Soundsmith Aida MKII Turntable Cartridge
SKU: 12764559484

Soundsmith Aida MKII Turntable Cartridge

Sale price$1647.00 Regular price$1830.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Soundsmith Aida MKII Turntable CartridgeAIDA MKII A triumph of Soundsmith Engineering, Stereophile Class A rated, a rarity at its price point and for good reasons. The Aida MKII employs a laser drilled Sapphire cantilever with ultra low mass Contact Line stylus; we did this to resolve the challenges of playing the inner grooves with the same level of confidence as the outer. How did we do this? The unique stylus shape of our CL stylus has a sharper playing surface on the faceted diamond,

AIDA MKII

A triumph of Soundsmith Engineering, Stereophile Class “A” rated, a rarity at its price point – and for good reasons.

The Aida MKII employs a laser drilled Sapphire cantilever with ultra-low mass Contact Line stylus; we did this to resolve the challenges of playing the inner grooves with the same level of confidence as the outer. How did we do this? The unique stylus shape of our CL stylus has a “sharper” playing surface on the faceted diamond, allowing it to ride easily into the groove modulations of even the most difficult passages and high frequency information that other cartridges simply cannot trace. The result — a truly superb cartridge, surpassing top MC designs with air, focus and sound staging no cartridge at this price should be able to achieve.

The Aida cartridge is a Stereophile A-rated cartridge, meaning it is in the "price is no object" category and was the cheapest cartridge there.

Soundsmith carefully hand-builds every cartridge, tests them, and keeps accurate records by serial number of their performance. Those that meet or exceed specifications are sold, and the ones that don't are broken down and recycled. 

Soundsmith took moving iron technology and perfected it. This design offers lower effective moving mass, causing the stylus to stay in better contact with the groove walls. High-gain moving coil preamps are not required, as the Aida is designed to be used with a moving magnet preamp.

New EM Series DEMS Design

What is DEMS??

“Sometimes you can judge a book by its cover.” – Peter Ledermann.

2018’s RMAF show was the official launch of Soundsmith’s new ES series of cartridges, where the attendees experienced the latest exploration into overlooked areas of cartridge design and solutions from Soundsmith.

The ES line features not only a dramatic new look, but is a significant evolution of the DEMS system design (Dynamic Energy Management System). The new Soundsmith ES cartridge designs are a significant advancement in cartridge performance due to their ability to direct internal vibrational forces without reflection and disperse them properly to the tone arm. The absence of reflections enables the stylus to stay in far greater statistical contact with the groove walls — a critically important technical refinement. Increased liquidity and reduced “grain,” without loss of detail are some of the immediately discernible advantages of Soundsmith’s new ES models.

The new line also features Azimuth adjustment built-in to each cartridge, as well as the option for electrical isolation for hum-prone systems. (see picture below)

Every cartridge in Soundsmith’s lineup will now feature our sleek new ES body design. The upgrade is far more than cosmetic; the new shape is a departure from the reflective and “boxy” design of many cartridges whose internal construction contribute to uncontrolled vibrational issues adversely affecting performance. Peter says, “Think of how singing in an open field compares with singing in a shower.” Soundsmith has always challenged conventions, looking deeper into nuances of cartridge design that dramatically affect immediate and long term performance. These have included extreme reductions of moving mass and the use of novel materials and designs. The new ES lineup is a continuation of that research and development.

ES Series Mounting

The new ES has some special mounting features that you need to be aware of.

Sometimes when mounting on a grounded metal arm, a cartridge will create hum due to a ground loop. If you experience some low level hum due to ground loop, you can now solve this issue by using the two half-round white rods which are to be placed and used in the OUTER slots, seen on the top of the cartridge. Place them flat side UP.

The rods are made of Alumina, and are insulating, thus allowing ground isolation for your cartridge without compromising the crucial mechanical energy transfer into the tone arm. This energy transfer is maintained due to the use of Alumina, which has the same properties as aluminum, but is non-conductive. Due to the novel body design of the ES cartridge, electrical isolation can still be maintained even though you may use metal screws.

On tone arms that do not allow azimuth adjustment, it is now possible to achieve this adjustment by way of the ES series by using the one full round alumina rod in the center slot only, alternately tightening and loosening the mounting screws by small amounts.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 12764559484

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 1718 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
884EVER
Houston, US
★★★★★ 5
Great privacy screen
Size: 4 Panel-88"W, Color: Grey
Nice item, easy to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 15, 2026
C
Verified Purchase
cara
Battle Creek, US
★★★★★ 5
Great privacy screen
Size: 6 Panel-119"W, Color: Beige
I have a studio apartment and the bathroom is in my bedroom. I bought this to section the area off so guests can use my bathroom without seeing my entire bedroom. This is perfect for that! It looks very nice and offers alot of privacy. The screen is fabric and good quality! I’m a middle aged woman and put it together myself in about 2 hours. Love this!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 27, 2025
M
Verified Purchase
michael cornwell
Waukegan, US
★★★★★ 4
Nice divider 6 panel with wheels.
Size: 6 Panel-119"W, Color: Black, Size: 6 Panel-119"W, Color: Black
The wall works great , and I put it together by myself. I only gave it what I did because I have to move one or two of the panels on one end around a bit daily to make an opening to pass through. I find I have to check the screws that hold those legs/feet on frequently and retighten them. Beyond that everything was pretty good quality. (I ended up magnetizing an Allen wrench to one of the feet.) I also put on motion lights to the rollers so you’ll see them and don’t trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2026
C
Verified Purchase
Carol
Massapequa, US
★★★★★ 5
Room divider
Size: 6 Panel-119"W, Color: Black, Size: 6 Panel-119"W, Color: Black
I was looking for something to separate my two boys and give them both their own space. So far this room divider has worked well. It’s 6 feet tall and the fabric is dark and thick. You won’t see anything on the other side. Good quality and easy to assemble ✅
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 27, 2024
K
Verified Purchase
Karen Moran
Los Angeles, US
★★★★★ 1
Too Cumbersome
Size: 6 Panel-119"W, Color: Black
Didn’t realize there were over 100 pieces to put this thing together. Had I been advised of that I would not have ordered this thing. Wayyyyy too much of a production to put it together. Nope. Returned.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 14, 2026

recommand products