Eaton 5PX G2 1950VA 1950W 120V Line-Interactive UPS - 6 NEMA 5-20R, 1 L5-20R Outlets, Cybersecure Network Card Included, Extended Run, 2U Rack/Tower - Battery Backup

The Eaton 5PX G2 1950VA 1950W 120V Line-Interactive UPS is a premium power protection and backup solution built for small businesses, IT closets, classrooms, and edge deployments. It combines intelligent power management with a robust, compact 2U design that can be mounted in a standard rack or used as a freestanding tower. With a 1950VA/1950W rating at 120V, this unit delivers reliable, clean power to servers, switches, NAS devices, and network gear, keeping critical workloads online during outages and voltage fluctuations. Enhanced by a Cybersecure Network Card, extended runtime options, and user-friendly management features, the 5PX G2 is designed to minimize downtime, protect data integrity, and simplify remote administration in a modern, security-conscious environment.

• High-capacity protection for essential IT gear: 1950 VA / 1950 W at 120V provides sufficient buffer to gracefully shut down servers and networking equipment, maintain access to critical data, and support brief outages without losing work or corruptting files. The line-interactive topology with automatic voltage regulation (AVR) smooths minor sags and surges, preserving battery life and reducing wear on power supplies while delivering clean, stable output to connected loads.
• Flexible outlet configuration for mixed workloads: The UPS features 6 NEMA 5-20R outlets plus 1 L5-20R locking outlet, enabling a versatile arrangement for a variety of devices. You can place essential equipment on battery-backed outlets to stay online during outages, while nonessential peripherals benefit from surge protection. The combination supports a compact rack-mounted server, a small switch stack, NAS, and related peripherals in a single, organized power strip arrangement.
• Secure remote management with a cybersecure network card: Included Cybersecure Network Card provides secure, remote access to UPS status, battery health, and event notifications. When paired with Eaton IPM software, you gain visibility across multiple devices, automated shutdowns, firmware integrity checks, and encrypted communication to protect management traffic from cyber threats.
• Scalability through extended runtime: The 5PX G2 is designed for growth, supporting external battery modules (EBMs) to extend runtime for longer outages or to sustain critical workflows through extended power events. This scalable approach lets you tailor backup time to your specific environment, ensuring essential servers and networking gear stay operational while power is restored or systems are gracefully shut down.
• 2U rack/tower flexibility with intuitive management: The compact 2U form factor fits neatly in standard 19-inch racks or can be used as a floor-standing tower. A bright, information-rich LCD interface presents real-time status, including load, input/output voltage, battery level, and estimated runtime. Energy-efficient features such as Eco-mode help reduce overall power consumption when the load is non-critical, delivering smarter power usage without sacrificing protection.

Technical Details of Eaton 5PX G2 1950VA 1950W 120V Line-Interactive UPS

• Capacity: 1950 VA / 1950 W
• Output/Input: 120 V AC input and 120 V AC output (60 Hz)
• Topology: Line-Interactive with Automatic Voltage Regulation (AVR)
• Form factor: 2U rack/tower convertible
• Outlets: 6 x NEMA 5-20R; 1 x L5-20R
• Network card: Cybersecure Network Card included for secure remote management
• Management: USB and Serial connectivity; compatible with Eaton Intelligent Power Manager (IPM) software
• Battery system: Supports external battery modules (EBMs) for extended runtime
• Runtime options: Scalable with EBMs to match outage duration requirements
• Monitoring: Self-test, battery health monitoring, and real-time status reporting via onboard display or IPM
• Security: Includes secure network card to protect management data and access

how to install Eaton 5PX G2 1950VA 1950W 120V Line-Interactive UPS

• 1) Choose installation location: Select a stable, well-ventilated area with adequate clearance for hot air exhaust and cabling. Decide whether you will mount the unit in a rack (2U) or place it on a sturdy surface to use in tower mode.
• 2) Mounting or positioning: If wiring in a rack, use the included rails or adapters to secure the UPS in a standard 19-inch rack. Ensure the unit is level and not obstructing access to connectors and the LCD display. If using as a tower, place it on a flat surface with proper airflow around the enclosure.
• 3) Connect loads to outlets: Plan a load distribution so critical devices—such as servers, network switches, and storage—occupy battery-backed outlets. Connect nonessential peripherals to surge-protected outlets as needed. Attach cables neatly to avoid strain on outlets.
• 4) Connect to the mains: Plug the UPS into a grounded 120V supply using the appropriate power cord. Avoid power strips or daisy-chaining; ensure a dedicated circuit if possible to minimize nuisance tripping during outages.
• 5) Install and configure the Cybersecure Network Card: If not pre-installed, insert the included Cybersecure Network Card into the designated slot and connect the UPS to your management network with a standard Ethernet link. Configure TLS, authentication, and IP filtering as recommended in the IPM software documentation to secure monitoring and shutdown actions.
• 6) Connect local management interfaces: Attach a USB or Serial cable to a computer or management workstation and install Eaton IPM software or use the built-in LCD interface to verify basic operation, run a self-test, and confirm communications with the computer.
• 7) Enable monitoring and shutdown policies: Within IPM or the UPS configuration interface, set up automatic shutdown policies for connected servers, define alert thresholds, and schedule regular self-tests to maintain readiness.
• 8) Add external battery modules if needed: If extended runtime is required, install EBMs according to the manufacturer’s instructions and configure runtime settings in IPM to reflect the new capacity. Confirm that the EBMs are detected and supplying power during a simulated outage.
• 9) Verify operation: Perform a controlled outage test to confirm that the UPS transitions to battery power, loads remain stable, and graceful shutdowns occur when the battery reaches a critical level. Re-check alarms and logs to ensure proper monitoring.

Frequently asked questions

• What devices can I protect with the Eaton 5PX G2? It is designed to protect servers, network equipment (routers, switches, NAS), workstations, and other critical IT gear in small business environments. Its 120V output and multiple outlets make it suitable for common office and data room setups.
• Does this UPS support remote management? Yes. The unit ships with a Cybersecure Network Card for secure remote monitoring and control, and it is compatible with Eaton’s IPM software for centralized management, alerting, and automated shutdowns across multiple devices.
• Can runtimes be extended? Absolutely. The Eaton 5PX G2 supports external battery modules (EBMs) to extend runtime for longer outages. Runtime is scalable by adding EBMs, allowing you to tailor protection for your specific load profile and uptime requirements.
• How do I install or replace batteries? The UPS uses replaceable internal batteries and supports EBMs for extended runtime. When battery health declines, replace the internal batteries according to the service guidelines or use authorized service providers. Always perform battery replacements with the unit disconnected from mains and following safety procedures.
• What is the ideal installation environment? Place the UPS in a clean, dry area with adequate airflow and away from heat sources or excessive dust. Ensure clearance for the LCD display and front panel access. If rack-mounted, provide proper rack space and secure mounting to prevent movement during power events.
• Will the 5PX G2 protect against power surges? Yes. In addition to battery backup, the unit provides surge protection for connected equipment and uses AVR to maintain stable output voltage, helping protect sensitive electronics from voltage fluctuations.
• How can I verify the UPS status? Use the front LCD display for quick, at-a-glance information, or connect via USB/Serial or the Cybersecure Network Card to monitor runtime, battery health, load level, and event history through Eaton IPM software.