Kramer 4K60 4:2:0 HDMI HDCP 2.2 PoE Receiver with RS-232 & IR over Long-Reach HDBaseT

The Kramer TP-780R is a high‑performance, long‑reach HDBaseT receiver engineered for demanding commercial AV installations. Designed to simplify professional video distribution, this receiver delivers pristine 4K60Hz (4:2:0) HDMI signals, alongside RS‑232 and IR passthrough, over a single twisted‑pair CAT cable. Whether you’re deploying a digital signage network, conference room system, or a home theater with multi‑room control, the TP‑780R combines robust performance with streamlined setup and reliable operation at extended distances.

• Long‑reach HDBaseT distribution — Extends high‑quality video, control, and power signals up to 40 meters (130 feet) over standard CAT copper cable, enabling flexible room layouts and centralized equipment placement.
• 4K60Hz compatibility, 4:2:0, 24bpp — Supports ultra‑high‑definition video at 4K60Hz with 4:2:0 chroma subsampling and 24‑bit color depth for vibrant, cinema‑quality imagery with reduced bandwidth requirements.
• HDCP 2.2 compliant — Ensures secure, copy‑protected 4K content from modern sources, safeguarding premium media streaming and presentation materials across the network.
• PoE powered receiver — Powers the receiver remotely via Power over Ethernet, simplifying installation by reducing the need for separate power supplies in many configurations.
• RS‑232 and IR control over HDBaseT — Enables seamless remote control of connected sources and displays, consolidating equipment management within your control system for a clean, single‑cable solution.

Technial Details of Kramer 4K60 4:2:0 HDMI HDCP 2.2 PoE Receiver with RS-232 & IR over Long-Reach HDBaseT

• Video: HDMI 4K60Hz support with 4:2:0 chroma subsampling, 24‑bit deep color
• HDCP: HDCP 2.2 compliant for 4K protected content
• Transmission: Long‑reach HDBaseT over twisted pair CAT cable
• Reach: Up to 40 meters (130 feet) on CAT copper cables
• Power: PoE enabled receiver (Power over Ethernet); optional external power if needed
• Control: RS‑232 and IR passthrough for remote device control
• Compatibility: Designed to pair with suitable HDBaseT transmitters for seamless AV distribution
• Form factor and installation: Rack‑mount or shelf‑mount friendly, built for durable professional use

how to install Kramer 4K60 4:2:0 HDMI HDCP 2.2 PoE Receiver with RS-232 & IR over Long-Reach HDBaseT

1) Plan the layout: Identify a central location for the HDBaseT transmitter and the display, ensuring the CAT cable path allows for the 40 m reach without sharp bends or interference.

2) Connect the transmitter: Install the HDBaseT transmitter at the source end, connecting the HDMI source device (e.g., Blu‑ray player, media server, or presentation computer) to the transmitter input. Verify the source supports HDCP 2.2 if you plan to view protected 4K content.

3) Run CAT cable: Use high‑quality CAT6a (or better) cable between the transmitter and the TP‑780R receiver. Maintain the recommended distance of up to 40 meters and avoid excessive cable stiffness or kinks to preserve signal integrity.

4) Connect the receiver: Attach the TP‑780R’s HDMI output to the display or UHD monitor. If your installation includes a control system, wire the RS‑232 and IR control lines from the receiver to your controller or IR receiver/emitter arrays as required.

5) Power the system: Power the transmitter and receiver via PoE if your network switch or injector supports it. If PoE is not available, connect the TP‑780R to a compatible external power supply per the installation guidelines.

6) Configure and test: Power on all devices, select the appropriate input on your display, and test both video and control channels. Confirm HDCP 2.2 handshake, 4K60 video stability, and RS‑232/IR responsiveness across the entire installation.

7) Optimize performance: If you encounter any latency or control delays, review cable quality, verify that the transmitter and receiver are matched pairs, and ensure no additional devices in the chain are introducing interference or signal degradation.

The TP‑780R is designed to deliver a clean, plug‑and‑play experience for professionals who require a reliable, long‑reach solution without compromising video quality or control capability. By consolidating video, audio, and control signals over a single cable, it reduces clutter and simplifies installation in conference rooms, auditoriums, classrooms, and residential AV setups.

Frequently asked questions

• What resolutions does the TP‑780R support? It is designed for 4K60Hz (4:2:0) video, with support for lower HD resolutions as needed by the source or display. HDCP 2.2 compliance ensures protection for 4K content.
• Is power over Ethernet (PoE) available for this receiver? Yes. The TP‑780R is a PoE receiver, so it can be powered from a PoE‑capable switch or injector. If PoE is unavailable, you can use an external power supply compatible with the unit's power requirements.
• What is the maximum cable length for 4K video? The long‑reach HDBaseT capability supports up to 40 meters (approximately 130 feet) on standard CAT copper cables, depending on cable quality and installation conditions.
• Can I control my display or source remotely? Yes. The TP‑780R provides RS‑232 and IR passthrough, allowing integration with your control system to manage displays, sources, and other AV equipment from a central location.
• Is HDCP 2.2 required for all content? For 4K content protected by HDCP 2.2, compliance is essential for proper playback on compatible displays and sources; the TP‑780R is designed to support HDCP 2.2 handshakes over HDBaseT.