Pay in installments of $35.49 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 14 - Aug 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Tailpipe Kit 78"-88" GM Monte Carlo Regal Cutlass Grand Prix 2.5"inOverview: These Builder Series tailpipes are constructed from 2. 50 inch mandrel bent 16 gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight out the back under the rear bumper. Designed to be used with Side Inlet Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 942553 (50 Series) mufflers. Covered by our 3 year Limited Warranty. Note: Not designed to fit in factory
Overview:
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 942553 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
Features:
Specs:
Applications:
- 1978-1987 Buick Regal 231 CID
- 1978-1980 Buick Regal 305 CID
- 1978-1979 Buick Regal 196 CID
- 1979-1980 Buick Regal 301 CID
- 1980-1981 Buick Regal 265 CID
- 1982-1984 Buick Regal 252 CID
- 1986-1987 Buick Regal 307 CID
- 1978-1987 Chevrolet El Camino 305 CID
- 1978-1984 Chevrolet El Camino 231 CID
- 1978-1979 Chevrolet El Camino 350 CID
- 1978-1979 Chevrolet El Camino 200 CID
- 1979-1982 Chevrolet El Camino 267 CID
- 1980-1984 Chevrolet El Camino 229 CID
- 1985-1987 Chevrolet El Camino 262 CID
- 1978-1983 Chevrolet Malibu 231 CID
- 1978-1981 Chevrolet Malibu 350 CID
- 1978-1983 Chevrolet Malibu 305 CID
- 1978-1979 Chevrolet Malibu 200 CID
- 1979-1981 Chevrolet Malibu 267 CID
- 1980-1983 Chevrolet Malibu 229 CID
- 1978-1984 Chevrolet Monte Carlo 231 CID
- 1978-1988 Chevrolet Monte Carlo 305 CID
- 1978-1979 Chevrolet Monte Carlo 200 CID
- 1979-1982 Chevrolet Monte Carlo 267 CID
- 1980-1984 Chevrolet Monte Carlo 229 CID
- 1985-1988 Chevrolet Monte Carlo 262 CID
- 1978-1984 GMC Caballero 231 CID
- 1985-1987 GMC Caballero 262 CID
- 1982-1983 Oldsmobile Custom Cruiser 307 CID
- 1980-1980 Oldsmobile Cutlass 305 CID
- 1980-1980 Oldsmobile Cutlass 231 CID
- 1980-1980 Oldsmobile Cutlass 260 CID
- 1980-1980 Oldsmobile Cutlass 350 CID
- 1979-1979 Oldsmobile Cutlass Salon 350 CID
- 1985-1986 Oldsmobile Cutlass Salon 307 CID
- 1986-1987 Oldsmobile Cutlass Salon 231 CID
- 1978-1987 Oldsmobile Cutlass Supreme 231 CID
- 1983-1983 Oldsmobile Cutlass Supreme 307 CID
- 1982-1986 Pontiac Bonneville 231 CID
- 1978-1987 Pontiac Grand Prix 231 CID
- 1978-1980 Pontiac Grand Prix 301 CID
Emissions:
- This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 6 reviews
Sort
Product Reviews
★★★★★ 5
Pretty; sturdy; perfect size
Style: Contempo, Style: Contempo
Nice, sturdy little sponge and brush holder for the side of the sink. I was afraid my sink would me too small and spent lots of time trying to find a holder for the rim/countertop area. This one is not too big but fits my dobie and brillo perfectly. My sink is a little too short for a full fledged brush so when I tried to put in the brush I use sometimes it sticks up too much. That's really not the products fault so I won't subtract the score because of it. Also, I decided to put the holder flush against the side closest to me, instead of the side or the back of the sink. If I had chosen that location, the brush sticking out might not be an issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 26, 2016
★★★★★ 4
Yes the suction works on stainless steel!!
Style: Contempo
I've been through many rag holders before including a magnetic one, which broke. But the suction on this sucker (pun intended) is top notch! It doesn't slide around or come off or slide to the bottom of the sink. It just stays put which is so unique for anything with suction cups. The only reason i am giving it 4 stars instead of 5 is that it is quite small. I wish it were a few inches longer so i could easily fit two rags or sponges in the holder. But i have to jam them in and its not pretty. So for the price, i think it should have been bigger. Still a good product because of the functionality of the suction cups.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 3, 2017
★★★★★ 5
Absolutely Perfect
Style: Contempo
This is honestly one of my favorite kitchen purchases (which sounds silly) but it's AWESOME. There's a hole for my dish brush, which is so convenient and keeps it from draining anywhere else AND it has a nice ledge for my sponge. The suction was a little iffy at first, but once it really hunkered down, I've had it for a month and it hasn't fallen since the first day. I LOVE THIS
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 20, 2019
★★★★★ 5
Great product once put on correctly.
Style: Contempo
When I first received it and placed it on, it continued to fall so I almost returned it. However, I found a method online that worked and it has not fallen since even after all the water and soap getting near it. I’ve placed it on a stainless steel sink so not sure if the method works on other surfaces.
Clean the area with soap and water and then make sure there’s no soap residue. Make the water temperature hot and “heat up” both the steel surface and the suction. While it’s still wet, firmly place the suction and make sure it doesn’t move.
That should do the trick!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 1, 2020
★★★★★ 3
Great item to make life more pleasant!
Style: Contempo
A tiny item that makes my life more lovely. No more yucky scrubber residue all over the counter edge, or soap leaking all over from a faulty handle. A sponge can be at hand and I can hang my cloth somewhere besides the top of the faucet. The suction cups stuck well now at first, and I can move it whenever I want. Not to big nor too small. Wire is firm and strong. Will edit if it doesn’t hold up but right now highly recommend!
Edit to add: A bit disappointing that the suction cups are not reliable. Even after carefully cleaning the side of my deep sink with vinegar and washing the suction cups, they come loose about once a day. Giving them a hard push on seems to help, but not a cure. I revised the rating to average 3 stars. It really isn’t a problem in the sink.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 1, 2019
recommand products
Enkei PF01 18x8 5x114.3 Bolt Pattern 40mm Offset - Black Wheel 15-17 WRX / 05-07 STi (SPECIAL ORDER) - 460-880-6640BK
185.40
Spyder Porsche Cayman 05-08 Headlights - Halogen Model Only - DRL LED - Black PRO-YD-P98705-DRL-BK - 5083197
782.50
925 Sterling Silver Jesus Crucifix Russian Orthodox Cross Pendant Necklace
33.90
14k White Gold Jesus Christ Russian Orthodox Crucifix Cross Pendant Necklace
167.91
Cusco SFTY21 4/5-Passenger 7-Point BLK DASH-THROUGH Roll Cage Subaru STi GRB 08-14 (S/O/No Cancel) - 692 270 L20
639.00