magigoo pro ht the 3d printing adhesive

magigoo pro ht the 3d printing adhesiveMagigoo Pro HT The 3D printing adhesive for high temperature materials Magigoo Pro HT was specially developed for materials like PEEK and PEI, which have high melting points and often have adhesion difficulties on the print bed. This high temperature resistant adhesive ensures your prints stay firmly in place during long, hot print cycles and prevents warping and rippling from the very first layer. Easy release after cooling Once the print bed

Magigoo Pro HT - The 3D printing adhesive for high-temperature materials

Magigoo Pro HT was specially developed for materials like PEEK and PEI, which have high melting points and often have adhesion difficulties on the print bed. This high-temperature resistant adhesive ensures your prints stay firmly in place during long, hot print cycles and prevents warping and rippling from the very first layer.

Easy release after cooling

Once the print bed temperature has dropped to room temperature, the adhesive bond weakens, allowing parts to be easily removed with a gentle tap or push. No tools or scrapers are needed, protecting your prints and the print surface.

Safe, convenient, and clean

The water-based, odorless, and non-toxic formula makes this adhesive ideal for use at home, in the lab, and in industrial environments. The pen-style applicator allows for clean and precise application without spray mist. Cleaning is easy with a damp cloth or warm water.

Ideal for professional and industrial applications

Magigoo Pro HT is perfect for engineers and professionals working with demanding applications such as aerospace components, medical devices, or chemical-resistant parts. It supports large-format prints and ensures consistent first-layer adhesion even under extreme temperatures.

Recommended application instructions

1. Shake the pen thoroughly to mix the components.
2. Apply a thin, even layer to a clean, cold print bed.
3. Heat the print bed according to the filament settings (up to 160 °C), start the print, and let the bed cool completely – your part will release easily.
4. Clean the plate after printing with a damp cloth or warm water – no solvents required.