile purchase considering the size, flexibility, and build quality.
Overall, a versatile and well-built room divider with easy assembly, strong privacy coverage, stable construction, complete included parts, flexible panel configuration, and excellent everyday functionality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Stable, flexible in deployment configuration, creates true privacy and looks great.
Size: 3 Panel 12FT W
This is the second room divider panel I have installed, and there are several features about this one that I like much better than my older one.
The fact that there are no gaps and that the material is thicker means you get more privacy or more hiding power, if you wish. My older divider has vertical spaces between each of the panels and the panels are half as wide as the Siebwin panels, so there are many vertical spaces. The Siebwin divider really creates privacy.
Another feature that I really appreciate is that the legs are wider and stand off from the floor. On my older one the legs are flat and they're rather awkward to adjust because they create more drag on the floor. The feet on the older one also loosen if you turn them counter clockwise, so adjustments of configuration that require the feet to be moved are more complex.
The older divider also must be deployed in a zig-zag fashion because he feet are not as wide, but this new one can be deployed and stable in a straight, an "N" shape or an arc. They are both the same length, but because the older one must be use in a zig-zag deployment it doesn't reach to the length of the new one.
The Siebwin divider definitely costs more at $103.48, but it sports several features and advantages over the other brand, so it does a better job and is worth the extra cost.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 4
Easy to assemble, does the job, material is shiny nylon and shows creases, minor defects, sloppy
Size: 3 Panel 12FT W, Size: 3 Panel 12FT W
The Siebwin room divider is a good idea, and for the price, it mostly delivers on the intended functionality. I ordered the 12 foot, 3-panel version mainly to hide an unfinished basement storage area that had become an eyesore. It works well for that purpose and gives the space a cleaner appearance without spending the kind of money that more decorative dividers or custom partitions cost. If you need something temporary, portable, or mainly functional, this is a viable option.
There are a few limitations that became obvious during setup and use. The first thing I noticed was that the weld quality on some of the metal poles is fairly sloppy. Once the cover is installed, you do not really see it, but up close, it does not look especially refined or professional. The blackout material also is not a matte canvas style fabric as I expected. It has more of a shiny nylon appearance, and the creases are fairly visible. Being that it’s more of a nylon, I’d be hesitant to try steaming it to remove the creases. However, the creases do not matter if you are using it in a basement, dorm, or shared room, but for photography, video work, or a professional office setting, the appearance could be disappointing. The fabric is thick enough, though. It blocks visibility well enough, but strong light behind it still shows through to some extent, nothing deal-breaking. Also, my fabric appeared to be slightly defective. The hook and loop strip on one of the bottom sections was off-center and couldn't be totally attached because it was lined up with one of the legs. I originally hoped to use this as a video backdrop, but I will probably end up replacing the fabric with a proper green screen or canvas material while continuing to use the frame itself. For now, it does a good job of covering my basement junk.
Assembly was actually easier than I expected and took roughly 15 to 20 minutes. The longer vertical poles are tethered together similarly to tent poles, which made setup straightforward and fairly intuitive. The shorter horizontal pieces slide and snap together to the top and bottom of the vertical assembly. After each section is assembled, the divider panels connect together with metal plates and two knurled screws (at the top and bottom), so no tools are really required. A few screws were difficult to start because paint had gotten into the threads, but once they caught, they tightened down normally. The feet install with similar knurled fasteners and help keep the divider reasonably stable. One thing to watch for during setup is the fabric orientation. There is one arrow indicator in the middle of the fabric to indicate up. However, if you need another indicator, the smaller hook and loop strip goes on the bottom while the longer strip goes on top. I realized mine was upside down right before finishing and had to redo it. I wasn't difficult to redo, despite the defect in mine.
The overall design is practical and easy to move around. I do like that the panels can fold and bend into different shapes depending on the space. The widened feet help stability, although when trying to stretch the fabric tight, I noticed the poles sometimes wanted to overlap slightly at the joints. Tightening everything helped somewhat, but it still happened occasionally. The divider feels adequate for normal indoor use, though I would not expect premium durability or luxury-level fit and finish at this price point. The entire device can also be easily disabled and stored in a tote if you need it completely out of the way. It comes with assembly instructions, but even if you didn’t have them, it’s easy to build without them (save a mistake or two).
In terms of value, I think the Siebwin divider mostly matches its price. Around $100 gets you a large freestanding partition with decent usability and easy assembly, but there are compromises in materials, appearance, and refinement. The defects are also off-putting, but hopefully you won't have them. Higher-end room dividers can easily cost two or three times more, so some of the tradeoffs are expected. I also noticed cheaper alternatives online, but based on the quality here, I suspect those would probably have even more issues. For practical home use, temporary privacy, hiding storage areas, or separating shared spaces, this is a good option as long as expectations stay realistic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
recommand products
00, Palma, City With Number, Women's Short Sleeve Round White T-shirt 00008
20.00
00, Baltimore, City With Number, Women's Short Sleeve Round White T-shirt 00008
20.00
Sabian 11819XN HHX New Symphonic French Marching Band Cymbals - 18"
482.50
00, Vigo, City With Number, Women's Short Sleeve Round White T-shirt 00008
20.00
King Cobras Breakaway Fall Fleece Adult Hoodie
87.95