SKU: 31928122418

Cylinder 4 Cooling Connection

Sale price$60.26 Regular price$66.95
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Cylinder 4 Cooling ConnectionThis kit is designed to help increase the cooling to the #4 cylinder on the Subaru EJ series engines. This hose kit connects to an existing port on the back of the left hand side of the motor that is blocked off from the factory with a plug. Compatibility: All Subaru EJ Series Motors Included in the kit: 10 Inches of Gates Engine Coolant Hose 10 AN 45 Degree Push To Connect Fitting 10 AN to Metric Straight Thread AdapterAluminum Crush Washer for

This kit is designed to help increase the cooling to the #4 cylinder on the Subaru EJ series engines. This hose kit connects to an existing port on the back of the left hand side of the motor that is blocked off from the factory with a plug.

Compatibility:
All Subaru EJ Series Motors

Included in the kit:

10 Inches of Gates Engine Coolant Hose
-10 AN 45 Degree Push To Connect Fitting
-10 AN to Metric Straight Thread Adapter
Aluminum Crush Washer for Metric Straight Thread Connection
304 Stainless Steel 5/8” Barbed Tee Connection
Qty 4 Stainless Steel Hose Clamps
12mm Allen Socket with 1/2” Square Drive


Basic Installation Steps:

  • Drain coolant from engine below the level of the plug on the back of the engine

  • Remove factory coolant plug using the supplied 12mm allen socket

  • Install straight thread to 10AN adapter with included aluminum crush washer

  • Test fit 10AN 45 degree fitting with hose attached

  • Locate heater core hose that connects to firewall and mark where to cut and install stainless tee fitting

  • Trim included Gates heater hose (different chassis and models require slightly different hose lengths)

  • Install tee connector inline with existing heater hose with the center connection being used for the provided line, use hose clamps on all 4 barbed hose connections

  • Tighten 10AN connection, ensure the new hose does not rub on any other parts in the engine bay paying close attention to the steering shaft

  • Refill coolant and properly “burp” the system to remove all air introduced during the installation

    *Note: If you see corrosion or surface imperfections on the sealing face of the block you can apply Permatex or similar sealing material to the metric straight threads on the adapter fitting into the block for a secondary sealing point. NEVER apply any type of sealant or tape to the threads on AN fittings.

This is a universal kit, depending on the year and chassis this is being installed on the length of heater hose and the point at which you connect into the factory hoses will be slightly different. We will be posting more detailed instructions and photos for each unique application very soon.

The intent of this kit is to solve an imbalance in the factory cooling system on the EJ series motors. Subaru designed the cooling system to ensure that cylinder #4 ran slightly hotter than the rest of the cylinders, this allowed them to then tune the system so that if knock were to occur is would happen first on cylinder #4. While this simplifies the control system on a factory car it doesn’t allow tuners to get the most potential out of the engines, the tune is basically limited by an intentional design flaw in the cooling system. Since this type of modification (not just our kit) can effect knock response on your engine we recommend consulting with your tuner before installation and having your tuner review logs after installation. Professional installation is recommended.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 31928122418

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 1053 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
M. Altvater
Carnegie, US
★★★★★ 5
Coffee!
Color: Silver
Holds coffee, looks nice
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 19, 2025
G
Verified Purchase
Gabriel marin
Lake Worth, US
★★★★★ 5
Perfect for Lattes
Size: 20 Ounces
Good for steaming 8-10 oz of milk. The nifty tool is good for scooping out your puck.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2026
J
Verified Purchase
JeffTryHard
Grantham, US
★★★★★ 5
Almost blew up my microwave
Size: 20 Ounces, Size: 20 Ounces
TL;DR "A hilarious microwave mistake turned into a great home cafe upgrade. This 20oz cup is straightforward to handle, looks incredibly professional, and holds a level of heat that will literally burn you if you aren't careful." . Bought this for homemade coffee brewing, just to spice things up. But as I go ahead to heat up my new shiny stainless steel milk frother cup in the microwave, whoopdy doo. Ya can’t put stainless in the microwave! Regardless, it’s still a straightforward frother cup to handle, making it a great dollar investment for upgrading my home cafe setup. . 1. Spotless Stainless Steel: Its sleek appearance made me feel professional in the hands of an amateur like moi. Great quality! 2. Temperature Retention: I accidentally burnt myself because it stayed so hot, but that is a major positive. Proving the insulation works perfectly and keeps the milk piping hot. 3. Size: The 20oz capacity is accurate, providing the perfect amount of space for frothing without any overflow.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 6, 2026
K
Verified Purchase
Kayla
Grantham, US
★★★★★ 5
Sturdy
Size: 20 Ounces
Great pitcher
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2026
Q
Verified Purchase
Q Nguyen
San Leandro, US
★★★★★ 4
Decent pitcher
Size: 11.8 Ounces
Smaller than expected. I frothed 5 oz of milk and it was almost a mess.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 16, 2025

recommand products