Products Manufactured

by Water Systems

While manufacturing, Water Systems keeps in mind three key factors :

  • Cost
  • Technical performance
  • Environmental impact

Drilling Chemicals

Drilling Starch

  • Water Systems Starch HT (High Temperature)
  • Water Systems Starch NF
  • Water Systems Starch
  • Water Systems starch is a modified drilling starch available in different grade as free flowing powder which is used for controlling fluid loss in water base mud .It is a non-ionic polymer and proves to be a most economical way for filtration control for all types of water based drilling fluid systems. It is pregelintaed to give maximum effect and provide wellbore stability.Water Systems Starch meets/exceeds OCMA DFCP5 & API13 A Section 11 specifications for starch.

Lubricant

  • Water Systems Lube GP
  • Water Systems Lube EP
  • Water Systems Lube ET
  • Water Systems Lube Sil
  • Water Systems Lube is a high temperature, Extreme Pressure Lubricant which is dark coloured liquid free from impurities. Used in all types of Mud systems it reduces torque and drag, provides high temperature stability and reduces friction leading to reduced corrosion. Water Systems extreme pressure lubricating muds increased over-all bit life three to fourfold, reduced drilling torque and wear on drill pipe and drill collars. It does not affect rheology or gel strength and does not give foaming effect.

Defoamer

  • Water Systems Defoam A (Alcohol based )
  • Water Systems Defoam G (Glycol based)
  • Water Systems Defoam S (Silicone- oil based)
  • Water Systems Defoam SE (Silicone – Emulsion based)
  • Water Systems Defoam PLUS (Combination / all purpose)
  • Water Systems Defoamer available in different grades used as oil drilling defoamer, it’s a chemical additive used to prevent the formation of foam during the preparation of a treatment fluid or slurries at surface. Primarily used for minimizing foaming tendencies of water based muds by surpressing foaming effect under severe conditions and is effective against most types of foam in wide range of temperatures, pH and tolerates high concentration of salts. It also stabilizes pump pressure by removing trapped gas / air. It is effective at high temperatures and varied pH levels in water based muds.

Glycols

  • Water Systems Glycol LC
  • Water Systems Glycol MC
  • Water Systems Glycol HC
  • Water Systems Glycol HS
  • Water Systems Glycol NC
  • Water Systems Glycols are used as shale inhibitors. It is used in water based drilling fluids to improve lubricity, shale stability and extends the temperature stability.Water Systems Glycol remains unaffected by contaminants, providing high rate of penetration with enhanced inhibition and lubricity for the drilling mud. It is compatible with most salts along with providing thermal stability to polymers and is committed towards environment. The Cloud Point of the Glycols can be adjusted as per the requirements of the customer.

Emulsifiers

  • Water Systems Emul P (Primary Emulsifier)
  • Water Systems Emul S (Secondary Emulsifier)
  • Water Systems Emul OP (One Pack Emulsifier)
  • Water Systems Emulsifier is multiutility product which can be used for different application, primarily to provide improved emulsion and for filtration control, as a secondary wetting agent, temperature stability and viscosity. We manufacture emulsifier’s as per client requirements.

Biocide, Scavengers & Scale Inhibitors

  • Water Systems Cide BKC (Bezylkonnium Chloride based)
  • Water Systems Cide Ald (Aldehyde based)
  • Water Systems Cide TZ (Triazine based)
  • Water Systems Scav ABS (Ammo Bi sulphite based)
  • Water Systems Scale P (Phosphate based)
  • Water Systems Scale TZ (Triazine based)

Completion Chemicals

Bromide and Chloride brines

  • Water Systems Cal Bromide L (Calcium Bromide Liquid)
  • Water Systems Cal Bromide P (Calcium Bromide Powder)
  • Water Systems Sod Bromide L (Sodium Bromide Liquid)
  • Water Systems Sod Bromide P (Sodium Bromide powder)
  • Water Systems Zinc Bromide
  • Water Systems Cal-Zinc Bromide
  • Water Systems Cal Chloride L ( Calcium Chloride Brine )
  • Water Systems is the first and only Bromide ( Brine ) manufacturing company in the region. C1W Completion chemicals are liquids and powder form which used in the oil and gas industry during the completion process of oil or gas well. It is a low solid mud or salt solution or clear brine fluids used for well testing and when a well is completed. It is used for minimizing the formation damage and to also regulate the formation pressure. Water Systems completion bribe/chemicals used as a completion and workover fluid to control wellbore pressures in upstream oil & gas operations.

Corrosion Inhibitor

  • Water Systems Corr-Inhib 231
  • Water Systems Corr-Inhib 232
  • Water Systems Corr-Inhib 233
  • Water Systems Corrosion Inhibitors have prime function as the name suggest is to control or prevent internal corrosion attack from oxygen, cabon dioxide and hydrogen sulphide in oil & gas prodiction systems, injection systems and pipelines. When used it forms like a protective film on all metal surfaces and also protects metal surfaces at very high temperatures.

Get in touch with us for your service