AKG C12-VR Large-Diaphragm Condenser Microphone

AKG C12-VR Large-Diaphragm Condenser MicrophoneThe AKG C12 VR is a 9 pattern large diaphragm tube condenser microphone based on the legendary AKG C12. Mere mention of a vintage C12 here at Redone will spark a serious discussion. The original C12, which was manufactured from 1953 1960, is considered by many recording engineers to be one of the holy grails of tube condenser mics. Handcrafted in Vienna, today's C12 VR uses the original 6072A vacuum tube and dual diaphragm design but incorporates an

The AKG C12 VR is a 9-pattern large-diaphragm tube condenser microphone based on the legendary AKG C12. Mere mention of a vintage C12 here at Redone will spark a serious discussion. The original C12, which was manufactured from 1953-1960, is considered by many recording engineers to be one of the holy grails of tube condenser mics. Handcrafted in Vienna, today's C12 VR uses the original 6072A vacuum tube and dual-diaphragm design but incorporates an updated, edge-terminated CK12 capsule and state-of-the-art componentry for lower noise and distortion and reliable operation.

• An enhanced version of the highly sought-after AKG C12
• Edge-terminated CK12 capsule and original 6072A vacuum tube
• Selected state-of-the-art component for low noise and reliable operation
• Dual-diaphragm, 1" diameter gold sputtered mylar foil
• 9 remotely selectable polar patterns for maximum flexibility
• Multiple patterns with silent switching, remotely controlled from power supply
• Polar patterns: omnidirectional, cardioid, and figure-8, with 6 intermediate patterns (silent switching)
• Frequency response: 30Hz–20kHz (±2.5dB from published curves)
• Impedance: 200 ohms (±25%); recommended load impedance: 1000 ohms or greater
• Output connector (from control unit): XLR (pin 2 positive)
• Output connector (from microphone): Tuchel 12-pin
• Sensitivity at 1kHz: 10 mV/Pa for all patterns; -40dB (dB re 1 V/Pa)
• Equivalent noise level (A-weighted): 22dB (DIN 45412)
• Sound pressure level for 3% THD: 128dB (equivalent to 50 Pa)
• 2-position pre-attenuation pad: 10dB, 20dB
• 2-position highpass filter: 100Hz, 130Hz
• Aluminum flight case, N 12 VR remote power supply, H 15/T elastic suspension, MK 12V R 30-foot connecting cable, and W 42 foam windscreen included