Park 480 Brushless Outrunner Motor, 910Kv

Park 480 Brushless Outrunner Motor, 910KvFeatures Back to Top ^ Perfect match for 3D park flyers weighing 2030 oz (565850 g) Ideal for scale park flyers 2535 oz (710990 g) Ideal for models requiring up to 250 watts of power High torque, direct drive alternative to inrunner brushless motors Includes mount, prop adapters and mounting hardware External rotor design, 4mm shaft can easily be reversed for alternative motor installations Slotted 12 pole outrunner design Quiet, lightweight operation

Features Back to Top ^ Perfect match for 3D park flyers weighing 20–30 oz (565–850 g) Ideal for scale park flyers 25–35 oz (710–990 g) Ideal for models requiring up to 250 watts of power High-torque, direct-drive alternative to inrunner brushless motors Includes mount, prop adapters and mounting hardware External rotor design, 4mm shaft can easily be reversed for alternative motor installations Slotted 12-pole outrunner design Quiet, lightweight operation High-quality construction with ball bearings and hardened steel shaft Overview Back to Top ^ The Park 480 Brushless Outrunner motor is designed to deliver clean and quiet power for 3D park flyers weighing 20 to 30 ounces (565 to 850 grams), scale park flyers weighing 25 to 35 ounces (710 to 990 grams), or models requiring up to 250 watts of power. It’s an especially good match for E-flite's Mini Edge 3D ARF (EFL2225) and Mini Funtana 3D ARF (EFL2075), and would provide extreme power for sport park flyers such as the Mini Ultra Stick ARF (EFL2250). Tech Notes Back to Top ^ This motor is more ideal for the Gen II Thunder Power cells. The 1020Kv version is more ideal for the Thunder Power Pro-Lite cells (ending in PL). Maximum operating temperature: 220 degrees Fahrenheit. Adequate cooling is required for all motor operation at maximum current levels. Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required. You will need... 20A–35A brushless ESC 2S–3S Li-Po or 6- to 10-cell Ni-MH/Ni-CD 10x7–12x6 propeller How to Determine a Model's Power Requirements (68 KB) Specifications Back to Top ^ Type: Brushless outrunner Size: Park flyer Bearings or Bushings: One 4 x 9 x 4mm Bearing, and One 4 x 10 x 4mm Bearing Wire Gauge: 16 Recommended Prop Range: 10x7 to 12x6 Voltage: 7.2 to 12 RPM/Volt (Kv): 910 Resistance (Ri): .08 ohms Idle Current (Io): .85A @8V Continuous Current: 20A Maximum Burst Current: 25A (15 sec) Cells: 6–10 Ni-Cd/Ni-MH or 2–3S Li-Po Speed Control: 20–35A brushless Weight: 87 g (3.1 oz) Overall Diameter: 35mm (1.40 in) Shaft Diameter: 4mm (.16 in) Overall Length: 33mm (1.30 in)