HPE HSR6800 8-Port OC-3c/STM-1c POS MIC-X Module

The HPE HSR6800 8-Port OC-3c/STM-1c POS MIC-X Module is a high-density expansion card designed to extend the capacity and versatility of HPE’s HSR6800 data networking platforms. Built for optical networks and enterprise-grade service delivery, this MIC-X module unlocks eight OC-3c/STM-1c network ports in a compact, fiber-ready form factor. It’s engineered to deliver reliable, scalable performance in demanding environments, making it an ideal solution for telecom operators, managed service providers, and large enterprises seeking to maximize their routing and switching headroom without compromising latency or signal integrity. By providing a robust OC-3c/STM-1c interface suite in a single expansion module, you gain flexible fiber connectivity, simplified topology expansion, and improved bandwidth utilization across your core, edge, and access networks.

• 8 x OC-3c/STM-1c network ports enable high-density optical connections for data networking and service delivery across core and edge deployments.
• MIC-X expansion module designed for HPE HSR6800 systems, enabling scalable growth while preserving chassis real estate and reducing total cost of ownership.
• Optical fiber connectivity supports efficient long-distance transmission with low latency and minimal signal loss, ideal for carrier-grade applications and campus networks.
• Optimized for data networking and optical networks, delivering dependable performance in environments that demand consistent throughput and reliable uptime.
• Supports up to 155.52 Mbps data transfer rate per OC-3c/STM-1c link, providing robust bandwidth to handle diverse traffic patterns including voice, video, and data services.

Technical Details of HPE HSR6800 8-Port OC-3c/STM-1c POS MIC-X Module

• Ports: 8 x OC-3c/STM-1c
• Interface: OC-3c/STM-1c over optical fiber
• Module Type: MIC-X expansion module for the HSR6800 chassis
• Primary Application: Data networking and Optical Network environments
• Maximum Transfer Rate (as specified): Up to 155.52 Mbps per OC-3c/STM-1c link

how to install HPE HSR6800 8-Port OC-3c/STM-1c POS MIC-X Module

Installing the HPE HSR6800 8-Port OC-3c/STM-1c POS MIC-X Module is a straightforward process designed to minimize downtime and maximize reliability. Before you begin, ensure you have the appropriate safety precautions in place and that you are working in a static-safe environment. The following steps outline a typical installation workflow that applies to standard HSR6800 chassis configurations:

1) Power down and prepare the chassis. Turn off the HSR6800 system and unplug power sources if required. If you’re operating in a hot-swappable environment, follow your organization’s procedures for safe hot-swapping. Confirm that the chassis is stable and that there is ample clearance around the module slot to avoid any accidental damage during removal or insertion.

2) Access the expansion slot. Locate the expansion bay or slot designated for MIC-X modules within the HSR6800 chassis. Remove any blanking plates if present and inspect the slot for alignment guides and connectors to ensure a smooth installation.

3) Align and insert the MIC-X module. Carefully align the MOLEX/connector interfaces and edge guides, then slide the MIC-X module into the slot with gentle, steady pressure. Ensure the module seats firmly and remains parallel to the chassis frame to prevent misalignment of the OC-3c/STM-1c ports.

4) Secure the module. Fasten any retention screws or latches as required by the chassis design. Confirm that the module is locked in place and that there is no wobble or play in the installation. A properly seated module will provide a stable signal path for all OC-3c/STM-1c ports.

5) Connect fiber cables and transceivers. Attach the OC-3c/STM-1c fiber cables to the corresponding ports on the MIC-X module using the recommended adapters or connectors. If your deployment uses SFP/LC connectors or other transceiver interfaces, ensure they are compatible and properly inserted. Handle fiber optic cables with care to avoid bending or stressing the fibers, which can degrade performance.

6) Power up and perform basic checks. Restore power to the chassis and boot the system. Access the device management interface (CLI or GUI) and verify that the MIC-X module is recognized by the HSR6800. Check port status indicators for link activity and confirm that the 8 OC-3c/STM-1c ports are online and ready.

7) Configure and test. Implement appropriate channelized, multiplexed, or service-oriented configurations for your OC-3c/STM-1c links. Run initial connectivity tests, monitor error counters, and validate throughput against your service level agreements. If necessary, adjust QoS policies, framing, and synchronization settings to optimize performance for your specific traffic mix.

8) Document and secure. Record the installation details, including slot number, port assignments, and cable routing. Proper documentation helps with future maintenance and upgrades and ensures consistent fault diagnosis. Finally, secure the chassis and cable management to prevent accidental disconnects or physical strain on the ports.

Note: The exact installation steps may vary slightly depending on your HSR6800 model, firmware version, and your network’s design. Always refer to the official HPE installation manuals and your organization’s change-management procedures for precise instructions and safety guidelines.

Frequently asked questions

Q: What is the HPE HSR6800 8-Port OC-3c/STM-1c POS MIC-X Module used for?

A: This MIC-X module provides eight OC-3c/STM-1c optical network ports that expand the capacity of the HSR6800 series. It is used to support high-density data networking and optical network deployments, enabling scalable bandwidth and flexible fiber connectivity across core, distribution, and access layers.

Q: What speeds does the module support?

A: The module supports data transfer rates up to 155.52 Mbps per OC-3c/STM-1c link. The eight ports offer a high-density pathway for reliable, carrier-grade traffic transport over optical fiber.

Q: Is this module compatible with all HPE HSR6800 chassis?

A: The MIC-X module is designed for HPE HSR6800 series systems. Compatibility should be confirmed with your specific chassis model, firmware level, and service requirements using official HPE documentation or your enterprise’s procurement records.

Q: What cable type is required for OC-3c/STM-1c connections?

A: OC-3c/STM-1c connections typically use optical fiber cables paired with the appropriate transceivers or SFP modules specified for OC-3c/STM-1c operation. Ensure you select compatible connectors, fiber type (single-mode or multi-mode as applicable), and correct transmitter/receiver configurations to maintain signal integrity over the intended distances.

Q: How do I verify proper operation after installation?

A: After installation, verify port status indicators for link activity, check error counters in the device management interface, and run end-to-end tests to confirm throughput and latency meet your network requirements. Monitoring tools and SNMP-based checks can help maintain ongoing visibility into performance and reliability.

Q: Can the OC-3c/STM-1c ports be used for different services simultaneously?

A: Yes. OC-3c/STM-1c ports are typically configured to carry multiple service channels through multiplexing or channelized configurations. Your network design will determine how you allocate bandwidth across different services (data, voice, video) and how QoS policies are applied to guarantee performance for each service type.