AQUA-X 11 - Natural Appearance, Penetrating Concrete Sealer and Stone Sealer

COLD WEATHER WARNING: Do not apply if the temperature is expected to be below 50° for 48 hours before & after application. 

AQUA-X 11 is water-based, penetrating concrete & stone sealer that is designed for professional application but can be used by anyone! Keep a clean, natural appearance and improve the durability of your concrete driveway, patio pavers, unglazed cement tiles, concrete block retaining wall, cast concrete or your unpolished garage floor. Being water-based and water-repellant, AQUA-X 11 protects against concrete spalling, freeze-thaw, pitting, and salt damage after sealing. This makes regular clean-up and maintenance a breeze. Breathe easy when applying AQUA-X 11 Concrete & Stone Sealer due to no harsh odor and low VOCs as so many reviews have noted. No need for masks or extra ventilation when using indoors. Your money goes further with AQUA-X 11 concrete & stone sealer with an excellent coverage rate of 100-400 square feet per gallon on Concrete and Concrete Paver surfaces and up to 800 square feet per gallon on Stone surfaces. You can expect at least 2-4 years before resealing (depending on your environment and if harsh cleaners are used).

AQUA-X 11 requires an easy 1 coat application on most surfaces with only 1-hour wait for foot traffic and 2 hours for vehicle traffic (high humidity and low temperatures might increase dry time). Take a look at our Quick Start Guide and How-To Videos for extra information.

Rated the BEST mold inhibiting concrete driveway sealer by Bob Villa

• Natural, Clear Finish
• No Color Enhancement
• Easy Application

• Penetrating Sealer
• Water Based
• Superior Water Repellence

• Low VOC
• Concrete Surfaces
• Clay Paver Surfaces

Reduces pitting and crawling from freeze/thaw conditions.

Helps keep water from penetrating and damaging your surface.

Gives your pavers that Natural Look while still being protected.

Generally, a light pressure wash is all that's needed.

• The sprayer will help distribute the product more evenly on the surface. Any sprayer will work for our products, although high pressure sprayers will allow higher coverage rates.
• The tape will be used to secure the protective paper or plastic on areas that you don't want the sealer to enhance, such as your doors, garage door, garden, etc.
• The roller should be used to back-roll any puddles or drips, and to smooth the sealer in textured areas. If you’ve re-sanded the paver joints, ensure that the sand is 1/8" below the top of the paver surface to avoid pulling it up on the roller.
• The protective paper (plastic or paper) will be used to block off the areas where you don't want sealer to be applied.
• The extension pole will be used to attach to the roller handle and roller nap. This will allow you to roll onto the surface without bending over.
• And most importantly have a great attitude when starting your project