Pay in installments of $1891.25 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 11 - Aug 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
DPA Microphones 5006-11A Surround Microphone KitThe 5006 11A Surround Microphone Kit from DPA Microphones includes three matched 4006A omnidirectional microphones and two matched 4011A cardioid microphones. The 4006As are matched within 0. 5dB on both frequency response and sensitivity while the two 4011As are matching within 1dB. The maximum phase response difference is 5. They can be used for AB stereo, Decca Tree, or surround main array recording techniques for orchestral settings. DPA includes
The 5006-11A Surround Microphone Kit from DPA Microphones includes three matched 4006A omnidirectional microphones and two matched 4011A cardioid microphones. The 4006As are matched within 0.5dB on both frequency response and sensitivity while the two 4011As are matching within 1dB. The maximum phase response difference is 5°. They can be used for AB stereo, Decca Tree, or surround main array recording techniques for orchestral settings. DPA includes mic holders, grids, and windscreens for all mics. The included Peli foam lined case can be used for transportation and storage.
The 4006A Omnidirectional Microphone from DPA is designed for capturing vocals, close miking instruments, amplifier cabinets, and similar sources in live sound reinforcement and crucial recording applications. It features an omnidirectional condenser element for a linear high-frequency response and detail. Additionally, the microphone allows you to maintain a linear tonal response when closely positioning it near speaker cabinets, percussion, and other instruments. Separately sold acoustic modification accessories, including a nose cone and interchangeable protection grids, allow the 4006A to acoustically transform without changing the phase and sonic character of the microphone. An output stage provides faithful recreations of the original source material and an included microphone clip and windscreen.
- Maximum linearity, particularly at the high-end
- Clean, neutral sonic character
- Omnidirectional polar pattern
- Can be used for A-B stereo pairs in symphonic concert hall recordings
The 4011A Cardioid Microphone from DPA is designed for capturing vocals, close miking instruments, amplifier cabinets, and other sources in live sound reinforcement and crucial recording applications. It features a cardioid condenser element for minimizing off-axis noise in spot-miking applications and an output stage that provides faithful recreations of the original source material. A switchable 20 dB pad provides added headroom and minimizes distortion while capturing transient signals. Additionally, the microphone allows you to maintain a linear tonal response when closely positioning it near speaker cabinets, percussion, and other instruments.
- Cardioid pickup pattern provides superb separation between sound sources
- Equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments, and vocals
- Flat on-axis frequency response and maximum phase response
- 20 dB pad switch in the center of the XLR connector to attenuate the output of the microphone
| Operating Principle | Pressure Operated |
| Capsule | Condenser |
| Diaphragm | 0.05' / 16 mm |
| Polar Pattern | Omnidirectional |
| Frequency Range | 10 Hz to 20 kHz |
| Maximum SPL | 147 dB SPL |
| Impedance | 200 Ohms |
| Load Impedance | 2 Kilohms |
| Sensitivity | -28 dB |
| Dynamic Range | 124 dB |
| Signal-to-Noise Ratio | 79 dB A-Weighted |
| Equivalent Noise Level | 15 dB A-Weighted 27 dB ITU-R 468 |
| THD | < 1% |
| CMRR | 60 dB |
| Operating Voltage | 48 V ± 4 V |
| Operating Current Consumption | 2.8 mA |
| Operating Temperature | -40 to 122°F / -40 to 50°C |
| Operating Humidity | 90% |
| Dimensions | ø: 0.75 x L: 6.69" / ø: 19 x L: 169.93 mm |
| Weight | 5.75 oz / 163 g |
| Package Weight | 1.6 lb |
| Box Dimensions (LxWxH) | 10.9 x 6.2 x 2.8" |
DPA Microphones 4011A Cardioid Microphone Specs
| Operating Principle | Pressure Gradient |
| Capsule | Condenser |
| Diaphragm | 0.75" / 19 mm |
| Polar Pattern | Cardioid |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 159 dB SPL |
| Impedance | 200 Ohms |
| Load Impedance | 2 Kilohms |
| Sensitivity | -40 dB |
| Dynamic Range | 121 dB |
| Signal-to-Noise Ratio | 76 dB A-Weighted |
| Equivalent Noise Level | 18 dB A-Weighted 25 dB ITU-R 468 |
| THD | < 1% |
| CMRR | 60 dB |
| Operating Voltage | 48 V ± 4 V |
| Operating Current Consumption | 2.8 mA |
| Operating Temperature | -40 to 113°F / -40 to 45°C |
| Operating Humidity | 90% |
| Dimensions | ø: 0.75 x L: 6.69" / ø: 19 x L: 169.93 mm |
| Weight | 5.57 oz / 158 g |
| Package Weight | 1.71 lb |
| Box Dimensions (LxWxH) | 12.8 x 7.5 x 3.9" |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy