Pay in installments of $273.62 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 11 - Aug 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Ashly NX1504 Nx Series 4-Channel Multi-Mode Power Amplifier 150WAshly NX1504 overview The nX Series 4 Channel Multi Mode Power Amplifier from Ashly is capable of driving 2, 4, and 8 ohms loads at full power and offers a maximum rated output power of 150W per channel at 25V, 70V, and 100V modes. It features a universal switch mode power supply with PFC (Power Factor Correction) that operates from 70 to 270 VAC. The multi mode output capability allows each individual amplifier output channel to be set for low
Ashly NX1504 overview
The nX Series 4-Channel Multi-Mode Power Amplifier from Ashly is capable of driving 2, 4, and 8 ohms loads at full power and offers a maximum rated output power of 150W per channel at 25V, 70V, and 100V modes. It features a universal switch-mode power supply with PFC (Power Factor Correction) that operates from 70 to 270 VAC. The multi-mode output capability allows each individual amplifier output channel to be set for low-impedance (2, 4, and 8 Ohms) or constant voltage (25, 70, or 100V) operation using DIP switches.
The amplifier has power-saving Ashly EMS (Energy Management System) that provides an automatic sleep-mode drawing less than 1W. It is suitable for live sound and fixed installation sound systems in stadiums, arenas, performance venues, places of worship, and convention centers.
- Utilizes Class-D switching amplifier technology
- Selectable 80 Hz second-order Hi-pass filter, limiter, and input gain per channel
- Remote DC level control per channel
- Extensive protection circuitry, continuously variable cooling fan
- Euroblock input and loudspeaker connectors
- Detachable AC mains line-cord connector
- CE, FCC, RoHS certified
-
Ashly NX1504 specs
Number of Channels 4 Voltage Gain Selectable at 26, 32, or 38 dB, or 1.4 V Damping Factor >250 (8 Ohms load <1 kHz) Filter Input High Pass Filter: 80 Hz second-order Distortion SMPTE (Typical): <0.5%
THD-N (Typical): <0.5% (8 Ohms, 10 dB below rated power, 20 Hz to 20 kHz)Channel Separation -75 dB (dB from full output, 1 kHz) Signal-to-noise >99 dB (un-weighted 20 Hz to 20 kHz, Gain @ 26 dB) Frequency Response 20 Hz to 20 kHz, ±0.05 dB Input Impedance 10 kOhms Balanced Input Euroblock 3.5 mm Maximum Input Level +21 dBu Speaker Output Euroblock 7.62 mm Level Control Remote DC Level Control: Euroblock 3.5 mm - Gnd, CV, V+ per input Attenuation Per Channel: Rear panel, fully off= mute Front Panel LED Indicators White LED:
Power Switch: On, off, flashing (standby mode)
Red LED:
Protect: On (fault condition or shut down), Off
Clip / Mute (Per Channel): Clip @ 1 dB below rated output / mute
Blue LED:
Sleep Mode: On (when the amplifier is asleep from audio inactivity)
Yellow LED:
Disable: On (when the power switch & attenuators are disabled)
Temperature (Per Channel): On dim at 90% maximum operating temperature, full bright + protect at 100%
Green LED:
Signal (Per Channel): -18 dB, below rated output
Bridge (Per Channel): Pair, On, off
Current (Per Channel): Brightness is proportional to output currentProtection Circuits Inrush current limitation, temperature monitoring, output over-power protection, and mains fuses Cooling Continuously variable temperature controlled fan Nominal Voltage Input: 120 to 240 VAC @ 50/60 Hz Operating Range 70 to 270 VAC @ 50/60 Hz Power-Up Action Minimum Power-Up: 70 VAC @ 50/60 Hz Power Supply Type SMPS with active PFC (Power Factor Correction) AC Mains Power Cord Connector: Detachable NEMA 5-15 for USA Maximum Output Power Low Impedance Output Mode (All Channels Driven at Rated Load):
2, 4, & 8 Ohms: 150 WLow Impedance Low Impedance Output in Bridge Mode (All Channels Driven at Rated Load):
4, & 8 Ohms: 300 WVoltage Output Constant Voltage Output (All Channels Driven at Rated Load):
25, 70, & 100 V (Per Channel): 150 WPower Draw Total AC Mains Power Draw (Typical Input):
Sleep Mode: <1 W
Standby Mode: 25 W
Idle (No Signal): 53 W
Typical Input (1/8 Max Power @ 2 Ohms): 230 WCurrent Draw For 120 VAC (Typical Input, Total for all Channels):
Sleep Mode: 94 mA
Standby Mode: 0.27 A
Idle (No Signal): 0.5 A
1/8 Max Power @ 2 Ohms: 2.2 A
For 240 VAC (Typical Input, Total for all Channels):
Sleep Mode: 47 mA
Standby Mode: 0.135 A
Idle (No Signal): 0.25 A
1/8 Max Power @ 2 Ohms: 1.1 AThermal Dissipation Typical Input (Total for all Channels):
Sleep Mode: 2.14 BTU/hr
Standby Mode: 86.4 BTU/hr
Idle (No signal): 180 BTU/hr
Typical (1/8 Max Power @ 2 Ohms): 505 BTU/hrEnvironmental Conditions 32 to 120°F (0 to 49°C), non-condensing
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy